Sage Journals: Discover world-class research

Retricted access

Research article

First published 2006-4

Optimization of Pinion Roughing of Spiral Bevel and Hypoid Gear

J-G Li, S-M Mao, J-L He [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2020

Modeling of surface roughness in a novel magnetorheological gear profile finishing process

Ravi Datt Yadav, Anant Kumar Singh, Kunal Arora

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2022-11

An adhesive wear model of rough gear surface considering modified load distribution factor

Haihang Wang, Changjiang Zhou, Bo Hu [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2007-07

Gear Surface Roughness Induced Noise Prediction Based on a Linear Time-varying Model with Sliding Friction

Seungbo Kim, Rajendra Singh

Journal of Vibration and Control

Retricted access

Research article

First published 2018-11

Investigations on surface roughness and tribology of miniature brass gears manufactured by abrasive water jet machining

Thobi Phokane, Kapil Gupta, Munish Kumar Gupta

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2020-6

Influence of distribution parameters of rough surface asperities on the contact fatigue life of gears

Wen Yuqin, Tang Jinyuan, Zhou Wei

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2021-3

Correlation between surface roughness parameters and contact stress of gear

Yang Duo, Tang Jinyuan, Zhou Wei [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2020-12

Influence of gear surface roughness on the pitting and micropitting life

Edwin Bergstedt, Jiachun Lin, Ulf Olofsson

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Research article

First published 2020-2

Effect of roughness on meshing power loss of planetary gear set considering elasto-hydrodynamic lubrication

Xinlei Wang, Changle Xiang, Chunming Li [...]

Advances in Mechanical Engineering

Retricted access

Research article

First published 2006-2

Theoretical and practical investigations regarding the influence of the Serration's geometry and position on the tooth surface roughness by shaving with plunge gear cutter

R-H Hsu, Z-H Fong

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results