Sage Journals: Discover world-class research

Open access

Research article

First published 2021-1

Laser de-coating of hard DLC coatings from tungsten carbide cutting tool

Siti Rozakiyah Assurin, Paul Mativenga, Fatema Rajab [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2010-12

Action of oil additives when used in DLC coated contacts

B. Podgornik, J. Vižintin

Tribology - Materials,Surfaces & Interfaces

Retricted access

Research article

First published 2012-9

Formation of tribologically beneficial layer on counter surface with smart chemical design of DLC coating in fuel contact

F Gustavsson, P Forsberg, V Renman [...]

Tribology - Materials,Surfaces & Interfaces

Retricted access

Research article

First published 2026

Tribological behavior of DLC/AlCrN coatings on heat-treated grey cast iron under SAE 10W-30 lubrication

Govind Murari, Bharat Kumar, Saiful Wali Khan [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2026-2

Tribological and mechanical properties of Ti/V/N-containing graded DLC coatings

Ferhat Bulbul, Ihsan Efeoglu

Surface Engineering

Retricted access

Research article

First published 2019-4

Wear behaviour of boronized and duplex-treated AISI 4140 steel against DLC-coated boronized AISI 4140 disc

Aditya K. Litoria, Akshay A. Joshi, Manoj D. Joshi [...]

Surface Engineering

Retricted access

Research article

First published 2024-5

Micro-structural,electrical,and tribological properties of SiC/DLC composite coating grown by PLD on steel

Chunlai Yang, Jiabao Pan, Manman Xu [...]

Surface Engineering

Retricted access

Research article

First published 2015-2

Structural and tribological properties of TiC-DLC coatings deposited by RCAE-PVD at various bias voltages

M. J. Mosayebi, S. R. Hosseini

Surface Engineering

Retricted access

Research article

First published 2019-4

Erosion wear characterisation of DLC and AlCrN-based coated AISI-304/316 steels

Gursharan Singh, Sukhinderpal Singh, Jasmaninder Singh Grewal

Surface Engineering

Retricted access

Research article

First published 2024-8

Evaluation of the performance of DLC Coatings (ta-C) of WC-Co tools while machining Al7075 alloy

Fatih Hayati Çakir, Anıl Yilmaz, Zerrin Sert

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results