The aim of the current study was the evaluation of the bias voltage influence on the structural and tribological properties of titanium carbide dispersed in diamond-like carbon (TiC-DLC) coatings. To this end, TiC-DLC was deposited on 440C stainless steel substrate by physical vapour deposition method with titanium target and acetylene gas sources. The coating process was performed at the constant chamber pressure of 5 mbar and the bias voltage in the range of 100 to 400 V. The coatings were characterised by means of field emission SEM, X-ray diffraction and Raman spectroscopy. Pin on disc test was used for studying the wear behaviour of the coatings. The best tribological properties of coatings were reached at the bias voltage of 200 V. Overall, raising the bias voltage up to 200 V led to the decrease in the wear and friction initially, while getting the higher voltage (up to 400 V) reversed the process.
LoKH, ShekCH and LaiJKL: ‘Recent developments in stainless steels’, Mater. Sci. Eng. R, 2009, R65, 39–104.
2.
LoKH, ChengFT and ManHC: ‘Laser transformation hardening of AISI 440C martensitic stainless steel for higher cavitation erosion resistance’, Surf. Coat. Technol., 2003, 173, 96–104.
3.
ErdemirA, FontaineJ and DonnetC: ‘An overview of superlubricity in diamond-like carbon films’, in‘Tribology of diamond-like carbon films’, (ed. DonnetC and ErdemirA), 237–262; 2008, Springer.
4.
DonnetC and GrillA: ‘Friction control of diamond-like carbon coatings’, Surf. Coat. Technol., 1997, 94–95, 456–462.
5.
WangL, WanSh, WangSC, WoodRJK and XueQJ: ‘Gradient DLC-based nanocomposite coatings as a solution to improve tribological performance of aluminum alloy’, Tribol. Lett., 2010, 38, 155–160.
6.
ShahaKP, PeiYT, Martinez-MartinezD, Sanchez-LopezJC and De HossonJThM: ‘Effect of process parameters on mechanical and tribological performance of pulsed-DC sputtered TiC/a-C:H nanocomposite films’, Surf. Coat. Technol., 2010, 205, 2633–2642.
7.
BecS, TonckA and FontaineJ: ‘Nanoindentation and nanofriction on DLC films’, Philos. Mag., 2006, 86, 5465–5476.
8.
MaG, LinG, SunG, ZhangH and WuH: ‘Characteristics of DLC containing Ti and Zr films deposited by reactive magnetron sputtering’, Physics Procedia, 2011, 18, 9–15.
9.
WiklundU, NordinM, WanstrandO and LarssonM: ‘Evaluation of a flexible physical vapor deposited TiC–C coating system’, Surf. Coat. Technol., 2000, 124, 154–161.
10.
DellaCorteCh: ‘Nickel-titanium alloys: corrosion ‘proof’ alloys for space bearing, components and mechanism applications’, NASA/TM-2010-216334, John H. Glenn Research Center, Ohio, USA, 2010.
11.
MiyoshiK, PohlchuckB, StreetKW, ZabinskiJS, SandersJH, VoevodinAA and WuRLC: ‘Sliding wear and fretting wear of diamond like carbon-based, functionally graded nanocomposite coatings’, Wear, 1999, 225–229, 65–73.
12.
MiyoshiK, StreetKW, ZabinskiJS, SandersJH and VoevodinAA: ‘Friction and wear properties of a-DLC-based functionally gradient nanocomposite coatings’, NASA/TM-1998-206962, Lewis Research Center, Ohio, USA, 1998.
13.
ShahaKP, PeiYT, MartinezD and De HossonJThM: ‘Influence of surface roughness on the transfer film formation and frictional behavior of TiC/a-C nanocomposite coatings’, Tribol. Lett., 2011, 41, 97–101.
14.
PeiYT, GalvanD and De HossonJThM: ‘Nanostructure and properties of TiC/a-C:H composite coatings’, Acta Mater., 2005, 53, 4505–4521.
15.
ErnstK. -H and OralB: ‘On the chemistry at the Si, Ti-doped a-C:H/TiC interface’, Thin Solid Films, 2004, 446, 72–77.
16.
GwoJ, ChuCh. -L, TsaiM. -J and LeeSh: ‘Enhancement of Ti-containing hydrogenated carbon (Ti-C:H) films by high-power plasma-sputtering’, Appl. Surf. Sci., 2012, 258, 3433–3437.
17.
LiangC. -H, et al: ‘The influence of microstructural variations on mechanical and tribological properties of low-friction TiC/diamond- like carbon nanocomposite films’, Ceram. Int., 2014, http://dx.doi.org/10.1016/j.ceramint.2014.05.047.
18.
YangY. -H, et al: ‘Microstructure and phase forming behaviour of chrome based multi-composition nitride coatings with nanolayer structures’, Ceram. Int., 2014, http://dx.doi.org/10.1016/j.ceramint.2014.03.114.
19.
FontaineJ, DonnetC, GrillA and LeMogneT: ‘Tribochemistry between hydrogen and diamond-like carbon films’, Surf. Coat. Technol., 2001, 146–147, 286–291.
20.
WangP, WangX, ChenY, ZhangG, LiuW and ZhangJ: ‘The effect of applied negative bias voltage on the structure of Ti-doped a-C:H films deposited by FCVA’, Appl. Surf. Sci., 2007, 253, 3722–3726.
LiuX, WangL and XueQ: ‘A novel carbon-based solid-liquid duplex lubricating coating with super-high tribological performance for space applications’, Surf. Coat. Technol., 2011, 205, 2738–2746.
23.
DingX. -zh, TayBK, LauSP, ZhangP and ZengXT: ‘Structural and mechanical properties of Ti-containing diamond-like carbon films deposited by filtered cathodic vacuum arc’, Thin Solid Films, 2002, 408, 183–187.
24.
YangB, HuangZH, LiuCS, ZengZY, FanXJ and FuDJ: ‘Characterization and properties of Ti-containing amorphous carbon nanocomposite coatings prepared by middle frequency magnetron sputtering’, Appl. Surf. Sci., 2006, 200, 5812–5818.
