Sage Journals: Discover world-class research

Retricted access

Research article

First published 2018-3

Understanding the occurrence of the surface turbulence in a nonpressurized bottom gating system: Numerical simulation of the melt flow pattern

Ali Kheirabi, Amir Baghani, Ahmad Bahmani [...]

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Retricted access

Research article

First published 2022-04-08

Performance Improvement in single-gate organic transistors with contacts at top and bottom: Additional p + region insertion near source and drain

Sakshi Gupta, Poornima Mittal, Pradeep Juneja

Main Group Chemistry

Retricted access

Research article

First published 2022-07-12

Analysis of electrical characteristics and electroluminescent efficiency of field induced contact-DGOLET 1

Sandeep Kumar Ojha, Brijesh Kumar

Main Group Chemistry

Open access

Research article

First published 2015-5

Evaluation of hydrodynamic forces on turbine ring gate during emergency shutdown process

Zhenwei Mo, Juliang Xiao, Gang Wang

Advances in Mechanical Engineering

Retricted access

Research article

First published 2026-2

Analysis of 3-D flow pattern and curing during manufacturing of composite wind turbine blades

Ramin K. Ranjbar, Bob Minaie

Wind Engineering

Retricted access

Research article

First published 2007-2

Influence of tilt filling on Weibull modulus of 2L99 aluminium investment castings

M. Cox, R. A. Harding

Materials Science and Technology

Retricted access

Research article

First published 2018-3

Biased flows in slab moulds induced by slide gates. Part I: experimental measurements and flow simulation

V. Cedillo, R. D. Morales

Ironmaking & Steelmaking: Processes,Products and Applications

Open access

Research article

First published 2023-6

Gating system design and casting simulation application for the grooved worm wheel by using zinc alloy sand casting process

Chul Kyu Jin

Advances in Mechanical Engineering

Retricted access

Research article

First published 2014-2

Water modelling of effects of pouring basin and sprue geometry on entrance of air bubbles into mould

M. Afsharpour, B. Homayun, S. M. A. Boutorabi

Materials Science and Technology

Retricted access

Research article

First published 2017-5

Experimental and numerical study on formation mechanism of linear macro-segregation in low-pressure die casting of Al–Cu–Mn–Ti Alloy

Ye Wang, Shiping Wu, Xiang Xue [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Search results