Sage Journals: Discover world-class research

Free access

Research article

First published 2003-5

Simulation of abrasive waterjet machining based on unit event features

A Lebar, M Junkar

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2006-5

Profile Cutting on Alumina Ceramics by Abrasive Waterjet. Part 2: Cutting Performance Models

J Wang, H Liu

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2006-5

Profile Cutting on Alumina Ceramics by Abrasive Waterjet. Part 1: Experimental Investigation

J Wang, H Liu

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Free access

Research article

First published 2015-12

Influence of machining parameters on part geometrical error in abrasive waterjet offset-mode turning

Mehdi Zohoor, Iman Zohourkari, Francesco Cacciatore [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2012-9

A study on the prediction of kerf angle in abrasive waterjet machining of rocks

Izzet Karakurt, Gokhan Aydin, Kerim Aydiner

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2025-8

Integrated error modeling for abrasive waterjet cutting at various nozzle tilt angle

Mingming Du, Wei Zhong, Zhenming Wang [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2025-11

Utilisation of glass waste as an abrasive in abrasive waterjet machining

Gokhan Aydin, Mohammad Reza Amiri, Serkan Kaya [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2011-8

Finite element modelling of a single-particle impact during abrasive waterjet milling

S Anwar, D A Axinte, A A Becker

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Free access

Research article

First published 2003-12

Machinability of titanium alloy (Ti’6Al’4V) by abrasive waterjets

Y W Seo, M Ramulu, D Kim

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2025

Enhanced strategies for suppressing hole surface damage in ceramic matrix composites during abrasive waterjet machining

Yifei Zhang, Dun Liu, Hankun Bao [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Search results