Search results: Sage Journals

Restricted accessReview articleFirst published September, 2022

Nanoparticles reinforced Al-matrix composites fabricated by combination of pre-distribution and deformation: A review

Dong-Dong Zhang, Xi-Ya He, Yu Liu [...]

Materials Science and Technology

Restricted accessResearch articleFirst published July, 2017

Effect of Al 2 O 3 nanoparticle reinforcement on the mechanical and high-temperature tribological behavior of Al-7075 alloy

Yaping Bai, Yongchun Guo, Jianping Li [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published January, 2023

Influence of Al 2 O 3 nanoparticles in a lubricating oil for reciprocating engines

Polyana Barbosa de Paula, Ana Romero Gutiérrez, Reyes García-Contreras [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published May, 2016

Microstructure and brazeability of SiC nanoparticles reinforced Al–9Si–20Cu produced by induction melting

A. Sharma, D.-U. Lim, J.-P. Jung

Materials Science and Technology

Restricted accessResearch articleFirst published February, 2021

Simultaneous attainment of particle dispersion and surface modification of Al 2 O 3 nanoparticles via wet–jet milling

Chaofu Zhang, Yuichi Tominaga, Kimiyasu Sato [...]

Journal of Composite Materials

Restricted accessResearch articleFirst published February, 2013

Enhancement in thermal properties of poly(vinyl alcohol) nanocomposites reinforced with Al 2 O 3 nanoparticles

Shadpour Mallakpour, Mohammad Dinari

Journal of Reinforced Plastics and Composites

Restricted accessResearch articleFirst published April, 2026

Investigation of Al/Mg composite behaviour by the adaptation of SiC and Al 2 O 3 nanoparticle via electromagnetic stir cast route

Vinayagam Mohanavel, Ravindra Pratap Singh, S Sekar [...]

Materials Science and Technology

Restricted accessResearch articleFirst published April, 2020

Fabrication of Al5083 surface hybrid nanocomposite reinforced by CNTs and Al 2 O 3 nanoparticles using friction stir processing

Farhad Ostovan, Sattar Amanollah, Meysam Toozandehjani [...]

Journal of Composite Materials

Restricted accessResearch articleFirst published February, 2023

Effect of Cu-Al 2 O 3 nanoparticles on the performance of chlorinated polyethylene nanocomposites

MT Ramesan, S Suvarna

Progress in Rubber,Plastics and Recycling Technology

Restricted accessResearch articleFirst published 2024

Effect of surface modification on the thermophysical properties of ethylene glycol dispersed with Al 2 O 3 nanoparticles for solar thermal applications

Ardhani Satya Bhanu Prasanna, Koona Ramji

Proceedings of the Institution of Mechanical Engineers,Part N: Journal of Nanomaterials,Nanoengineering and Nanosystems

Restricted accessReview articleFirst published September, 2022

Nanoparticles reinforced Al-matrix composites fabricated by combination of pre-distribution and deformation: A review

Dong-Dong Zhang, Xi-Ya He, Yu Liu [...]

Materials Science and Technology

Restricted accessResearch articleFirst published July, 2017

Effect of Al 2 O 3 nanoparticle reinforcement on the mechanical and high-temperature tribological behavior of Al-7075 alloy

Yaping Bai, Yongchun Guo, Jianping Li [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published January, 2023

Influence of Al 2 O 3 nanoparticles in a lubricating oil for reciprocating engines

Polyana Barbosa de Paula, Ana Romero Gutiérrez, Reyes García-Contreras [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Restricted accessResearch articleFirst published May, 2016

Microstructure and brazeability of SiC nanoparticles reinforced Al–9Si–20Cu produced by induction melting

A. Sharma, D.-U. Lim, J.-P. Jung

Materials Science and Technology

Restricted accessResearch articleFirst published February, 2021

Simultaneous attainment of particle dispersion and surface modification of Al 2 O 3 nanoparticles via wet–jet milling

Chaofu Zhang, Yuichi Tominaga, Kimiyasu Sato [...]

Journal of Composite Materials

Restricted accessResearch articleFirst published February, 2013

Enhancement in thermal properties of poly(vinyl alcohol) nanocomposites reinforced with Al 2 O 3 nanoparticles

Shadpour Mallakpour, Mohammad Dinari

Journal of Reinforced Plastics and Composites

Restricted accessResearch articleFirst published April, 2026

Investigation of Al/Mg composite behaviour by the adaptation of SiC and Al 2 O 3 nanoparticle via electromagnetic stir cast route

Vinayagam Mohanavel, Ravindra Pratap Singh, S Sekar [...]

Materials Science and Technology

Restricted accessResearch articleFirst published April, 2020

Fabrication of Al5083 surface hybrid nanocomposite reinforced by CNTs and Al 2 O 3 nanoparticles using friction stir processing

Farhad Ostovan, Sattar Amanollah, Meysam Toozandehjani [...]

Journal of Composite Materials

Restricted accessResearch articleFirst published February, 2023

Effect of Cu-Al 2 O 3 nanoparticles on the performance of chlorinated polyethylene nanocomposites

MT Ramesan, S Suvarna

Progress in Rubber,Plastics and Recycling Technology

Restricted accessResearch articleFirst published 2024

Effect of surface modification on the thermophysical properties of ethylene glycol dispersed with Al 2 O 3 nanoparticles for solar thermal applications

Ardhani Satya Bhanu Prasanna, Koona Ramji

Proceedings of the Institution of Mechanical Engineers,Part N: Journal of Nanomaterials,Nanoengineering and Nanosystems