Sage Journals: Discover world-class research

Retricted access

Research article

First published 2024-1

A comprehensive study on Hertzian contact stress behaviour of engineering thermoplastic gears using 3D finite element analysis

AP Sugunesh, A Johnney Mertens

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2024-5

Disparate Contact Stress Behavior of Thermoplastic Gears against Steel Gear using 2D and 3D FEA

AP Sugunesh, A Johnney Mertens

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Open access

Abstract

First published 2017-9

Contact Stresses in a Fixed-Bearing Total Ankle Replacement

Nicoló Martinelli, Silvia Baretta, Alberto Bianchi Castagnone Prati [...]

Foot & Ankle Orthopaedics

Retricted access

Research article

First published 2000-08

Effects of Friction on Three-Dimensional Contact Stresses in Pin-Loaded Laminated Composites

Chao Zhang, R. Ganesan, Suong V. Hoa

Journal of Composite Materials

Open access

Research article

First published 2014

A Numerical Simulation of Elastoplastic Contact Analysis of Compressor by Overspeeding

Aihua Liao, Xiaodong Chai, Jian Yang

Advances in Mechanical Engineering

Retricted access

Research article

First published 2005

Evaluation of Predicted Pavement Response with Measured Tire Contact Stresses

Dae-Wook Park, Emmanuel Fernando, Joe Leidy

Transportation Research Record: Journal of the Transportation Research Board

Retricted access

Research article

First published 1998

Three-Dimensional Finite Element Study on Effects of Nonlinear Temperature Gradients in Concrete Pavements

Ivindra Pane, Will Hansen, Ashraf R. Mohamed

Transportation Research Record: Journal of the Transportation Research Board

Open access

Research article

First published 2020-12

Research on bolt pre-tightening and relaxation mechanism under transverse load

Dawei Gao, Jiacheng Gong, Zhongling Tian [...]

Advances in Mechanical Engineering

Retricted access

Research article

First published 2009-7

Estimating clamping pressure distribution and stiffness in aircraft bolted joints by finite-element analysis

R H Oskouei, M Keikhosravy, C Soutis

Proceedings of the Institution of Mechanical Engineers,Part G: Journal of Aerospace Engineering

Retricted access

Research article

First published 2019-6

A progressive damage model for 3D woven composites under compression

Huaiyu Lu, Licheng Guo, Gang Liu [...]

International Journal of Damage Mechanics

Search results