Tissue Engineering Part A: Research Advances

Adipose-derived stem cells (ASCs) are a widely investigated type of mesenchymal stem cells with great potential for musculoskeletal regeneration. However, the use of ASCs is complicated by their cellular heterogeneity, which exists at both the population and single-cell levels. This study demonstrates a live-cell assay to investigate gene expression in ASCs undergoing osteogenesis using fluorescently tagged DNA hybridization probes called molecular beacons. A molecular beacon was designed to target the mRNA sequence for alkaline phosphatase (ALPL), a gene characteristically expressed during early osteogenesis. The percentage of cells expressing this gene in a population was monitored daily to quantify the uniformity of the differentiation process. Differentiating ASC populations were repeatedly measured in a nondestructive fashion over a 10-day period to obtain temporal gene expression data. Results showed consistent expression patterns for the investigated osteogenic genes in response to induction medium. Peak signal level, indicating when the most cells expressed ALPL at once, was observed on days 3–5. The differentiation response of sample populations was generally uniform when assessed on a well-by-well basis over time. The expression of alkaline phosphatase is consistent with previous studies of osteogenic differentiation, suggesting that molecular beacons are a viable means of monitoring the spatiotemporal gene expression of live, differentiating ASCs.

In a general view of anatomy, intervertebral disc is composed of three parts: annulus fibrosus (AF), nucleus pulposus (NP), and cartilage endplate (CEP). Recently, several types of stem cells were successfully isolated from these corresponding regions, but up to now, no research was performed about which kind of stem cells is the most efficient candidate for NP tissue engineering or for stem cell-based disc regeneration therapy. In this study, we compared the regenerative potentials of the above-mentioned three kinds of disc-derived stem cells with that of the classic bone marrow (BM)-mesenchymal stem cells (MSCs) in a rabbit disc degeneration model. By magnetic resonance imaging (MRI), X-ray, histology, etc. evaluations, we found that cartilage endplate-derived stem cells (CESCs) showed superior capacity compared with the annulus fibrosus-derived stem cells (AFSCs), nucleus pulposus-derived stem cells (NPSCs), and BM-MSCs (p<0.05); additionally, when comparing the CESC group with the normal control group, there existed no statistical difference in X-ray (p>0.05). Those results demonstrated that the CESC-seeded alginate construct performed the most powerful ability for NP regeneration, while AFSCs showed the most inferior potency, NPSCs and BM-MSCs had similar regenerative capacity and located in the middle. All in all, our study showed that CESCs might act as an efficient seed cell source for NP tissue engineering, which paved a new way for the biological solution of disc degeneration diseases.

The phenotype of articular chondrocytes is dependent on the cytoskeleton, specifically the actin microfilament architecture. Articular chondrocytes in monolayer culture undergo dedifferentiation and assume a fibroblastic phenotype. This process can be reversed by altering the actin cytoskeleton by treatment with cytochalasin. Whereas dedifferentiation has been studied on chondrocytes isolated from the whole cartilage, the effects of cytoskeletal alteration on specific zones of cells such as superficial zone chondrocytes are not known. Chondrocytes from the superficial zone secrete superficial zone protein (SZP), a lubricating proteoglycan that reduces the coefficient of friction of articular cartilage. A better understanding of this phenomenon may be useful in elucidating chondrocyte dedifferentiation in monolayer and accumulation of the cartilage lubricant SZP, with an eye toward tissue engineering functional articular cartilage. In this investigation, the effects of cytoskeletal modulation on the ability of superficial zone chondrocytes to secrete SZP were examined. Primary superficial zone chondrocytes were cultured in monolayer and treated with a combination of cytoskeleton modifying reagents and transforming growth factor β (TGFβ) 1, a critical regulator of SZP production. Whereas cytochalasin D maintains the articular chondrocyte phenotype, the hallmark of the superficial zone chondrocyte, SZP, was inhibited in the presence of TGFβ1. A decrease in TGFβ1-induced SZP accumulation was also observed when the microtubule cytoskeleton was modified using paclitaxel. These effects of actin and microtubule alteration were confirmed through the application of jasplakinolide and colchicine, respectively. As Rho GTPases regulate actin organization and microtubule polymerization, we hypothesized that the cytoskeleton is critical for TGFβ-induced SZP accumulation. TGFβ-mediated SZP accumulation was inhibited by small molecule inhibitors ML141 (Cdc42), NSC23766 (Rac1), and Y27632 (Rho effector Rho Kinase). On the other hand, lysophosphatidic acid, an upstream activator of Rho, increased SZP synthesis in response to TGFβ1. These results suggest that SZP production is dependent on the functional cytoskeleton, and Rho GTPases contribute to SZP accumulation by modulating the actions of TGFβ.

Growth factor delivery systems incorporating chondroprogenitor cells are an attractive potential treatment option for damaged cartilage. The rapid isolation, processing, and implantation of therapeutically relevant numbers of autologous chondroprogenitor cells, all performed “in-theatre” during a single surgical procedure, would significantly accelerate the clinical translation of such tissue engineered implants by avoiding the time, financial and regulatory challenges associated with in vitro cell expansion, and differentiation. The first objective of this study was to explore if rapid adherence to a specific substrate could be used as a simple means to quickly identify a subpopulation of chondroprogenitor cells from freshly digested infrapatellar fat pad (IFP) tissue. Adhesion of cells to tissue culture plastic within 30 min was examined as a mechanism of isolating subpopulations of cells from the freshly digested IFP. CD90, a cell surface marker associated with cell adhesion, was found to be more highly expressed in rapidly adhering cells (termed “RA” cells) compared to those that did not adhere (termed “NA” cells) in this timeframe. The NA subpopulation contained a lower number of colony forming cells, but overall had a greater chondrogenic potential but a diminished osteogenic potential compared to the RA subpopulation and unmanipulated freshly isolated (FI) control cells. When cultured in agarose hydrogels, NA cells proliferated faster than RA cells, accumulating significantly higher amounts of total sGAG and collagen. Finally, we sought to determine if cartilage tissue could be engineered by seeding such FI cells into a transforming growth factor-β3 delivery hydrogel. In such a system, both RA and NA cell populations demonstrated an ability to proliferate and produced a matrix rich in sGAG (∼2% w/w) that stained positively for type II collagen; however, the tissues were comparable to that generated using FI cells. Therefore, while the results of these in vitro studies do not provide strong evidence to support the use of selective substrate adhesion as a means to isolate chondroprogenitor cells, the findings demonstrate the potential of combining a growth factor delivery hydrogel and FI IFP cells as a single stage therapy for cartilage defect repair.

The aim of this study was to examine the effects of human umbilical cord blood-derived CD34-positive endothelial progenitor cells (CD34+ EPCs) on osteoblastic differentiation of cultured human periosteal-derived osteoblasts (POs). CD34+ cells from human umbilical cord blood were sorted to purify more EPCs in characterization. These sorted cells showed CD31, VE-cadherin, and KDR expression as well as CD34 expression and formed typical tubes in Matrigel. These sorted cells were referred to as human cord blood-derived CD34+ EPCs. In in vivo bone formation using a miniature pig model, the newly formed bone was clearly examined in defects filled with polydioxanone/pluronic F127 (PDO/Pluronic F127) scaffolds containing either human umbilical cord blood-derived CD34+ EPCs and POs or human umbilical vein endothelial cells (HUVEC) and POs; however, the new bone had the greatest density in the defect treated with CD34+ EPCs and POs. Osteoblastic phenotypes of cultured human POs using ALP activity and von Kossa staining were also more clearly found in CD34+ EPC-conditioned medium than CD34-negative (CD34−) cell-conditioned medium, whereas HUVEC-conditioned medium had an intermediate effect. PCR array for common cytokines and growth factors showed that the secretion of interleukin (IL)-1β was significantly higher in CD34+ EPCs than in HUVEC, followed by level in CD34− cells. In addition, IL-1β also potently and dose dependently increased ALP activity and mineralization of POs in culture. These results suggest that human umbilical cord blood-derived CD34+ EPCs stimulates osteoblastic differentiation of cultured human POs. The functional role of human umbilical cord blood-derived CD34+ EPCs in increasing the osteogenic phenotypes of cultured human POs may depend on IL-1β secreted from human umbilical cord blood-derived CD34+ EPCs.

Pluripotent embryonic stem cells (ESCs) are capable of differentiating into all mesoderm-derived cell lineages, including endothelial, hematopoietic, and cardiac cell types. Common strategies to direct mesoderm differentiation of ESCs rely on exposing the cells to a series of biochemical and biophysical cues at different stages of differentiation to promote maturation toward specific cell phenotypes. Shear forces that mimic cardiovascular physiological forces can evoke a myriad of responses in somatic and stem cell populations, and have, thus, been studied as a means to direct stem cell differentiation. However, elucidating the effects of shear pre-conditioning on the subsequent vascular differentiation and morphogenesis of ESCs has yet to be examined. In this study, ESC monolayers were subjected to physiological shear (5 dyn/cm²) or static conditions for 2 days on collagen IV-coated substrates before initiating embryoid body (EB) differentiation. Immediately after the pre-conditioning period, shear pre-conditioned and statically cultured ESCs exhibited similar morphologies and largely retained a pluripotent phenotype; however, ESCs exposed to fluid shear expressed increased levels of endothelial marker genes Flk-1 (∼3-fold), VE-cadherin (∼3-fold), and PECAM (∼2-fold), compared with statically cultured ESCs. After 7 days of EB culture, ∼70% of EBs formed from shear pre-conditioned ESCs expressed significantly higher levels of endothelial marker genes compared with EBs formed from statically cultured ESCs. Interestingly, unlike EBs formed from statically cultured ESCs, EBs formed from fluid shear stress pre-conditioned ESCs exhibited a centrally localized region of VE-cadherin⁺ cells that persisted for at least 10 days of differentiation. These results demonstrate that fluid shear stress pre-conditioning not only promotes ESC endothelial gene expression but also subsequently impacts the organization of endothelial cells within EBs. Together, these studies highlight a novel approach to promote in vitro morphogenesis of developmental vasculogenic models and potentially promote pre-vascularization of tissue-engineered constructs derived from pluripotent stem cells.

The microenvironment plays a vital role in both the maintenance of stem cells in their undifferentiated state (niche) and their differentiation after homing into new locations outside this niche. Contrary to conventional in-vitro culture practices, the in-vivo stem cell microenvironment is physiologically crowded. We demonstrate here that re-introducing macromolecular crowding (MMC) at biologically relevant fractional volume occupancy during chemically induced adipogenesis substantially enhances the adipogenic differentiation response of human bone marrow-derived mesenchymal stem cells (MSCs). Both early and late adipogenic markers were significantly up-regulated and cells accumulated 25–40% more lipid content under MMC relative to standard induction cocktails. MMC significantly enhanced deposition of extracellular matrix (ECM), notably collagen IV and perlecan, a heparan sulfate proteoglycan. As a novel observation, MMC also increased the presence of matrix metalloproteinase −2 in the deposited ECM, which was concomitant with geometrical ECM remodeling typical of adipogenesis. This suggested a microenvironment that was richer in both matrix components and associated ligands and was conducive to adipocyte maturation. This assumption was confirmed by seeding undifferentiated MSCs on decellularized ECM deposited by adipogenically differentiated MSCs, Adipo-ECM. On Adipo-ECM generated under crowding, MSCs differentiated much faster under a classical differentiation protocol. This was evidenced throughout the induction time course, by a significant up-regulation of both early and late adipogenic markers and a 60% higher lipid content on MMC-generated Adipo-ECM in comparison to standard induction on tissue culture plastic. This suggests that MMC helps build and endow the nascent microenvironment with adipogenic cues. Therefore, MMC initiates a positive feedback loop between cells and their microenvironment as soon as progenitor cells are empowered to build and shape it, and, in turn, are informed by it to respond by attaining a stable differentiated phenotype if so induced. This work sheds new light on the utility of MMC to tune the microenvironment to augment the generation of adipose tissue from differentiating human MSCs.

In cartilage tissue engineering from mesenchymal stem cells, it is important to suppress hypertrophy to produce a neocartilage with stable phenotypes of hyaline articular cartilage (AC). The aim of this study was to develop and test the usefulness of functional chondrogenic scaffolds that serve the purpose of hypertrophy suppression. PD98059-impregnated poly(lactic-co-glycolic acid) (PLGA) scaffold is fabricated and compared with transforming growth factor (TGF)-β₂-immobilized scaffold. The PD98059 is continuously released from the scaffolds over 140 days in contrast to the rapid release in TGF-β₂-immobilized scaffold. The in vitro culture results show that the PD98059-impregated scaffold is more effective in suppressing hypertrophy than the TGF-β₂-immobilized scaffold while both scaffolds enhance chondrogenesis from human mesenchymal stem cells. After 10 weeks of in vivo implantation in rabbits, the osteochondral defects is successfully repaired in both PD98059-impregnated and TGF-β₂-immobilized scaffold seeded with rabbit mesenchymal stem cells when evaluated grossly and microscopically. However, type X collagen is not observed from regenerated cartilage in PD98059-impregnated scaffold, whereas it is detected around chondrocytes in the TGF-β₂-impregnated scaffolds. In addition, the PD98059-impregnated scaffold has better reconstitution of the subchondral plate. These results suggest that the use of the PD98059-impregnated scaffold leads to AC regeneration of better quality and prevents hypertrophy when implanted in the osteochondral defects.

Understanding interactions among the three elements (cells, scaffolds, and bioactive factors) is critical for successful tissue engineering. This study was aimed to investigate how scaffolds would affect osteogenic gene expression in human adipose tissue-derived stem cells (ASCs) or human primary osteoblasts (HOBs), and their cross talk. Either ASCs or HOBs were seeded on Baghdadite (Ca₃ZrSi₂O₉) and hydroxyapatite/tricalcium phosphate (HA/TCP) scaffolds, and osteogenic gene expression was assessed. To further evaluate how substrate affected HOB and ASC cross talk, an indirect co-culture system with semipermeable inserts placed on the culture plate was set up to co-culture ASCs or HOBs, which were grown in monolayer or seeded on Baghdadite or HA/TCP scaffolds, and osteogenic differentiation of the cells was assessed. We found that Baghdadite scaffolds induced a significantly greater increase in RUNX2, osteopontin, bone sialoprotein, and osteocalcin gene expression in HOBs in comparison to HA/TCP scaffolds; Baghdadite scaffolds also significantly induced RUNX2 and osteopontin, but not bone sialoprotein and osteocalcin gene expression in ASCs. In the co-culture system, the HOBs on Baghdadite scaffolds more markedly promoted osteogenic gene expression in ASCs compared to HOBs in monolayer or the HOBs on HA/TCP scaffolds. In addition, the ASCs seeded on Baghdadite scaffolds more markedly promoted osteogenic gene expression in HOBs than did the ASCs on HA/TCP scaffolds. BMP-2 expression in ASCs or HOBs was increased when they were seeded on Baghdadite scaffolds, and adding Noggin into the co-culture medium largely abrogated Baghdadite scaffold-modulated ASC–HOB cross talk. In summary, Baghdadite scaffolds not only promote the osteogenic differentiation of HOBs or ASCs but also modulate the cross talk between ASCs and HOBs, in part via increasing BMP2 expression, thereby promoting their osteogenic differentiation.

External ear reconstruction with autologous cartilage still remains one of the most difficult problems in the fields of plastic and reconstructive surgery. As the absence of tissue vascularization limits the ability to stimulate new tissue growth, relatively few surgical approaches are currently available (alloplastic implants or sculpted autologous cartilage grafts) to repair or reconstruct the auricle (or pinna) as a result of traumatic loss or congenital absence (e.g., microtia). Alternatively, tissue engineering can offer the potential to grow autogenous cartilage suitable for implantation. While tissue-engineered auricle cartilage constructs can be created, a substantial number of cells are required to generate sufficient quantities of tissue for reconstruction. Similarly, as routine cell expansion can elicit negative effects on chondrocyte function, we have developed an approach to generate large-sized engineered auricle constructs (≥3 cm²) directly from a small population of donor cells (20,000–40,000 cells/construct). Using rabbit donor cells, the developed bioreactor-cultivated constructs adopted structural-like characteristics similar to native auricular cartilage, including the development of distinct cartilaginous and perichondrium-like regions. Both alterations in media composition and seeding density had profound effects on the formation of engineered elastic tissue constructs in terms of cellularity, extracellular matrix accumulation, and tissue structure. Higher seeding densities and media containing sodium bicarbonate produced tissue constructs that were closer to the native tissue in terms of structure and composition. Future studies will be aimed at improving the accumulation of specific tissue constituents and determining the clinical effectiveness of this approach using a reconstructive animal model.

Spinal cord injury (SCI) results in loss of sensory and motor function below the level of injury and has limited available therapies. The host response to SCI is typified by limited endogenous repair, and biomaterial bridges offer the potential to alter the microenvironment to promote regeneration. Porous multiple channel bridges implanted into the injury provide stability to limit secondary damage and support cell infiltration that limits cavity formation. At the same time, the channels provide a path that physically directs axon growth across the injury. Using a rat spinal cord hemisection injury model, we investigated the dynamics of axon growth, myelination, and scar formation within and around the bridge in vivo for 6 months, at which time the bridge has fully degraded. Axons grew into and through the channels, and the density increased overtime, resulting in the greatest axon density at 6 months postimplantation, despite complete degradation of the bridge by that time point. Furthermore, the persistence of these axons contrasts with reports of axonal dieback in other models and is consistent with axon stability resulting from some degree of connectivity. Immunostaining of axons revealed both motor and sensory origins of the axons found in the channels of the bridge. Extensive myelination was observed throughout the bridge at 6 months, with centrally located and peripheral channels seemingly myelinated by oligodendrocytes and Schwann cells, respectively. Chondroitin sulfate proteoglycan deposition was restricted to the edges of the bridge, was greatest at 1 week, and significantly decreased by 6 weeks. The dynamics of collagen I and IV, laminin, and fibronectin deposition varied with time. These studies demonstrate that the bridge structure can support substantial long-term axon growth and myelination with limited scar formation.

Nerve conduits (NCs) with multiple longitudinally aligned channels, being mimicking the natural nerves anatomical structure, have been attracted more and more attentions. However, some specific structural parameters of a conduit that would be beneficial for further improvement of neural tissue regeneration were not comprehensively considered. Using a systematized device and combining low-pressure injection molding and thermal-induced phase separation, we fabricated 33-channel NCs (outer diameter 3.5 mm, channel diameter 200 μm) with different well-defined microscopic features, including NCs with a nano-fibrous microstructure (NNC), NCs with microspherical pores and nano-fibrous pore walls (MNC), and NCs with a ladder-like microstructure (LNC). The porosities of these NCs were ∼90% and were independent of the fine microstructures, whereas the pore size distributions were clearly distinct. The adsorption of bovine serum albumin for the NNC was a result of having the highest specific surface area, which was 3.5 times that of the LNC. But the mechanical strength of NNC was lower than that of two groups because of a relative high crystallinity and brittle characteristics. In vitro nerve stem cells (NSCs) incubation revealed that 14 days after seeding the NSCs, 31.32% cells were Map2 positive in the NNC group, as opposed to 15.76% in the LNC group and 23.29% in the MNC group. Addition of NGF into the culture medium, being distinctive specific surface area and a high adsorption of proteon for NNC, 81.11% of neurons derived from the differentiation of the seeded NSCs was obtained. As a result of imitating the physical structure of the basement membrane of the neural matrix, the nanofibrous structure of the NCs has facilitated the differentiation of NSCs into neurons.

Vascular tissue engineering relies on the combination of patient-derived cells and biomaterials to create new vessels. For clinical application, data regarding the function and behavior of patient-derived cells are needed. We investigated cell growth and functional characteristics of human venous endothelial cells (HVECs) from coronary arterial bypass graft (CABG), chronic kidney disease (CKD), and control patients. HVECs were isolated from venous specimens that were obtained during elective surgical procedures by means of collagenase digestion. Gene expression, proliferation, migration, secretory functions, and thrombogenic characteristics were evaluated using high-throughput assays. A total of 48 cell batches (14 control, 19 CABG, and 15 CKD subjects) were assessed. Proliferation, population doubling times, and migration of HVECs derived from CABG and CKD patients did not differ from controls. Thrombomodulin expression was higher in CABG-HVECs compared with controls. HVEC-induced thrombin formation in plasma did not differ between groups, and the contact activation pathway was the major contributor to coagulation. Patient-derived HVECs were able to attach and survive on polycaprolactone scaffolds that were coated with fibrin. HVECs from cardiovascular-diseased and CKD patients showed comparable functional characteristics with HVECs derived from uncompromised patients. We, therefore, conclude that endothelial cells from aged patients with comorbidities can be safely used for isolation and in vitro expansion for vascular tissue engineering.

The objective of this study was to design a biomimetic and bioactive tissue-engineered bone construct via a cold atmospheric plasma (CAP) treatment for directed osteogenic differentiation of human bone morrow mesenchymal stem cells (MSCs). Porous nanocrystalline hydroxyapatite/chitosan scaffolds were fabricated via a lyophilization procedure. The nanostructured bone scaffolds were then treated with CAP to create a more favorable surface for cell attachment, proliferation, and differentiation. The CAP-modified scaffolds were characterized via scanning electron microscope, Raman spectrometer, contact angle analyzer, and white light interferometer. In addition, optimal CAP treatment conditions were determined. Our in vitro study shows that MSC adhesion and infiltration were significantly enhanced on CAP modified scaffolds. More importantly, it was demonstrated that CAP-modified nanostructured bone constructs can greatly promote total protein, collagen synthesis, and calcium deposition after 3 weeks of culture, thus making them a promising implantable scaffold for bone regeneration. Moreover, the fibronectin and vitronection adsorption experiments by enzyme-linked immunosorbent assay demonstrated that more adhesion-mediated protein adsorption on the CAP-treated scaffolds. Since the initial specific protein absorption on scaffold surfaces can lead to further recruitment as well as activation of favorable cell functions, it is suggested that our enhanced stem cell growth and osteogenic function may be related to more protein adsorption resulting from surface roughness and wettability modification. The CAP modification method used in this study provides a quick one-step process for cell-favorable tissue-engineered scaffold architecture remodeling and surface property alteration.

Hematopoietic stem cells (HSCs) are continuously stimulated by physical interactions with bone marrow or umbilical cord niches as well as by chemical factors found within these niches. The niche can be mimicked by modification of the cytokine composition, elasticity, topography, and/or charge. This work employed cell culture plates coated with several concentrations of poly-L-lysine (PLL), a positively charged synthetic amino-acid chain. Culture substrates that employed relatively high initial coating concentrations of PLL significantly increased the total number of HSCs during ex vivo expansion of CD34⁺ cells, as well as erythroid differentiation. Furthermore, the 0.01% PLL substrate stimulated enucleation of erythroid cells, leaving behind a number of extruded nuclei at the bottom of the culture plate, followed by an increase in the number of erythrocytes. Thus, PLL will likely prove useful to enhance the expansion of HSCs and erythroid cells, in addition to the generation of red blood cells.

In primary human bone marrow cultures, the initial adherent cell fraction has been shown to provide a microenvironment for self-renewal of primitive non-adherent mesenchymal progenitors (non-adherent progenitors of bone marrow stroma [BM-NAMP]), with increased differentiation potential compared to adherent colony-forming units-fibroblast (CFU-f). The present study investigates whether NAMP exist also in cultures of stromal vascular fraction (SVF) cells derived from human adipose tissue. Adipose-tissue NAMP (AT-NAMP) were shown to be stably non-adherent and their number correlated with the number of the initial adhering CFU-f. Unlike BM-NAMP, AT-NAMP did not propagate in suspension in serial replating experiments and the number of colonies steadily decreased with each replating step. However, when AT-NAMP were kept on the initially adhering SVF cells, they could significantly expand without loss of clonogenic, proliferation, and differentiation potential. Although AT-NAMP progeny differentiated into mesodermal lineages similar to that of adherent CFU-f, it was enriched in early mesenchymal progenitor populations, characterized by increased expression of SSEA-4 and CD146. Furthermore, FGF-2 supported AT-NAMP survival and could not be replaced by another mitogenic factor, such as platelet derived growth factor BB. In conclusion, these data suggest that the SVF adherent fraction provides niche signals that regulate the expansion of adipose non-adherent mesenchymal progenitors with the maintenance of their potency. The biological differences described between BM- and AT-NAMP further qualify the properties of the stroma from different tissues and will be relevant for the selection of a cell source for specific regeneration strategies.

Modeling of cellular environments with nanofabricated biomaterial scaffolds has the potential to improve the growth and functional development of cultured cellular models, as well as assist in tissue engineering efforts. An understanding of how such substrates may alter cellular function is critical. Highly plastic central nervous system hippocampal cells and non-network forming peripheral nervous system dorsal root ganglion (DRG) cells from embryonic rats were cultured upon laminin-coated degradable polycaprolactone (PCL) and nondegradable polystyrene (PS) electrospun nanofibrous scaffolds with fiber diameters similar to those of neuronal processes. The two cell types displayed intrinsically different growth patterns on the nanofibrous scaffolds. Hippocampal neurites grew both parallel and perpendicular to the nanofibers, a property that would increase neurite-to-neurite contacts and maximize potential synapse development, essential for extensive network formation in a highly plastic cell type. In contrast, non-network-forming DRG neurons grew neurites exclusively along fibers, recapitulating the simple direct unbranching pathway between sensory ending and synapse in the spinal cord that occurs in vivo. In addition, the two primary neuronal types showed different functional capacities under patch clamp testing. The substrate composition did not alter the neuronal functional development, supporting electrospun PCL and PS as candidate materials for controlled cellular environments in culture and electrospun PCL for directed neurite outgrowth in tissue engineering applications.

A novel biodegradable copolymer, poly(propylene fumarate-co-caprolactone) [P(PF-co-CL)], has been developed in our laboratory as an injectable scaffold for bone defect repair. In the current study, we evaluated the ability of P(PF-co-CL) to reconstitute the load-bearing capacity of vertebral bodies with lytic lesions. Forty vertebral bodies from four fresh-frozen cadaveric thoracolumbar spines were used for this study. They were randomly divided into four groups: intact vertebral body (intact control), simulated defect without treatment (negative control), defect treated with P(PF-co-CL) (copolymer group), and defect treated with poly(methyl methacrylate) (PMMA group). Simulated metastatic lytic defects were made by removing a central core of the trabecular bone in each vertebral body with an approximate volume of 25% through an access hole in the side of the vertebrae. Defects were then filled by injecting either P(PF-co-CL) or PMMA in situ crosslinkable formulations. After the spines were imaged with quantitative computerized tomography, single vertebral body segments were harvested for mechanical testing. Specimens were compressed until failure or to 25% reduction in body height and ultimate strength and elastic modulus of each specimen were then calculated from the force–displacement data. The average failure strength of the copolymer group was 1.83 times stronger than the untreated negative group and it closely matched the intact vertebral bodies (intact control). The PMMA-treated vertebrae, however, had a failure strength 1.64 times larger compared with the intact control. The elastic modulus followed the same trend. This modulus mismatch between PMMA-treated vertebrae and the host vertebrae could potentially induce a fracture cascade and degenerative changes in adjacent intervertebral discs. In contrast, P(PF-co-CL) restored the mechanical properties of the treated segments similar to the normal, intact, vertebrae. Therefore, P(PF-co-CL) may be a suitable alternative to PMMA for vertebroplasty treatment of vertebral bodies with lytic defects.

Template polymerization of a high internal phase emulsion (polyHIPE) is a relatively new method to produce tunable high-porosity scaffolds for tissue regeneration. This study focuses on the development of biodegradable injectable polyHIPEs with interconnected porosity that have the potential to fill bone defects and enhance healing. Our laboratory previously fabricated biodegradable polyHIPEs that cure in situ upon injection; however, these scaffolds possessed a closed-pore morphology, which could limit bone ingrowth. To address this issue, HIPEs were fabricated with a radical initiator dissolved in the organic phase rather than the aqueous phase of the emulsion. Organic-phase initiation resulted in macromer densification forces that facilitated pore opening during cure. Compressive modulus and strength of the polyHIPEs were found to increase over 2 weeks to 43±12 MPa and 3±0.2 MPa, respectively, properties comparable to cancellous bone. The viscosity of the HIPE before cure (11.0±2.3 Pa·s) allowed for injection and filling of the bone defect, retention at the defect site during cure under water, and microscale integration of the graft with the bone. Precuring the materials before injection allowed for tuning of the work and set times. Furthermore, storage of the HIPEs before cure for 1 week at 4°C had a negligible effect on pore architecture after injection and cure. These findings indicate the potential of these emulsions to be stored at reduced temperatures and thawed in the surgical suite before injection. Overall, this work highlights the potential of interconnected propylene fumarate dimethacrylate polyHIPEs as injectable scaffolds for bone tissue engineering.

This study (i) developed a scaffold made of collagen I designed for hosting the autologous chondrocytes, (ii) focused on the optimization of chondrocytes seeding by the addition of the fibrin glue, and (iii) investigated the culture time for the ideal scaffold maturation in vitro. In the first part of the study, fresh chondrocytes were isolated from infant swine articular cartilage, and immediately seeded onto the collagen sponges either in medium or in fibrinogen in order to show the contribute of fibrin glue in cell seeding and survival into the scaffold. In the second part of the study, chondrocytes were first expanded in vitro and then resuspended in fibrinogen, seeded in collagen sponges, and cultured for 1, 3, and 5 weeks in order to identify the optimal time for the rescue of cell phenotype and for the scaffold maturation into a tissue with chondral properties. The histological and immunohistochemical data from the first part of the study (study with primary chondrocytes) demonstrated that the presence of fibrin glue ameliorated cell distribution and survival into the chondral composites. The second part of this work (study with dedifferentiated chondrocytes) showed that the prolongation of the culture to 3 weeks promoted a significant restoration of the cell phenotype, resulting in a composite with proper morphological features, biochemical composition, and mechanical integrity. In conclusion, this study developed a collagenic-fibrin glue scaffold that was able to support chondrocyte survival and synthetic activity in a static culture; in particular, this model was able to turn the engineered samples into a tissue with chondral-like properties when cultured in vitro for at least 3 weeks.