The focus of this work is to introduce the power distribution community to the effects distributed generation has on distribution systems. Specifically, changes in the voltage profiles and operation of voltage regulation are studied. A distribution system model equipped with Line Drop Compensation is developed and integrated into the PSCAD/EMTDC™ simulation environment. Distributed generation is added to the simulation environment to observe its effects on the traditional voltage regulation scheme. An algorithm from previous research that mitigates these effects is analysed and sample calculations are performed in MATLAB™ for validation.
KimJ. E.TetsuoH. K.NishikawaY., ‘Methods of determining introduction limits of Dispersed Generation systems in a distribution system’, Scripta Technica, Kyoto University, Japan, 1997.
2.
DuganR. C.McDermottT. E., ‘Operating conflicts for distributed generation on distribution systems’, in Proc. IEEE Rural Electric Power Conference 2001, pp. A3/1–A3/6.
3.
BarkerP. P.de MelloR. W., ‘Determining the impact of Distributed Generation on power systems: Part 1 – radial distribution systems’, in Proc. Power Engineering Society Summer Meeting, 2000, Vol. 3, pp. 1645–1656.
4.
PatchettG. N., Automatic Voltage Regulators and Stabilizers (Pitman, London, 1970).
5.
KimT. E.KimJ. E., ‘Voltage regulation coordination of Distributed Generation system in distribution system’, in Proc. IEEE Power Engineering Society Summer Meeting2001, Vol. 1, pp. 480–484.
6.
SalmanS. K.JiangF.RogersW. J. S., ‘Effects of wind power generators on the voltage control of utility distribution networks’, in Proc. IEEE Intl Conf. on Renewable Energy – Clean Power 2001, 1993, pp. 17–19.
7.
BompardE.CarpanetoE.ChiccoG.NapoliR., ‘Voltage control in radial systems with dispersed generation’, in Proc. Electric Power Engineering, 1999 (PowerTech Budapest 99), p. 32.
