VentolaCL. Medical applications for 3D printing: current and projected uses. P T, 2014; 39(10):704-711.
2.
GrossBC, ErkalJL, LockwoodSY, ChenC, SpenceDM. Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences. Anal Chem, 2014; 86(7):3240-3253.
3.
BanksJ. Adding value in additive manufacturing: researchers in the United Kingdom and Europe look to 3D printing for customization. IEEE Pulse, 2013; 4(6):22-26.
4.
SacknerMA. Bronchofiberscopy. Am Rev Respir Dis, 1975; 111(1):62-88.
5.
AgrawalA. Interventional pulmonology: diagnostic and therapeutic advances in bronchoscopy. Am J Ther, 2021; 28(2):e204-e216.
6.
OuelletteDR. The safety of bronchoscopy in a pulmonary fellowship program. Chest, 2006; 130(4):1185-1190.
7.
StatherDR, MaceachernP, CheeA, DumoulinE, TremblayA. Trainee impact on advanced diagnostic bronchoscopy: an analysis of 607 consecutive procedures in an interventional pulmonary practice. Respirology, 2013; 18(1):179-184.
PedersenTH, GysinJ, WegmannA, OsswaldM, OttSR, TheilerL, et al. A randomized controlled trial evaluating a low cost, 3D-printed bronchoscopy simulator. Anaesthesia, 2017; 72(8):1005-1009.
10.
MeyersL, MahoneyB, SchaffernockerT, WayD, WinfieldS, UribeA, et al. The effect of supplemental high-fidelity simulation training in medical students. BMC Med Educ, 2020; 20(1):421.
11.
JenkinsK, StroudJ, BhandaryS, LynemL, ChoiM, QuickJ, et al. High-fidelity anesthesia simulation in medical student education: three fundamental and effective teaching scenarios. Int J Acad Med, 2017; 3(1):66-71.
12.
NilssonPM, NaurTMH, ClementsenPF, KongeL. Simulation in bronchoscopy: current and future perspectives. Adv Health Sci Educ Theory Pract, 2017; 8:755-760.
13.
FarahaniN, BraunA, JuttD, HuffmanT, RederN, LiuZ, et al. Three-dimensional imaging and scanning: current and future applications for pathology. J Pathol Inform, 2017; 8:36.
14.
DorweilerB, BaquéPE, ChabanR, GhazyA, SalemO. Quality control in 3D printing: accuracy analysis of 3D-printed models of patient-specific anatomy. Materials (Basel), 2021; 14(4):1021.
15.
GarciaJ, YangZ, MongrainR, LeaskRL, LachapelleK. 3D printing materials and their use in medical education: a review of current technology and trends for the future. BMJ Simul Technol Enhanc Learn, 2018; 4(1):27-40.
