Determination of virtual source position using back projecting zero and convergent arcTAN method for scanning-passive scatter beam in carbon ion therapy

Abstract

OBJECTIVE:

This study aims to develop and test a new technique by using the convergent arcTAN (cATAN) method capable of dealing with the virtual source position delivered by different carbon ion energies from the pattern of scanning-passive scatter beam.

MATERIALS AND METHODS:

A homemade large-format CMOS sensor and Gaf Chromic EBT3 films are used for the virtual source position measurement. The Gaf films are embedded in a self-designed rectangular plastic frame to tighten films and set up on a treatment couch for irradiation in air with the film perpendicular to the carbon ion beam at the nominal source-axis-distance (SAD) as well as upstream and downstream from the SAD. The horizontal carbon ion beam with 5 energies at a machine opening field size is carried out in this study. The virtual source position is determined by using the convergent arcTAN (cATAN) method and compared with a linear regression by back projecting FWHM to zero at a distance upstream from the various source-film-distance.

RESULTS:

The film FWHM measurement error of 0.5 mm leads to 0.001% deviation of α (cATAN) at every assumed t_extend. The overall uncertainty for the reproducibility of calculated virtual source position by the assumed t_extend in the vertical and horizontal directions amounts to 0.1%. The errors of calculated virtual source position by assumed t_extend with back projecting FWHM to zero methods are within 1.1±0.001, p = 0.033.

CONCLUSION:

We develop a new technique capable of dealing with the virtual source position with a convergent arcTAN method to avoid any manual measurement mistakes in scanning-passive scatter carbon ion beam. The readers are encouraged to conduct the proposed cATAN method in this study to investigate the virtual source position in the Linac-based external electron beams and the proton beams.