The dispersion process of ceramic agglomerates modeled as solid particles with mass and drag coefficient in a micro-machined disperser is simulated with the cumulant lattice Boltzmann method (LBM). A simplified particle model is used for tracking the pathlines by compact quadratic interpolation. The simulation of the disperser is validated with experimental data. The simulation is found to be in quantitative agreement with both PIV measurements and flow rate measurements. Pathlines record the complete history of the strain rate each particle suffers during its passage. It is assumed that agglomerates break-up when they experience strain rates above a critical threshold. The obtained data for the maximum strain can be condensed into a simple exponential model with only two parameters that are determined by the simulation results. This condensed model is used to determine the probability that the particle experience a given threshold strain rate after a given number of passages through the disperser.
KobayashiM., Breakup and strength of polystyrene latex flocs subjected to a converging flow, Colloids and Surfaces A: Physicochemical and Engineering Aspects235(1-3) (2004), 73-78. URL http://www.sciencedirect.com/science/ article/pii/S0927775704000305.
2.
ByrneE.P., FitzpatrickJ.J., PampelL.W. and Titchener-HookerN.J., Influence of shear on particle size and fractal dimension of whey protein precipitates: implications for scale-up and centrifugal clarification efficiency, Chemical Engineering Science57(18) (2002), 3767-3779. URL http://yadda.icm.edu.pl/yadda/element/bwmeta1.element.elsevier-60a0ba99-0ee4-3d73-8ecb-0d860d2df0f6.
3.
ThorntonC., CiomocosM. and AdamsM., Numerical simulations of agglomerate impact breakage, Powder Technology105(1-3) (1999), 74-82. URL http://www.sciencedirect.com/science/article/pii/S0032591099001205.
4.
ShimizuK., MinekawaK., HiroseT. and KawaseY., Drop breakage in stirred tanks with Newtonian and non-Newtonian fluid systems, Chemical Engineering Journal72(2) (1999), 117-124. URL http://www.sciencedirect.com/science/article/ pii/S1385894798001508.
5.
BellD.J. and DunnillP., The influence of precipitation reactor configuration on the centrifugal recovery of isoelectric soya protein precipitate, Biotechnology and Bioengineering24(11) (1982), 2319-36. URL http://www.ncbi.nlm.nih. gov/pubmed/18546209.
6.
GregoriadesN., ClayJ., MaN., KoellingK. and ChalmersJ.J., Cell damage of microcarrier cultures as a function of local energy dissipation created by a rapid extensional flow, Biotechnology and Bioengineering69(2) (2000), 171-82. URL http://www.ncbi.nlm.nih.gov/pubmed/10861396.
7.
KaoS. and MasonS., Dispersion of particles by shear, Nature253 (1975), 619-621.
8.
ParkerD.S., KaufmanW.J. and JenkinsD., Floc Breakup in Turbulent Flocculation Processes, Journal of the Sanitary Engineering Division98(1) (1972), 79-99. URL http://cedb.asce.org/cgi/WWWdisplay.cgi?127407.
9.
YuanY. and FarnoodR.R., Strength and breakage of activated sludge flocs, Powder Technology199(2) (2010), 111-119. URL http://linkinghub.elsevier.com/retrieve/pii/S0032591009006214.
10.
SonntagR.C. and RusselW.B., Structure and breakup of flocs subjected to fluid stresses, Journal of Colloid and Interface Science115(2) (1987), 378-389. URL http://www.sciencedirect.com/science/article/pii/0021979787900531.
11.
BlaserS., Flocs in Shear and Strain Flows, Journal of Colloid and Interface Science225(2) (2000), 273-284. URL http:// www.ncbi.nlm.nih.gov/pubmed/11254264.
12.
HigashitaniK., IimuraK. and SandaH., Simulation of deformation and breakup of large aggregates in flows of viscous fluids, Chemical Engineering Science56(9) (2001), 2927-2938. URL http://www.sciencedirect.com/science/article/ pii/S0009250900004772.
13.
YeungA.K. and PeltonR., Micromechanics: A new approach to studying the strength and breakup of flocs, Journal of Colloid and Interface Science184(2) (1996), 579-585. URL http://www.sciencedirect.com/science/article/pii/ S0021979796906542.
14.
GibsonJ.H., HonH., FarnoodR., DroppoI.G. and SetoP., Effects of ultrasound on suspended particles in municipal wastewater, Water Research43(8) (2009), 2251-2259. URL http://www.sciencedirect.com/science/article/pii/ S0043135409001080.
15.
FernandesA.X., Computational fluid dynamics analysis for wastewater floc breakage in orifice flow by wastewater floc breakage in orifice flow, Ph.D. thesis (2012).
16.
HigashitaniK., InadaN. and OchiT., Floc breakup along centerline of contractile flow to orifice, Colloids and Surfaces56 (1991), 13-23. URL http://www.sciencedirect.com/science/article/pii/016666229180111Z.
17.
GibsonJ.H., DroppoI.G., FarnoodR., MahendranB., SetoP. and LissS.N., Hydrodynamic treatment of wastewater effluent flocs for improved disinfection, Water environment research: A research publication of the Water Environment Federation84(5) (2012), 387-95. URL http://www.ncbi.nlm.nih.gov/pubmed/22852423.
18.
NguyenT.Q. and KauschH.-H., Chain scission in transient extensional flow kinetics and molecular weight dependence, Journal of Non-Newtonian Fluid Mechanics30(2-3) (1988), 125-140. URL http://www.sciencedirect.com/science/article/pii/0377025788850201.
19.
ZumaetaN., ByrneE.P. and FitzpatrickJ.J., Breakage of protein precipitates flowing through orifices, Chemical Engineering Research and Design86(1) (2008), 107-117. URL http://linkinghub.elsevier.com/retrieve/pii/S02638762 07000214.
20.
GalinatS., Garrido TorresL., MasbernatO., GuiraudP., RissoF., DalmazzoneC. and NoikC., Breakup of a drop in a liquidliquid pipe flow through an orifice, AIChE Journal53(1) (2007), 56-68. URL http://doi.wiley.com/10.1002/aic.11055.
GeierM., SchönherrM., PasqualiA. and KrafczykM., The cumulant lattice Boltzmann equation in three dimensions: Theory and validation, Computers & Mathematics with Applications70(4) (2015), 507-547. URL http://www. sciencedirect.com/science/article/pii/S0898122115002126.
23.
LaddA.J.C., Numerical simulations of particulate suspensions via a discretized Boltzmann equation part I, theoretical foundation, Journal of Fluid Mechanics271 (1993), 1-36.
24.
GellerS., KrafczykM., TölkeJ., TurekS. and HronJ., Benchmark computations based on lattice-Boltzmann, finite element and finite volume methods for laminar flows, Computers & Fluids35(8-9) (2006), 888-897. URL http://www. sciencedirect.com/science/article/pii/S0045793005001519.
25.
LeeT. and LinC.-L., A stable discretization of the lattice Boltzmann equation for simulation of incompressible two-phase flows at high density ratio, Journal of Computational Physics206(1) (2005), 16-47. URL http://www.sciencedirect. com/science/article/pii/S0021999104004929.
26.
KrafczykM., TölkeJ. and LuoL.-S., Large-Eddy simulations with a multiple-relaxtion-time LBE model, International Journal of Modern Physics B17(01n02) (2003), 33-9. URL http://www.worldscienti_c.com/doi/abs/10.1142/ S0217979203017059.
27.
SoosM., SefcikJ. and MorbidelliM., Investigation of aggregation, breakage and restructuring kinetics of colloidal dispersions in turbulent flows by population balance modeling and static light scattering, Chemical Engineering Science61 (2006), 2349-2363.
28.
EhrlL., SoosM. and MorbidelliM., Dependence of aggregate strength, structure, and light scattering properties on primary particle size under turbulent conditions in stirred tank, Langmuir: the ACS Journal of Surfaces and Colloids24(7) (2008), 3070-81. URL http://dx.doi.org/10.1021/la7032302.
29.
JarvisP., JeffersonB., GregoryJ. and ParsonsS.A., A review of floc strength and breakage, Water Research39(14) (2005), 3121-37. URL http://www.sciencedirect.com/science/article/pii/S0043135405002794.
30.
RichterC., KrahT. and BüttgenbachS., Novel 3D manufacturing method combining microelectrial discharge machining and electrochemical polishing, Microsystem Technologies18(7-8) (2012), 1109-1118. URL http://link. springer.com/10.1007/s00542-012-1452-x.
31.
BeinertS., GothschT. and KwadeA., Numerical Evaluation of Flow Fields and Stresses Acting on Agglomerates Dispersed in High-Pressure Microsystems, Chemical Engineering & Technology35(11) (2012), 1922-1930. URL http:// www.researchgate.net/publication/264301162_Numerical_Evaluation_of_Flow_Fields_and_Stresses_Acting_on_Agglomerates_Dispersed_in_High-Pressure_Microsystems.
32.
KriegerI.M., Rheology of monodisperse latices, Advances in Colloid and Interface Science3(2) (1972), 111-136. URL http://www.sciencedirect.com/science/article/pii/0001868672800010.
33.
PhillipsR.J., ArmstrongR.C., BrownR.A., GrahamA.L. and AbbottJ.R., A constitutive equation for concentrated suspensions that accounts for shearinduced particle migration, Physics of Fluids A: Fluid Dynamics4(1) (1992), 30-40. URL http://scitation.aip.org/content/aip/journal/pofa/4/1/10.1063/1.858498.
34.
KauzlaricD., GreinerA. and KorvinkJ.G., A non-local extension of the Phillips model for shear induced particle migration, Microsystem Technologies17(2) (2011), 265-272. URL http://link.springer.com/10.1007/s00542-011-1280-4.
35.
CroweC.T., SchwarzkopfJ.D., SommerfeldM. and TsujiY., Multiphase Flows with Droplets and Particles, 1997. URL https://books.google.de/books/about/Multiphase_Flows_with_Droplets_and_Parti.html?id=CioXotlGMiYC&pgis=1.
36.
KraumeM., Transportvorgänge in der Verfahrenstechnik: Grundlagen und apparative Umsetzungen [Kindle Edition], Springer Berlin Heidelberg; Auflage: 2, 2012. URL http://www.amazon.de/Transportvorg%C3%A4nge-Verfahrenstechnik-Grundlagen-apparative-Umsetzungen-ebook/dp/B00DEHQ8HU.
37.
AhlrichsP., DünwegB., Lattice-Boltzmann Simulation of Polymer-Solvent Systems, International Journal of Modern Physics C9(8) (1998), 1429-1438. URL http://www.researchgate.net/publication/260510379_Lattice-Boltzmann_ Simulation_of_Polymer-Solvent_Systems.
38.
SucciS., The Lattice Boltzmann Equation for Fluid Dynamics and Beyond, Vol. 222, 2001. URL http://linkinghub. elsevier.com/retrieve/pii/037015739290090M.
39.
GeierM., GreinerA. and KorvinkJ.G., Bubble functions for the lattice Boltzmann method and their application to grid refinement, The European Physical Journal Special Topics171(1) (2009), 173-179. URL http://www. springerlink.com/index/10.1140/epjst/e2009-01026-6.
40.
GellerS., UphoffS. and KrafczykM., Turbulent jet computations based on MRT and Cascaded Lattice Boltzmann models, Computers & Mathematics with Applications66(12) (2012), 1956-1966.
41.
BenziR., SucciS. and VergassolaM., The lattice Boltzmann equation: theory and applications, Physics Reports222(3) (1992), 145-197. URL http://www.sciencedirect.com/science/article/pii/037015739290090M.
42.
ChenS. and DoolenG.D., Lattice Boltzmann method for fluid flows, Annual Review of Fluid Mechanics30(1) (1998), 329-364. URL http://www.annualreviews.org/doi/abs/10.1146/annurev.flid.30.1.329.
43.
McNamaraG. and ZanettiG., Use of the Boltzmann equation to simulate lattice-gas automata, Physical Review Letters61(20) (1988), 2332-2335. URL http://www.scopus.com/inward/record.url?eid=2-s2.0-25744459324&partner ID=tZOtx3y1.
44.
InamuroT., OgataT., TajimaS. and KonishiN., A lattice Boltzmann method for incompressible two-phase flows with large density differences, Journal of Computational Physics198(2) (2004), 628-644. URL http://dl.acm.org/citation. cfm?id=1034973.1034985.
45.
WhiteA.T. and ChongC.K., Rotational invariance in the three-dimensional lattice Boltzmann method is dependent on the choice of lattice, Journal of Computational Physics230(16) (2011), 6367-6378. URL http://www.sciencedirect. com/science/article/pii/S0021999111002798.
46.
KangS.K. and HassanY.A., The effect of lattice models within the lattice Boltzmann method in the simulation of wallbounded turbulent flows, Journal of Computational Physics232(1) (2013), 100-117. URL http://www.sciencedirect. com/science/article/pii/S0021999112003968.
47.
GeierM.C., Ab initio derivation of the cascaded lattice boltzmann automaton, Ph.D. thesis (2006).
48.
GeierM., GreinerA. and KorvinkJ., Cascaded digital lattice Boltzmann automata for high Reynolds number flow, Physical Review E73(6) (2006), 066705. URL http://link.aps.org/doi/10.1103/PhysRevE.73.066705.
49.
Phi HungN., Numerical simulations of the lattice Boltzmann method for determination of hydrodynamic properties of fractal aggregates, Ph.D. thesis (2007).
50.
GmachowskiL., Calculation of the fractal dimension of aggregates, Colloids and Surfaces A: Physicochemical and Engineering Aspects211(2-3) (2002), 197-203. URL http://www.sciencedirect.com/science/article/pii/S092 7775702002789.
51.
BatchelorG.K., An Introduction to Fluid Dynamics, 2000. URL http://books.google.de/books/about/An_Introduction_to _Fluid_Dynamics.html?id=Rla7OihRvUgC&pgis=1.
52.
BinderC., FeichtingerC., SchmidH.-J., ThüreyN., PeukertW. and RüdeU., Simulation of the hydrodynamic drag of aggregated particles, Journal of Colloid and Interface Science301(1) (2006), 155-67. URL http://www.ncbi.nlm.nih. gov/pubmed/16781722.
53.
SüliE. and MayersD.F., An Introduction to Numerical Analysis, Cambridge University Press, 2003. URL http://books. google.com/books?id=hj9weaqJTbQC&pgis=1.
54.
CanutoC., HussainiM.Y., QuarteroniA. and ZangT.A., Spectral Methods: Evolution to Complex Geometries and Applications to Fluid Dynamics, Springer Science & Business Media, 2007. URL http://books.google.com/books?id= iDckv0W52cQC&pgis=1.
55.
KimA.S. and YuanR., Hydrodynamics of an ideal aggregate with quadratically increasing permeability, Journal of Colloid and Interface Science285(2) (2005), 627-33. URL http://www.ncbi.nlm.nih.gov/pubmed/15837480.
56.
SeguraR. and KählerC.J., High pressure microPIV mesurements in dispersion system and thermo-liquid crystal (TCL) thermography combined with astigmatism particle tracking velocimetry (APTV), miKroPART DFG research group for 856.
57.
GothschT., FinkeJ.H., BeinertS., LescheC., SchurJ., BüttgenbachS., Müller-GoymannC. and KwadeA., Effect of microchannel geometry on high-pressure dispersion and emulsification, Chemical Engineering & Technology34(3) (2011), 335-343. URL http://doi.wiley.com/10.1002/ceat.201000421.
