Electrodynamic actuators are used in hybrid switching systems where a very quick contact separation as well as operation repeatability and long-term reliability are required. The article presents selected results of thermal studies in the electrodynamic drive system. Study was carried out on the basis of the 3D electromagneto-thermal model implemented in the Ansys_Maxwell environment. The present model allows to determine the critical parameters related to the heating and to guarantee the correct and repeatable operation of the actuator.
SönkeR. and KnutG., Coupled actuator placement and controller design for electromagnetic heating by means of dynamic optimization, Decision and Control (CDC), 2016 IEEE 55th Conference on doi: 10.1109/CDC.2016.7799003.
2.
AhnH.-M., Optimal design of permament magnet actuator for vacuum circuit breakers using response surface methodology, International Journal of Applied Electromagnetics and Mechanics IJAEM (2015), ISSN 1383-5416.
3.
PengC.Evaluation of design variables in thompson coil based operating mechanisms for ultra-fast opening in hybrid AC and DC circuit breakers, in: The 30th IEEE Annual Applied Power Electronics Conference and Exposition, 2015.
4.
MeyerJ.-M. and RuferA., DC hybrid circuit breaker with ultra-fast con-tact opening and integrated gate-commutated thyristors (IGCTs), Power Delivery, IEEE Transactions on21(2) (2006).
5.
JankowskiP., Analytic-Numerical Approach in Modelling Electrodynamic Phenomena of Inductive Dynamic Drive, JCIE Taylor&Francis, 2016.
6.
JankowskiP. and WoloszynM., Suitability study of hybrid model of electrodynamic actuator, International Journal of Applied Electromagnetics and Mechanics IJAEM (2015), ISSN 1383-5416.
7.
HengW., Thermoanalysis of the permament magnet rotor of the microturbine generator, International Journal of Applied Electromagnetics and Mechanics IJAEM (2015), ISSN 1383-5416.
8.
WuY., Numerical and experimental study of electromagnetic-thermal coupling for electromagnetic shaker, International Journal of Applied Electromagnetics and Mechanics IJAEM (2015), ISSN 1383-5416.
9.
CarlstedtM.PorzigK.UhligR.ZecM.ZiolkowskiM. and BrauerH., Appication of Lorenz force eddy current testing and eddy current testing on moving nonmagnetic conductors, International Journal of Applied Electromagnetics and Mechanics45(1-4) , doi:10.3233/JAE-141872.
10.
BasuS. and SrivastavaK.D., Analysis of a fast acting circuit breaker mechanism Part II: Thermal and mechanical aspects, Transaction Power Apparatus and SystemsPAS-91(3) (1972), 1203–1211, doi:10.1109/TPAS.1972.293478.
11.
TickooS., Ansys for Desiners, CADCIM Technologies, 2009.
12.
LawrenceK.L., Structural & Thermal Analysis using the Ansys Workbench Release 13 Environment.
13.
JankowskiP. and WoloszynM., Comparison of properties of the new electro-mechanical model and circumferential model of the inductive-dynamic (accompanying paper), International Journal of Applied Electromagnetics and Mechanics IJAEM (2017), ISSN 1383-5416.
14.
MoaveniS., Finite Element Analysis Theory and Application with Ansys, 3rd edn, Prentice Hall, 2007.
15.
GnacińskiP., Thermal loss of life and load-carrying capacity of marine induction, Energy Conversion and Managment Energy78 (2014), 574–583, ISN 0196-8904 Elsevier 2014.
