In the paper the results of research on an ultra-fast actuator with high initial energy were presented. The purpose of this research is to determine the critical parameters of a copper coil and a double-layer disc based on magneto-thermal analysis. The determined parameters must ensure the expected dynamics of the moving disc while not exceeding the allowable coil and disc temperature.
RodakM. and BorkowskiP., Magnetic field analysis of the inductive dynamic drive, Electrical Review94(4) (2018), 47–50, doi:10.15199/48.2018.04.12.
2.
BorkowskiP., Ultra-fast, redundant and unpolarized DC energy extraction systems for the protection of superconducting magnet circuits, IEEE Transactions on Industrial Electronics69, doi:10.1109/TIE.2021.3126982.
3.
BartosikM.BorkowskiP. and WójcikF., Ultra-fast hybrid systems USH for protecting direct current circuits with high magnetic energy. Bulletin of the Polish Academy of Sciences “Technical Sciences”, Technical Sciences69(2) (2021), e136743, doi:10.24425/bpasts.2021.136743.
4.
NowakM., Compact and integrated high-power pulse generation and forming system, Energies15(1) (2022), 99, doi:10.3390/en15010099.
5.
JankowskiP., Analytic-numerical approach in modeling electrodynamic phenomena of inductive dynamic drive, Journal of the Chinese Institute of Engineers (JCIE)39(1) (2016), doi:10.1080/02533839.2015.1070688.
6.
PengC.HusainI. and HuangA., Evaluation of design variables in Thompson coil based operating mechanisms for ultra-fast opening in hybrid AC and DC circuit breakers, in: The 30th IEEE Annual Applied Power Electronics Conference and Exposition 2015, 2015.
7.
JankowskiP.MindykowskiJ. and WołoszynM., Effect of Power frequency on the stress state of disc actuator, International Journal of Applied Electromagnetics and Mechanics45 (2014), doi:10.3233/JAE-141888, IJAEM ISSN 1383-5416.
8.
JankowskiP. and WołoszynM., Comparison of properties of the new electro-mechanical model and circumferential model of the inductive-dynamic drive, International Journal of Applied Electromagnetics and Mechanics59 (2019), IJAEM, ISSN 1383-5416, doi:10.3233/JAE-171241.
9.
LebkowskiA., A way of neodymium-iron-boron magnets regeneration in surface-mounted PMSM used in electric vehicles, Bulletin of the Polish Academy of Sciences, Technical Sciences65(5) (2017), doi:10.1515/bpasts-2017-0081.
10.
LebkowskiA., Design, analysis of the location and materials of neodymium magnets on the torque and power of in-wheel external rotor PMSM for electric vehicles, Energies11 (2018), 2293, doi:10.3390/en11092293.
11.
JankowskiP. and WoloszynM., Suitability study of hybrid model of electrodynamic actuator, International Journal of Applied Electromagnetics and Mechanics (IJAEM)45 (2014), doi:10.3233/JAE-141889.
12.
AhnHyun-Mo, Optimal design of permament magnet actuator for vacuum circuit breakers using response surface methodology, International Journal of Applied Electromagnetics and Mechanics IJAEM45 (2014), ISSN 1383-5416.
13.
JankowskiP. and MindykowskiJ., Measurement of quantities characterizing the properties of an inductive dynamic drive, Electrical Review , ISSN 0033-2097 R 88 No 12a/2012.
14.
PuumalaV. and KettunenL., Electromagnetic design of ultrafast electromechanical switches, Power Delivery, IEEE Transactions on30(3) (2015), 1104–1109.
15.
JankowskiP. and WołoszynM., Study of the effect of adiabatic heating on the operation of the electrodynamic actuator, International Journal of Applied Electromagnetics and Mechanics IJAEM59 (2019), ISSN 1383-5416, doi:10.3233/JAE-171242.
16.
JankowskiP., Modelling of magnetoelastic phenomena in inductive dynamic drive, Journal of Electrical Engineering & Technology (JEET)12, doi:10.5370/JEET.2017.12.3.1073.
