This paper presents a magnetometric system with scalar sensors mounted on two independent platforms, which is used to detect sunken shipwrecks. Increasing the distance between the sensors allows for more precise measurement of the difference in the magnetic induction module than in the case of sensors mounted e.g. on the aeroplane’s wings. This type of system makes it possible to enlarge detection range of the sunken wrecks.
LeliakP., Identification and evaluation of magnetic field sources of magnetic airborne detector equipped aircraft, IRE Trans. Aerospace and Navigational Electronics8 (1961), 95–105.
2.
HardwickC.D., Important design considerations for inboard airborne magnetic gradiometers, Geophysics49(11) (1984), 2004–2018.
3.
HirotaM.FuruseT.EbanaK.KuboH.TsushimaK.InabaT.ShimaA.FujinumaM. and TojyoN., Magnetic detection of a surface ship by an airborne LTS SQUID MAD, IEEE Transactions on Applied Superconductivity11(1) (2001), 884–886.
4.
AllenG.MatthewsR. and WynnM., Mitigation of platform generated magnetic noise impressed on a magnetic sensor mounted in an autonomous underwater vehicle, in: OCEANS, 2001, MTS/IEEE Conference and Exhibition, Honolulu, MTS/IEEE Oceans, 2001, pp. 63–71.
5.
ClemT., Superconducting magnetic sensors operating from a moving platform, IEEE Transaction on Applied Superconductivity5(2) (1995), 2124–2128.
6.
WoloszynM., Analysis of aircraft magnetic interference, International Journal of Applied Electromagnetics and Mechanics39 (2012), 129–136.
7.
GavinH.P., The Levenberg-Marquardt method for nonlinear least squares curve-fitting problems, in: Deferment of Civil and Environmental Engineering, Duke University, 2017.
8.
BiddlecombeC.S. and RileyC.P., Improvements to finite element meshing for magnetic signature simulations, in: MARELEC Conference, Philadelphia, PA, USA, Bossone Research Enterprise Center, 2015.
9.
McfeeJ.E.DasY. and EllingsonR.O., Locating and identifying compact ferrous objects, IEEE Transactions on Geoscience and Remote Sensing28(2) (1990), 182–193.
