Sage Journals: Discover world-class research

Abstract

The objective of this paper is a proof of concept on the possibility to measure the same magnetic fields, by the principle of dilation invariance. According to this principle, dilation of the dimensional and electrical parameters of a probe and a plate with crack reproduces the same magnetic field (measured at every dilated point) which was produced by a probe and a plate with crack, without dilation. This implies that, in order to evaluate the performance of eddy current method in a specific industrial case study, one can carry out tests in a scaled model in the laboratory and then, extend the conclusions to the real situation by using dilation invariance principle. The experimental and simulation results show a good agreement of crack detection by using two eddy current probes of which one is the dilated version of the other.

Keywords

ECT eddy current testing nondestructive evaluation dilation invariance principle

Get full access to this article

View all access options for this article.

References

Venkatraman

and Raj

, ``Pratical Eddy Current Testing'' in Alpha Science, B.P.C Rao, 2007.

Martins

M.V.M.

and Carneval

R.O.

, Detecção e avaliação de danos em colunas de fornos de reforma por END - Técnicas de Correntes Parasitas, [Relatório] - Rio de Janeiro, 1996.

Shi

and Lippold

J.C.

, Microstructure evolution during service exposure of two cast, heat-resisting stainless steels HP-Nb modified and 20-32Nb: Materials Characterization, Elsevier, No 59, 2008, pp. 1029-1040.

Martin

, Rugar

and Wickramasinghe

H.K.

, Highresolution magnetic imaging of domains in TbFe by force microscopy, Applied Physics Letters 52(3) (1988), 244-246.

Boogard

, Detection of creep damage in reformer tubes, [Relatório] - Netherlands: Mechanical plant service - DMS Research Gleen, 1992.

Silveira

T.L.

and Le May

, Damage Assessment and Management in Reformer Furnaces, J. Pressure Vessel Technology 119(4) (2008), 423-427.

Staszczak

E.J.

and Rebello

J.M.A.

, Análise da Inspeção Ultra-sônica de Aço HK-40 Utilizados em Fornos de Plantas de Processamento de Petróleo, 3rd PANDT-Pan American Conference on NDT, 2003.

Ramos

H.G.

, Torres

, Ribeiro

A.L.

and Rebello

, NDT Inspections Exploiting Invariances on Scale Transformations, 41st Annual Review of Progress in Quantitative Nondestructive Evaluation, AIP Conf. Proc. Boise, 2014.

Dogaru

and Smith

S.T.

, Giant magnetoresistance-based eddy-current sensor, IEEE Transactions on Magnetics 37(5) (2001), 3831-3838.

10.

and Blodgett

, Application of a Giant Magnetoresistive (GMR) sensor for Characterization of Corrosion in a Laboratory Specimen, Review of Quantitative Nondestructive Evaluation 22 (2003), 844-851.

11.

Lopes Ribeiro

, Geirinhas Ramos

, Pasadas

D.J.

and Rocha

T.J.

, Eddy Current Mapping Inside a Plane Conductor with Flaws, 39th Annual Review of Progress in Quantitative Nondestructive Evaluation, AIP Conf. Proc. 1511, 2012, pp. 428-435.

Detection of cracks by eddy current testing based on dilation invariance principle

Abstract

Keywords

Get full access to this article

References