Simultaneous Monitoring of Curing Shrinkage and Degree of Cure of Thermosets by Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectroscopy

Abstract

We present a novel methodology to simultaneously monitor of the degree of cure and curing shrinkage of thermosetting formulations. This methodology is based on the observation of changes in the infrared absorption of reactive functional groups and the groups used as a standard reference for normalization. While the optical path length is exact and controlled in transmission infrared spectroscopy, in attenuated total reflection Fourier transform infrared (ATR FT-IR), the exact determination of volume changes requires the measurement of the refractive indices of the studied system throughout the curing process or at least an indirect parallel measurement of this property. The methodology presented here allows one to achieve quantitative measurements of the degree of cure and shrinkage for thermosets using in situ ATR FT-IR spectroscopy.

Keywords

Thermosets Epoxy Methacrylate Fourier transform infrared FT-IR Attenuated total reflection ATR Polymer Swelling Shrinkage

Get full access to this article

View all access options for this article.

References

Sadhir

R.K.

Luck

M.R.

, editors. Expanding Monomers: Synthesis, Characterization and Applications. Boca Raton, FL: CRC Press, 1992.

Gonzalez

Ramis

Salla

J.M.

Mantecon

Serra

. “Reduction of the Shrinkage of Thermosets by the Cationic Curing of Mixtures of Diglycidyl Ether of Bisphenol A and 6,6-Dimethyl-(4,8-dioxaspiro[2.5]octane-5,7-dione)”. J. Polym. Sci., Part A: Polym. Chem. 2006. 44(23): 6869–6879.

Potter

Wisnom

M.R.

Stringer

. “In-Situ Measurement of Chemical Shrinkage of MY750 Epoxy Resin by a Novel Gravimetric Method”. Compos. Sci. Technol. 2004. 64(1): 55–64.

Morikawa

Sudo

Nishida

Endo

. “Volume-Expandable Monomer 5,5-Dimethyl-1,3-dioxolan-2-one: Its Copolymerization Behavior with Epoxide and its Applications to Shrinkage-Controlled Epoxy-Curing Systems”. J. Appl. Polym. Sci. 2005. 96(2): 372–378.

Dewaele

Truffier-Boutry

Devaux

Leloup

G.T.

. “Volume Contraction in Photocured Dental Resins: The Shrinkage-Conversion Relationship Revisited”. Dent. Mater. 2006. 22(4): 359–365.

Shah

D.U.

Schubel

P. J.

. “Evaluation of Cure Shrinkage Measurement Techniques for Thermosetting Resins”. Polym. Test. 29(6): 629–639.

Jose

Joseph

Pionteck

Thomas

. “PVT Behavior of Thermoplastic Poly(styrene-co-acrylonitrile)-Modified Epoxy Systems: Relating Polymerization-Induced Viscoelastic Phase Separation with the Cure Shrinkage Performance”. J. Phys. Chem. B. 2008. 112(47): 14793–14803.

Holst

Schanzlin

Wenzel

Lellinger

Alig

. “Time-Resolved Method for the Measurement of Volume Changes During Polymerization”. J. Polym. Sci., Part B: Polym. Phys. 2005. 43(17): 2314–2325.

Khoun

Hubert

. “Cure Shrinkage Characterization of an Epoxy Resin System by Two In Situ Measurement Methods”. Polym. Compos. 31(9): 1603–1610.

10.

Parlevliet

P.P.

Bersee

H.E.N.

Beukers

. “Shrinkage Determination of a Reactive Polymer with Volumetric Dilatometry”. Polym. Test. 29(4): 433–439.

11.

Watts

D.C.

Marouf

A.S.

Al-Hindi

A.M.

. “Photo-Polymerization Shrinkage-Stress Kinetics in Resin-Composites: Methods Development”. Dent. Mater. 2003. 19(1): 1–11.

12.

Amirouche-Korichi

Mouzali

Watts

D.C.

. “Effects of Monomer Ratios and Highly Radiopaque Fillers on Degree of Conversion and Shrinkage-Strain of Dental Resin Composites”. Dent. Mater. 2009. 25(11): 1411–1418.

13.

Atai

Ahmadi

Babanzadeh

Watts

D.C.

. “Synthesis, Characterization, Shrinkage and Curing Kinetics of a New Low-Shrinkage Urethane Dimethacrylate Monomer for Dental Applications”. Dent. Mater. 2007. 23(8): 1030–1041.

14.

Lange

Toll

Manson

J.A.E.

Hult

. “Residual Stress Build-Up in Thermoset Films Cured Above Their Ultimate Glass Transition Temperature”. Polymer. 1995. 36(16): 3135–3141.

15.

Nawab

Tardif

Boyard

Sobotka

Casari

Jacquemin

. “Determination and Modelling of the Cure Shrinkage of Epoxy Vinylester Resin and Associated Composites by Considering Thermal Gradients”. Compos. Sci. Technol. 2012. 73: 81–87.

16.

Mas

Ramis

Salla

J.M.

Mantecon

Serra

. “Copolymerization of Diglycidyl Ether of Bisphenol A with γ-Butyrolactone Catalyzed by Ytterbium Triflate: Shrinkage During Curing”. J. Polym. Sci., Part A: Polym. Chem. 2003. 41(18): 2794–2808.

17.

Fernàndez

Salla

J.M.

Serra

Mantecón

Ramis

. “Cationic Copolymerization of Cycloaliphatic Epoxy Resin with a Spirobislactone with Lanthanum Triflate as Initiator: I. Characterization and Shrinkage”. J. Polym. Sci., Part A: Polym. Chem. 2005. 43(15): 3421–3432.

18.

Gimenez

Fernandez-Francos

Salla

J.M.

Serra

Mantecon

Ramis

. “New Degradable Thermosets Obtained by Cationic Copolymerization of DGEBA with an s(γ-Butyrolactone)”. Polymer. 2005. 46(24): 10637–10647.

19.

Morell

Ramis

Ferrando

Serra

. “New Improved Thermosets Obtained from DGEBA and a Hyperbranched Poly(esteramide)”. Polymer. 2009. 50(23): 5374–5383.

20.

Nunes

T.G.

Pereira

S.G.

Kalachandra

. “Effect of Treated Filler Loading on the Photopolymerization Inhibition and Shrinkage of a Dimethacrylate Matrix”. J. Mater. Sci.: Mater. Med. 2008. 19(5): 1881–1889.

21.

Pereira

S.G.

Nunes

T.G.

Kalachandra

. “Low Viscosity Dimethacrylate Comonomer Compositions [Bis-GMA and CH3Bis-GMA] for Novel Dental Composites; Analysis of the Network by Stray-Field MRI, Solid-State NMR and DSC FTIR”. Biomaterials. 2002. 23(18): 3799–3806.

22.

Hoa

S.V.

Ouellette

Ngo

T.D.

. “Determination of Shrinkage and Modulus Development of Thermosetting Resins”. J. Compos. Mater. 2009. 43(7): 783–803.

23.

Scherzer

. “Real-Time FTIR-ATR Spectroscopy of Photopolymerization Reactions”. Macromol. Symp. 2002. 184(1): 79–98.

24.

Scherzer

. “Depth Profiling of the Degree of Cure During the Photopolymerization of Acrylates Studied by Real-Time FT-IR Attenuated Total Reflection Spectroscopy”. Appl. Spectrosc. 2002. 56(11): 1403–1412.

25.

Kim

Y.-M.

Kostanski

L.K.

MacGregor

J. F.

. “Photopolymerization of 3,4-Epoxycyclohexylmethyl-3′,4′-Epoxycyclohexane Carboxylate and Tri (Ethylene Glycol) Methyl Vinyl Ether”. Polymer. 2003. 44(18): 5103–5109.

26.

Fernández-Francos

Rybak

Sekula

Ramis

Serra

. “Modification of Epoxy-Anhydride Thermosets Using a Hyperbranched Poly(ester-Amide). I. Kinetics Study”. Polym. Int. 2012. 61(12): 1710–1725.

27.

Flichy

N.M.B.

Kazarian

S.G.

Lawrence

C.J.

Briscoe

B. J.

. “An ATR-IR Study of Poly (Dimethylsiloxane) Under High-Pressure Carbon Dioxide: Simultaneous Measurement of Sorption and Swelling”. J. Phys. Chem. B. 2001. 106(4): 754–759.

28.

Harris

F.J.

. “On the Use of Windows for Harmonic Analysis with the Discrete Fourier Transform”. P. IEEE. 1978. 66(1): 51–83.

29.

Urban

M.W.

. Attenuated Total Reflectance Spectroscopy of Polymers. Washington, D.C.: American Chemical Society, 1996.

30.

Buggy

S.J.

Chehura

James

S.W.

Tatam

R.P.

. “Optical Fibre Grating Refractometers for Resin Cure Monitoring”. J. Opt. A: Pure Appl. Opt. 2007. 9(6): S60–S65.

31.

Crosby

P.A.

Powell

G.R.

Fernando

G.F.

France

C.M.

Spooncer

R.C.

Waters

D.N.

. “In Situ Cure Monitoring of Epoxy Resins Using Optical Fibre Sensors”. Smart Mater. Struct. 1996. 5(4): 415–428.

32.

Dimopoulos

Buggy

S.J.

Skordos

A.A.

James

S.W.

Tatam

R.P.

Partridge

K.I.

. “Monitoring Cure in Epoxies Containing Carbon Nanotubes with an Optical-Fiber Fresnel Refractometer”. J. Appl. Polym. Sci. 2009. 113(2): 730–735.

33.

Chailleux

Salvia

Jaffrezic-Renault

Matejec

Kasik

. “In Situ Study of the Epoxy Cure Process Using a Fibre-Optic Sensor”. Smart Mater. Struct. 2001. 10(2): 194–202.

34.

Hadis

M.A.

Tomlins

P.H.

Shortall

A.C.

Palin

W.M.

. “Dynamic Monitoring of Refractive Index Change Through Photoactive Resins”. Dent. Mater. 2010. 26(11): 1106–1112.

35.

Powell

G.R.

Crosby

P.A.

Waters

D.N.

France

C.M.

Spooncer

R.C.

Fernando

G.F.

. “In-Situ Cure Monitoring Using Optical Fibre Sensors—A Comparative Study”. Smart Mater. Struct. 1998. 7(4): 557–568.

36.

Cusano

Breglio

Giordano

Calabro

Cutolo

Nicolais

. “Optoelectronic Characterization of the Curing Process of Thermoset-Based Composites”. J. Opt. A: Pure Appl. Opt. 2001. 3(2): 126–130.

37.

Antonucci

Giordano

Cusano

Nasser

Nicolais

. “Real Time Monitoring of Cure and Gelification of a Thermoset Matrix”. Compos. Sci. Technol. 2006. 66(16): 3273–3280.

38.

Korniski

R.J.

Wolfe

W.L.

. “Infrared Refractometer Measurements of Adhesives”. Appl. Opt. 1978. 17(19): 3138–3142.

39.

Ruf

Cardona

Pickles

C.S.J.

Sussmann

. “Temperature Dependence of the Refractive Index of Diamond up to 925 K”. Phys. Rev. B. 2000. 62(24): 16578–16581.

40.

Podgórski

. “Synthesis and Characterization of Acetyloxypropylene Dimethacrylate as a New Dental Monomer”. Dent. Mater. 2011. 27(8): 748–754.

41.

Ooi

S.K.

Cook

W.D.

Simon

G.P.

Such

C.H.

. “DSC Studies of the Curing Mechanisms and Kinetics of DGEBA Using Imidazole Curing Agents”. Polymer. 2000. 41(10): 3639–3649.

42.

Heise

M.S.

Martin

G.C.

. “Curing Mechanism and Thermal Properties of Epoxy-Imidazole Systems”. Macromolecules. 1989. 22(1): 99–104.

43.

Heise

M.S.

Martin

G.C.

. “Analysis of the Cure Kinetics of Epoxy/Imidazole Resin Systems”. J. Appl. Polym. Sci. 1990. 39(3): 721–738.

44.

Barton

J.M.

Hamerton

Howlin

B.J.

Jones

J.R.

Liu

. “Studies of Cure Schedule and Final Property Relationships of a Commercial Epoxy Resin Using Modified Imidazole Curing Agents”. Polymer. 1998. 39(10): 1929–1937.

45.

Fernandez-Francos

Cook

W.D.

Serra

Ramis

Liang

G.G.

Salla

J.M.

. “Crosslinking of Mixtures of DGEBA with Bislactone Initiated by Tertiary Amines. IV. Effect of Hydroxyl Groups on Initiation and Curing Kinetics”. Polymer. 2010. 51(1): 26–34.

46.

Mauri

A.N.

Galego

Riccardi

C.C.

Williams

R.J.J.

. “Kinetic Model for Gelation in the Diepoxide-Cyclic Anhydride Copolymerization Initiated by Tertiary Amines”. Macromolecules. 1997. 30(6): 1616–1620.

47.

Dušek

Luňák

Matějka

. “Gelation in the Curing of Epoxy Resins with Anhydrides”. Polym. Bull. 1982. 7(2–3): 145–152.

48.

Rocks

Rintoul

Vohwinkel

George

. “The Kinetics and Mechanism of Cure of an Amino-Glycidyl Epoxy Resin by a Co-Anhydride as Studied by FT-Raman Spectroscopy”. Polymer. 2004. 45(20): 6799–6811.

49.

Decker

Nguyen

Viet

Thi

H.P.

. “Photoinitiated Cationic Polymerization of Epoxides”. Polym. Int. 2001. 50(9): 986–997.

50.

Crivello

J.V.

Varlemann

. “Structure and Reactivity Relationships in the Photoinitiated Cationic Polymerization of 3,4-Epoxycyclohexylmethyl-3′,4′-Epoxycyclohexane Carboxylate”. ACS Symposium Series. 1997. 673: 82–94.

51.

Sangermano

Priola

Malucelli

Bongiovanni

Quaglia

Voit

Ziemer

. “Phenolic Hyperbranched Polymers as Additives in Cationic Photopolymerization of Epoxy Systems”. Macromol. Mater. Eng. 2004. 289(5): 442–446.

52.

Tilbrook

D.A.

Clarke

R.L.

Howle

N.E.

Braden

. “Photocurable Epoxy-Polyol Matrices for Use in Dental Composites I”. Biomaterials. 2000. 21(17): 1743–1753.

53.

Sangermano

Ortiz

R.A.

Urbina

B.A.P.

Duarte

L.B.

Valdez

A.E.G.

Santos

R.G.

. “Synthesis of an Epoxy Functionalized Spiroorthocarbonate Used as Low Shrinkage Additive in Cationic UV Curing of an Epoxy Resin”. Eur. Polym. J. 2008. 44(4): 1046–1052.

54.

Kim

Y.-M.

Kostanski

L.K.

MacGregor

J.F.

. “Kinetic Studies of Cationic Photopolymerizations of Cycloaliphatic Epoxide, Triethyleneglycol Methyl Vinyl Ether, and Cyclohexene Oxide”. Polym. Eng. Sci. 2005. 45(11): 1546–1555.

55.

Duarte

A.R.C.

Anderson

L.E.

Duarte

C.M.M.

Kazarian

S.G.

. “A Comparison Between Gravimetric and In Situ Spectroscopic Methods to Measure the Sorption of CO₂ in a Biocompatible Polymer”. J. Supercrit. Fluids. 2005. 36(2): 160–165.

56.

Kazarian

S.G.

. “Polymers and Supercritical Fluids: Opportunities for Vibrational Spectroscopy”. Macromol. Symp. 2002. 184(1): 215–228.