Sage Journals: Discover world-class research

Abstract

The quantitative electron probe analysis on irregular surfaces via the two-voltage technique was assessed for light elements. This analysis can be performed without the knowledge of the local tilt angle, i.e., the take-off angle. Data are presented of compositions determined on crystal facets with widely varied orientations with respect to the detector. A range of model compounds and commercial products was investigated with special emphasis on those consisting of low-atomic-number elements. The usefulness of the technique, its disadvantages, and limitations are critically evaluated. The precision and accuracy obtainable in routine laboratory work are quantified and the effect of the selection of the accelerating voltage pairs and magnification is discussed.

Keywords

Electron microprobe

Get full access to this article

View all access options for this article.

References

Moll

Baumigarten

, and Donnelly

, “Geometrical considerations for ZAF corrections in the SEM,” in Proceedings of the Annual Microanalysis Conference, Boston, Mass., Aug. 18–24, 1977, p. 33.

Russ

J. C.

and Hare

T. M.

, Can. J. Spectrosc. 25, No. 4, 1980, pp. 98–105.

DeGroot

P. B.

, “Method of Z-A-F analysis in the SEM in cases in which the take-off angle is unknown,” in Proceedings of the 16th Annual Conference of the Microbeam Analysis Society, Vail, Colorado, July 13–17, 1981, pp. 195–198. (Editor: Geiss

Roy H.

, San Francisco Press, Inc.).

Seaman

and Solosky

, Anal. Chem. 567 (1973) Vol. 45.

Russ

J. C.

, “A fast, self-contained, no-standards quantitative program for EDS,” Proceedings of the 13th Annual Microanalysis Conference, of the Microbeam Analysis Society, Ann Arbor, Mich., 1978, p. 46 (San Francisco Press).

Wells

O. C.

, Scanning Electron Microscopy (McGraw/Hill, New York, 1974).

“Quantitative” Electron Probe Analysis of Low-Atomic-Number Samples with Irregular Surfaces

Abstract

Keywords

Get full access to this article

References