Applicability of Fiber-Optic-Based Raman Probes for On-Line Reaction Monitoring of High-Pressure Catalytic Hydrogenation Reactions

Abstract

This study evaluates the applicability of fiber-optic-based Raman probes for on-line reaction monitoring of high-pressure catalytic hydrogenation reactions in batch autoclaves. First, based on trends in the strong intensity of the 945 cm⁻¹ C–O–C vibration of 1,3-dioxolane, the effect of various experimental parameters on sensitivity was evaluated and can be summarized as follows: (1) above 500 rpm a linear increase in stirring speed induces a linear decrease in Raman intensity; (2) a linear increase in hydrogen pressure also leads to a linear decrease of the Raman signal; (3) linear temperature elevation exponentially decreases the Raman intensity; and (4) increasing the catalyst particle concentration results in a steep nonlinear decrease of the Raman signal. Light scattering by gas bubbles, or combined scattering and absorption by (black) catalyst particles, reducing the amount of light collected by the optical fiber probe, explain the observed experimental trends. Second, the sensitivity of Raman spectroscopy was directly compared with attenuated total reflection–Fourier transform infrared (ATR-FT-IR) spectroscopy in the analysis of three different hydrogenation reactions over a Cu–ZnO catalyst. From the applied target molecules, diethyl maleate hydrogenation could be very well analyzed by Raman spectroscopy due to the high Raman scattering efficiency of the C=C bond, while for analysis of the hydrogenation of γ-butyrolactone or 1-butanal, ATR-FT-IR is the technique of choice.