In this paper the results of an experimental investigation on full-scale reinforced masonry elements like vaults and walls are presented. The masonry type is constituted by calcarenite ashlars and bed joint mortar and the reinforcement is constituted by Carbon Fibre Reinforced Polymer (CFRP) strips. Preliminary experimental results obtained in a previous research by the authors on the local behaviour at the interface CFRP-calcarenite are summarized. Tests with controlled displacement are carried out on out-of-plane loaded walls and cylindrical vaults loaded at a quarter of the span. Results of tests carried out before and after the application of the reinforcement made it possible to evaluate the enhancement in the performance of the structural elements made of the masonry type considered in this study. Local measurements allowed interpretation of the cross-section behaviour, taking into account failure modes relating to the debonding phenomenon and the compression failure of the masonry material.
AccardiM. and La MendolaL. (2004). “Stress transfer at the interface of bonded joints between FRP and calcarenite natural stone”, Proceedings of the IV International Seminar of Structural Analysis of Historical Constructions, Italy, pp. 867–874.
2.
AccardiM.CucchiaraC. and La MendolaL. (2007a). “Bond behavior between CFRP strips and calcarenite stone”Proceedings of the 6th International Conference on fracture Mechanics of Concrete and concrete Structures, Italy, CarpinteriA.GambarovaP. G.FerroG. and PlizzariG. eds., Vol. 2, pp. 1203–1211.
3.
AccardiM.CucchiaraC.FaillaA. and La MendolaL. (2007b). “CFRP flexural strengthening of masonry walls: Experimental and analytical approach”, Proceedings of the 8th International Symposium of Civil Engineering, paper No. 347 CD-rom, Greece.
4.
AielloM.A. and ScioltiM.S. (2008). “Analysis of bond performance between FRP sheets and calcarenite stones under service and ultimate condition”, Journal of the British Masonry Society Masonry International, Vol. 21, No. 1, pp. 15–28.
5.
ACI Committee 440. (2000). Guidelines for the Design and Construction of Externally Bonded FRP System for Strengthening Concrete Structures, American Concrete Institute, Detroit, 2000.
6.
BatiBriccoli S. and RoveroL. (1999). “Consolidamento di archi in muratura con composito in fibre di carbonio”, Atti del II Convegno Materiali e Tecniche per il Restauro, Italy, (in italian) pp. 337–346.
7.
CavaleriL.FaillaA.La MendolaL. and PapiaM. (2005). “Experimental and analytical response of masonry elements under eccentric vertical loads”, Engineering Structures, Vol. 27, No. 8, pp. 1175–1184.
8.
CavaleriL.FossettiM.La MendolaL. and PapiaM. (2006). “Experimental and analytical out-of-plane behaviour of calcarenite masonry walls”, Proceedings of the 5th International Conference on Structural Analysis of Historical Construction, India, 2006.
9.
ChajesM.J.FinchW.W.JanuszkaT.F. and ThonsonT.A.Jr. (1996). “Bond and force transfer of composite material plates bonded to concrete”, ACI Structural Journal, Vol. 93, No. 2, pp. 208–217.
10.
ChenJ.F. (2002). “Load-bearing capacity of masonry arch bridges strengthened with fibre reinforced polymer composites”, Advances in Structural Engineering, Vol. 5, No. 1, pp. 37–44.
11.
ChenJ.F. and TengJ.G. (2001). “Anchorage strength models for FRP and steel plates bonded to concrete”, Journal of Structural Engineering ASCE, Vol. 127, No. 7, pp. 784–791.
12.
ChristensenJ.B.GilstrapJ. and DolanC. (1996). “Composites material reinforcement of existing masonry walls”, Journal of Architectural Engineering, ASCEVol. 2, No. 2, pp. 63–70.
13.
CNR-DT 200/2004. (2004). Istruzioni per la Progettazione, L'esecuzione ed il Controllo di Interventi di Consolidamento Statico Mediante L'utilizzo di Compositi Fibrorinforzati, Italy (in Italian).
14.
CucchiaraC.La MendolaL. and PapiaM, (2003) “Flexural bering capacity and related ductility demand for masonry sections affected by nonlinear costitutive law”, In. STREMAH 2003-Structural Studies, Repairs and Maintenance of Heritage Architecture VIII, BrebbiaC.A. ed., Greece, pp. 791–800.
15.
EshaniM.R.SaadatmaneshH. and Velazquez-DimasJ.L. (1999) “Behavior of retrofitted URM walls under simulated earthquake loading”, Journal of Composites for Construction, ASCE, Vol. 3, No. 3, pp. 134–142.
16.
FaillaA.CucchiaraC. and AccardiM., (2000). “Experimental investigation on the behaviour of cylindrical vaults in calcarenite ashlars and bed joint mortar”, Proceedings of the 12th International Brick Block masonry Conference, Spain, pp. 465–480.
17.
FaillaA.AccardiM.RizzoG.AlgozziniG.PellitteriG. and BuscagliaC. (2002). “The use of CFRPs in strengthening of historical masonry structures: Investigation on durability by accelerated testing”, Proceedings of the 2nd International Conference on Durability of Fiber Reinforced Polymer (FRP) Composites for Construction, Canadian, May, pp. 297–303.
18.
FaillaA.CottoneA. and GiambancoG. (2004). “Numerical modeling of masonry structures reinforced by FRP plate/sheets”, Proceedings of the IV International Seminar of Structural Analysis of Historical Constructions, Italy, pp.857–866.
19.
fib Bulletin. (2001). “Design and use of externally bonded FRP reinforcement for reinforced concrete structures”, Bulletinno. 14, sub-group EBR of fib Task Group 9.3.
20.
ForaboschiP. (2004). “Strengthening of masonry arches with fiber-reinforced polymer strips”, Journal of Composites for Construction, ASCE, Vol. 8, No. 3, pp. 191–202.
21.
GiambancoG.FaillaA. and CucchiaraC., (2000). “Numerical modeling of masonry arches via interface models”, Proceedings of the 12th International Brick Block masonry Conference, Spain, pp. 449–463.
22.
HeymannJ. (1982). The Masonry Arch, Ellis, Horwood, Ltd., New York.
23.
HolzenkämpferO. (1994). Ingenieurmodelle des Verbundes Geklebter Bewehrung für Betonbauteile, PhD Thesis, TU Braunschweig, Germany, (in German).
24.
JSCE Concrete Committee. (2001). Recommendations for Upgrading of Concrete Structures with use of Continuous Fiber Sheets, Japan, pp. 116–133.
25.
KolschH. (1998). “Carbon fiber cement matrix (CFCM) overlay system for masonry strengthening”, Journal of Composites for Constrution, ASCE, Vol. 2, No. 2, pp. 105–109.
26.
La MendolaL. and PapiaM. (2002). “General stress-strain model for concrete or masonry response under uniaxial cyclic compression”, Structural Engineering and Mechanics, Vol. 14, No. 4, pp. 435–454.
27.
LucianoR. and SaccoE. (1998). “Damage of masonry panels reinforced by FRP sheets”, International Journal Solids and Structures, Vol. 35, No. 15, pp. 1723–1741.
28.
SaadatmaneshH. (1994). “Fiber composites for new and existing structures”, ACI Structural Journal, Vol. 91No. 3, pp. 346–354.
29.
SchweglerG. (1994). Strengthening of Masonry with Fiber Composites, PhD Thesis, The Federal Institute of Technology, Zürich, Switzerland.
30.
TäljstenB. (1997). “Defining anchor lengths of steel and CFRP plates bonded to concrete”, International Journal of Adhesion and Adhesives, Vol. 17, No. 4, pp. 319–327.
31.
TriantafillouT.C. (1998a). “Strengthening of masonry structures using epoxy-bonded FRP laminates”, Journal of Composites for Construction, ASCE, Vol. 2No. 2, pp. 96–105.
32.
TriantafillouT.C. (1998b). “Strengthening of masonry structures using epoxy-bonded FRP laminates”, Errata, Journal of Composites for Construction, ASCE, Vol. 2, No. 4, pp. 203.
33.
TriantafillouT.C. and FardisM.N. (1997). “Strengthening of historic masonry structures with composite materials”, Materials and Structures, RILEM, Vol. 30, No. 202, pp. 486–496.
34.
ValluzziM.R.ValdemarcaM. and ModenaC. (2001). “Behaviour of brick masonry vaults strengthned by FRP laminates”, Journal of Composites for Construction, ASCE, Vol. 5, No. 3, pp. 163–169.
