Semi-Active Stiffness Dampers for Seismic Control of Structures

Abstract

This paper describes the application of semi-active variable stiffness damper (SAVSD) for response control of the seismically excited structure. The SAVSD consists of hydraulic damper connected in the form of bracing in a selected story of frame structure. The SAVSD changes its stiffness depending upon the structural response and accordingly adds the control forces in the structural system. In this paper, the comparative study and the performance of SAVSD under different ratios of damper stiffness to structural story stiffness is presented. The specific objective of this study is to evaluate the optimum value of damper stiffness ratio and its importance in structural response reduction. The optimum stiffness ratio is investigated for the structure subjected to four different types of earthquake ground motions. Here, the switching control law and newly proposed modified switching control law are used and the results are compared with uncontrolled and passive control cases. A numerical study is performed on five and ten-story shear building with different configurations of damper placement. The numerically evaluated optimum parametric values are considered for the analysis of the optimum damper placement in the structure. It is revealed that, the proposed modified switching control law is very effective in reducing the story displacements and inter-story drifts without increasing the top floor accelerations. The numerical results of various analyses indicate that SAVSD shows better performance over the passive dampers in reducing the structural responses.

Keywords

Structural control semi-active control variable stiffness damper control algorithms earthquake

Get full access to this article

View all access options for this article.

References

Agrawal

A.K.

Yang

J.N.

and He

W.L.

(2003). “Application of some semi-active control systems to benchmark cable-stayed bridge”, Journal of Structural Engineering, ASCE, Vol. 129, No. 7, pp. 884–894.

Djajakesukma

S.L.

Samali

and Nguyen

(2002). “Study of a semi-active stiffness damper under various earthquake inputs”, Earthquake Engineering and Structural Dynamics, Vol. 31, No. 10, pp. 1757–1776.

W.L.

Agrawal

A.K.

and Mahmoud

(2001). “Control of seismically excited cable-stayed bridge using resetting semi-active stiffness dampers”, Journal of Bridge Engineering, ASCE, Vol. 6, No. 6, pp. 376–384.

Kobori

Takahashi

Nasu

and Ogasawara

(1993). “Seismic response controlled structure with active variable stiffness system”, Earthquake Engineering and Structural Dynamics, Vol. 22, No. 11, pp. 925–941.

Nagarajaiah

and Mate

(1998). “Semi-active control of continuously variable stiffness system”, Proceedings of the Second World Conference on Structural Control, Vol. 1, Kyoto, Japan, July, pp. 397–405.

Nagarajaiah

and Varadarajan

(2005). “Short time Fourier transform algorithm for wind response control of buildings with variable stiffness TMD”, Engineering Structures, Vol. 27, No. 3, pp. 431–441.

Nagarajaiah

and Sahasrabudhe

(2006). “Seismic response control of smart sliding isolated buildings using variable stiffness systems: An experimental and numerical study”, Earthquake Engineering and Structural Dynamics, Vol. 35, No. 2, pp. 177–197.

Narasimhana

and Nagarajaiah

(2005). “A STFT semi-active controller for base isolated buildings with variable stiffness isolation systems”, Engineering Structures, Vol. 27, No. 4, pp. 514–523.

Nasu

Kobori

Takahashi

Niwa

and Ogasawara

(2001). “Active variable stiffness system with non-resonant control”, Earthquake Engineering and Structural Dynamics, Vol. 30, No. 11, pp. 1597–1614.

10.

Ramaratnam

and Jalili

(2006). “A switched stiffness approach for structural vibration control: Theory and real-time implementation”, Journal of Sound and Vibration, Vol. 291, No. 1–2, pp. 258–274.

11.

Sadek

and Mohraz

(1998). “Semi-active control algorithms for structures with variable dampers”, Journal of Engineering Mechanics, ASCE, Vol. 124, No. 9, pp. 981–990.

12.

Spencer

B.F.

and Nagarajaiah

(2003). “State of the art of structural control”, Journal of Structural Engineering, ASCE, Vol. 129, No. 7, pp. 845–856.

13.

Soong

T.T.

(1990). Active Structural Control: Theory and Practice, Longman Scientific and Technical; New York.

14.

Symans

M.D.

and Constantinou

M.C.

(1999). “Semi-active control system for seismic protection of structures a state-of-the art review”, Engineering Structures, Vol. 21, No. 6, pp. 469–487.

15.

Xinghua

(2000). “Model and analysis of variable stiffness semi-active control system”, Proceedings of the Twelfth World Conference on Earthquake Engineering, Auckland, New Zealand, Paper No. 1516 (CD-ROM).

16.

Yang

J.N.

J.C.

and Li

(1996). “Control of seismic-excited buildings using active variable stiffness systems”, Engineering Structures, Vol. 18, No. 8, pp. 589–596.

17.

Yang

J.N.

Kim

J.H.

and Agrawal

A.K.

(2000). “Resetting semi-active stiffness damper for seismic response control”, Journal of Structural Engineering, ASCE, Vol. 126, No. 12, pp. 1427–1433.