Advances in Adhesive Joining of Carbon Fibre/Polymer Composites to Steel Members for Repair and Rehabilitation of Bridge Structures

Abstract

Generally, it is relatively easy to obtain a high joint strength with most modern bonding systems if these are cured under ideal factory conditions. However, civil engineering construction joints are cured on site and are required to last the lifetime of the structural member in harsh environmental conditions. This implies that site joints might not be constructed and cured as well as those fabricated in the factory.

The paper compares two possible methods for bonding an FRP composite patch/plate to a steel adherend suitable for construction sites. The first method utilises the accepted technique of bonding two dissimilar materials using a two-part cold cure adhesive. The second method employs a pre-impregnated FRP composite plate in conjunction with a compatible film adhesive; these comparisons are undertaken by examining the results of double-strap butt joint tests. A possible site technique using the pre-impregnated FRP composite to upgrade a steel beam whilst it is under a low frequency vibration load is investigated; this represents the repair of a steel bridge constantly under traversing traffic.

The butt joint test results show that on average, the pre-impregnated composite in conjunction with the film adhesive leads to a failure load which is 15% higher than that of the cold setting adhesive technique. The results of the rehabilitated beam tests show that the bonded joint between the pre-impregnated CFRP composite and the steel adherend did not suffer any significant damage from the low frequency vibrations imposed upon the steel beam during the cure period.

Keywords

Polymer composites pre-impregnated composites carbon fibres glass fibres film adhesive cold cure adhesives

Get full access to this article

View all access options for this article.

References

BS 7079 (1989). Preparation of Steel Substrates before Application of Paints and Related Products.

Cadei

J.M.C.

Stratford

T.J.

Hollaway

L.C.

and Duckett

W.G.

(2004). Strengthening Metallic Structures Using Externally-Bonded Fibre-Reinforced-Polymers. CIRIA Report C595, London.

Gettings

and Kinlock

A.J.

(1977). “Surface analysis of polysiloxane/metal oxide interfaces”, Journal of Materials Science, Vol. 12, pp. 2511–2518.

Hollaway

L.C.

Chryssanthopoulos

M.K.

and Moy

S.S.J.

(Eds). (2004). Advanced Polymer Composites for Structural Applications in Construction, Proceedings of ACIC 2004, Woodhead Publishing, Cambridge.

Liu

Silva

P.R.

and Nanni

(2001). “Rehabilitation of steel bridge members with FRP composite materials”, Composites in Construction, Proceedings of CCC 2001, Porto

Portugal

Figueiras

Juvandes

and Furia

(Eds), pp. 613–617.

Mertz

and Gillespie

(1996). “Rehabilitation of steel bridge girders through the application of advanced composite material”, NCHRP 93-ID11, Transportation Research Board, Washington, D.C.

Mosallam

A.S.

and Chakrabarti

P.R.

(1997). “Making connection”, Civil Engineering, ASCE, pp. 56–59.

Photiou

N.K.

Hollaway

L.C.

and Chryssanthopoulos

M.K.

(2003). “Characterisation of adhesively bonded plates for upgrading structural steelwork”, Proceedings (CD-ROM), 10^th International Conference on Structural Faults and Repair, 1–3 July, London, UK.

Photiou

N.K.

(2005). Rehabilitation of Steel Members Utilising Hybrid FRP Composite Material Systems, PhD Thesis, University of Surrey, UK.

10.

Photiou

N.K.

Hollaway

L.C.

and Chryssanthopoulos

M.K.

(2006). “Strengthening of an artificially degraded steel beam utilising a carbon/glass composite system”, Construction and Building Materials, Vol. 20, No. 1–2, pp. 11–21.

11.

Schnerch

Dawood

Rizkalla

and Sumner

(2006). “Proposed design guidelines for strengthening of steel bridges with FRP materials”, Construction and Building Materials, in press.

12.

Schnerch

Stanford

Sumner

and Rizkalla

(2004). “Strengthening steel structures and bridges with high modulus carbon fiber reinforced polymer, resin selections and scaled monopole behavior”, Transportation Research Record, No. 1892, pp. 237–245.

13.

Tavakkolizadeh

and Saadatmanesh

(2003). “Strengthening of steel-concrete composite girders using carbon fibre reinforced polymer sheets”, Journal of Structural Engineering, ASCE, Vol. 129, No. 1, pp. 30–40.

14.

Zhang

Hollaway

L.C.

Teng

J.G.

and Zhang

S.S.

(2006). “Strengthening of steel bridges under low frequency vibrations”, Proceedings, Third International Conference on FRP Composites in Civil Engineering (CICE 2006), Miami, USA.