Bending Analysis of Stiffened Laminated Plates

Abstract

Stiffeners are commonly attached to composite laminates to achieve higher stiffness/weight and strength/weight ratios. A layer-wise finite element formulation is developed for the bending analysis of stiffened laminated plates. The laminated plate is discretized into layers in the thickness direction and then the degenerated shell elements are employed to model each layer. The stiffener is modeled using a general 3-D beam element. Interlayer continuity relations are established for all the layers in the thickness direction. The primary advantage of the proposed finite element model lies in its application to both thin and thick laminated plates. Extensive numerical examples are presented for non-stiffened isotropic plates, non-stiffened laminates, stiffened isotropic and laminated plates. Parametric studies are conducted with different aspect ratios, plate width to thickness ratios, ply orientations, and number of layers. The results agree well with the ones reported in the literature.

Keywords

laminates stiffened plate layered structures elasticity finite element analysis bending behavior

Get full access to this article

View all access options for this article.

References

Barbero

E. J.

(1992) “A 3-D finite element for laminated composites with 2-D kinematic constraints”, Computers & Structures, Vol. 45, No. 2, pp. 263–271.

Bathe

K.-J.

(1982) Finite Element Procedures in Engineering Analysis, Prentice-Hall, Englewood Cliffs, New Jersey.

Biswal

K. C.

and Ghosh

A. K.

(1994) “Finite element analysis for stiffened laminated plates using higher order shear deformation theory”, Computers & Structures, Vol. 53, No. 1, pp. 161–171.

Bhimaraddi

Carr

A. J.

and Moss

P. J.

(1989) “Finite element analysis of laminated shells of revolution with laminated stiffeners”, Computers & Structures, Vol. 33, No. 1, pp. 295–305.

Buragohain

D. N.

Agrawal

S. B.

and Ayyar

R. S.

(1978) “A matching superparametric beam element for shell beam systems”, Computers & Structures, Vol. 9, pp. 175–182

Chang

S. P.

(1973) Analysis of Eccentrically Stiffened Plates, Ph.D. Thesis, University of Missouri, Columbia, MO.

Chattopadhyay

(1993) Linear and Nonlinear Static and Dynamic Analysis of Composite Stiffened Plates by the Finite Element Method, Ph. D. Dissertation, India Institute of Technology, India.

Christensen

R. M.

(1979) Mechanics of Composite Materials, Wiley-Interscience, New York.

Ferguson

G. H.

and Clark

R. D.

(1979) “A variable thickness, curved beam and shell stiffening element with shear deformations”, International Journal for Numerical Methods in Engineering, Vol. 14, pp. 581–592.

10.

Guo

M.W.

(1995) Bending, Free vibration and Buckling of Stiffened Plates and Laminates, Ph.D. Dissertation, University of Kentucky

11.

Harik

I. E.

and Salamoun

(1988) “The analytical strip method of solution for stiffened rectangular plates”, Computers and Structures, Vol. 29, No. 2, pp. 283–291.

12.

Hinton

and Campbell

J. S.

(1974) “Local and global smoothing of discontinuous finite element functions using a least square method”, International Journal for Numerical Methods in Engineering, Vol. 8, pp. 461–480.

13.

Liao

C.L.

and Reddy

J.C.

(1990) “Analysis of anisotropic, stiffened composite laminates using a continuum-based shell element”, Computers and Structures, Vol. 34, No. 6, pp. 805–815.

14.

Liew

K.M.

and Lim

C.M.

(1996) “Vibration studies on moderately thick doubly-curved elliptic shallow shells”, Acta Mechanica, Vol. 116, No. 1–4, pp. 83–96.

15.

Lim

C.M.

and Liew

K.M.

(1995) “A higher order theory for vibration of shear deformation cylindrical shallow shells”, International Journal of Mechanical Science, Vol. 37, No. 3, pp. 277–295.

16.

Mallikarjuna and Kant

(1993) “A critical review and some results of recently developed refined theories of fiber-reinforced laminated composites and sandwiches”, Computers & Structures, Vol. 23, pp. 293–312.

17.

McBean

M. D.

(1968) Analysis of Stiffened Plates, Ph. D. Dissertation, Stanford University.

18.

Mukherjee

and Mukhopadhyay

(1988) “Finite element free vibration of eccentrically stiffened plates”, Computers & Structures, Vol. 30, No. 6, pp. 1303–1317.

19.

O'Leary

J. R.

and Harari

(1985) “Finite element analysis of stiffened plates”, Computers & Structures, Vol. 21, No. 5, pp. 973–985

20.

Palani

M. P.

and Ibrahimkhail

A. K.

(1978) “Constraint method analysis of stiffened plates”, Computers & Structures, Vol. 8, No. 1, pp. 51–60.

21.

Puckett

J. A.

(1986) “Application of compound strip method for the analysis of slab-girder bridges”, Computers and Structures, Vol. 22, No. 6, pp. 979–986.

22.

Reddy

J. N.

(1984) Energy and Variational Methods in Applied Mechanics, John Wiley & Sons, Inc. New York.

23.

Reddy

J. N.

(1989) “On the generalization of displacement based laminate theories”, Applied Mechanics Review, Vol. 27, pp. 361–382.

24.

Rossow

M. P.

and Ibrahimkhail

A. K.

(1978) “Constraint method analysis of stiffened plates.” Computers & Structures, Vol. 8, No. 2, pp. 51–60.

25.

Sciuva

M. D.

(1992) “Multilayered anisotropic plate models with continuous interlaminar stresses”, Composite Structures, Vol. 22, No. 3, pp. 149–167.

26.

Troitsky

M. S.

(1976) Stiffened Plates: Bending, Stability and Vibrations, Elsevier Scientific Publishing Co., New York.

27.

Vu-Quoc

Deng

and Tan

X.G.

(2000) “Geometrically-exact sandwich shells: The static case”, Computer Methods in Applied Mechanics and Engineering, Vol. 189, No. 1, pp. 167–203.

28.

Whitney

J. M.

(1969) “Bending-extensional coupling in laminated plates under transverse loading”, Journal of Composite Materials, Vol. 3, pp. 20–28.