This paper presents two novel concepts to enhance the accuracy of damage detection using the Modal Strain Energy based Damage Index (MSEDI) with the presence of noise in the mode shape data. Firstly, the paper presents a sequential curve fitting technique that reduces the effect of noise on the calculation process of the MSEDI, more effectively than the two commonly used curve fitting techniques; namely, polynomial and Fourier's series. Secondly, a probability based Generalized Damage Localization Index (GDLI) is proposed as a viable improvement to the damage detection process. The study uses a validated ABAQUS finite-element model of a reinforced concrete beam to obtain mode shape data in the undamaged and damaged states. Noise is simulated by adding three levels of random noise (1%, 3%, and 5%) to the mode shape data. Results show that damage detection is enhanced with increased number of modes and samples used with the GDLI.
ABAQUS (2008). Abaqus Analysis User Manual, Version 6.8, Dassault Systèmes Simulia Corp., Providence, RI, USA.
2.
AlvandiA. and CremonaC. (2005). “Assessment of vibration-based damage identification techniques”, Journal of Sound and Vibration, Vol. 292, No. 1–2, pp. 179–202.
3.
CarrascoC.OseguedaR.FerregutC. and GrygierM. (1997). “Damage localization in a space truss model using modal strain energy”. Proceedings of International Modal Analysis Conference (IMAC-XV), Orlando, FL, USA, pp. 1786–1792.
4.
ChanceJ.TomlinsonG.R. and WordenK. (1994). “Simplified approach to the numerical and experimental modelling of the dynamics of a cracked beam”. Proceedings of International Modal Analysis Conference (IMAC-XII), Honolulu, HI, USA.
5.
CornwellP.DoeblingS.W. and FarrarC.R. (1999). “Application of the strain energy damage detection method to plate-like structures”, Journal of Sound and Vibration, Vol. 224, No. 2, pp. 359–374.
6.
CornwellP.KamM.CarlsonB.HoerstB.DoeblingS. and FarrarC. (1998). “Comparative study of vibration-based damage ID algorithms”. Proceedings of International Modal Analysis Conference (IMAC-XVI), Santa Barbara, CA, USA, pp. 1710–1716.
7.
CuradelliR.O.RieraJ.D.AmbrosiniD. and AmaniM.G. (2008). “Damage detection by means of structural damping identification”, Engineering Structures, Vol. 30, No. 12, pp. 3497–3504.
8.
DoeblingS.W. and FarrarC.F. (1998). “Statistical damage identification techniques applied to the I-40 bridge over the Rio Grande River”. Proceedings of International Modal Analysis Conference (IMAC-XVI), Santa Barbara, CA, USA, pp. 1717–1724.
9.
DoeblingS.W.FarrarC.R.PrimeM.B. and ShevitD.W. (1996). Damage Identification and Health Monitoring of Structural and Mechanical Systems from Changes in their Vibration Characteristics: A Literature Review, Report No. LA-13070-MS, Los Alamos National Laboratory (LANL), New Mexico, USA.
10.
LeeL.S.KarbhariV.M. and SikorskyC. (2004). Investigation of Integrity and Effectiveness of RC Bridge Deck Rehabilitation with CFRP Composites, Final report submitted to the California Department of Transportation (Caltrans) under Contract No. 59A0249, University of California, San Diego, California, USA.
11.
LiJ.ChoiF.C.SamaliB. and CrewsK. (2007). “Damage localization and severity evaluation of a beam-like timber structure based on modal strain energy and flexibility approaches”, Journal of Building Appraisal, Vol. 2, No. 4, pp. 323–334.
12.
MaeckJ.AbdelWahabM. and De RoecG. (1999). “Damage localization in reinforced concrete beams by dynamic stiffness determination”. Proceedings of International Modal Analysis Conference (IMAC-XVII), Orlando, FL, USA, pp. 1289–1295.
13.
MATLAB (2010). MATLAB, The MathWorks Inc., Natick, MA, USA.
14.
MazurekD.F. (1997). “Modal sensitivity to damage in multigirder bridges”. Proceedings of International Modal Analysis Conference (IMAC-XV), Orlando, FL, USA, pp. 1898–1982.
15.
OseguedaR.A.CarrascoC.J. and MezaA. (1997). “A modal strain energy distribution method to localize and quantify damage”. Proceedings of International Modal Analysis Conference (IMAC-XV), Orlando, FL, USA, pp. 1298–1304.
16.
PandeyA.K.BiswasM. and SammanM.M. (1991). “Damage detection from changes in curvature mode shapes”, Journal of Sound and Vibration, Vol. 145, No. 2, pp. 321–332.
17.
ParkS.KimY.B. and StubbsN. (2002). “Nondestructive damage detection in large structures via vibration monitoring”, Electronic Journal of Structural Engineering, Vol. 2, pp. 59–75.
18.
PereraR.HuertaC. and OrquinJ.M. (2008). “Identification of damage in RC beams using indexes based on local modal stiffness”, Construction and Building Materials, Vol. 22, No. 8, pp. 1656–1667.
19.
PereyraL.OseguedaR.CarrascoC. and FerregutC. (2000). “Detection of damage in a stiffened plate from fusion of modal strain energy differences”. Proceedings of International Modal Analysis Conference (IMAC-XVIII), San Antonio, TX, USA, pp. 1556–1562.
20.
PetroS.H.EnS.GangaRaoS. and VenkatappaS. (1997). “Damage detection using vibration measurement”. Proceedings of International Modal Analysis Conference (IMAC-XV), Orlando, FL, USA, pp. 113–119.
21.
SalawuO.S. (1997). “Detection of structural damage through changes in frequency: A review”, Engineering Structures, Vol. 19, No. 9, pp. 718–723.
22.
SaleshF.SupriyadiB.SuhendroB. and TranD. (2004). “Damage detection in non-prismatic reinforced concrete beams using curvature mode shapes”. Structural Integrity and Fracture International Conference: SIF2004, Brisbane, Australia, September, pp. 331–337.
23.
SazonovE. and KlinkhachornP. (2004). “Optimal spatial sampling interval for damage detection by curvature or strain energy mode shapes”, Journal of Sound and Vibration, Vol. 285, No. 4–5, pp. 783–801.
24.
ShiZ.Y. and LawS.S. (1998). “Structural damage localization from modal strain energy change”, Journal of Sound and Vibration, Vol. 218, No. 5, pp. 825–844.
25.
ShihH.W.ThambiratnamD.P. and ChanT.H.T. (2009). “Vibration based structural damage detection in flexural members using multi-criteria approach”, Journal of Sound and Vibration, Vol. 323, No. 3–5, pp. 645–661.
26.
StubbsN.KimJ.T. and FarrarC.R. (1995). “Field verification of a non-destructive damage localization and severity estimation algorithm”. Proceedings of 13th International Modal Analysis Conference, Nashville, Tennessee, USA, pp. 210–218.
27.
StubbsN.KimJ.T. and TopoleK. (1992). “An efficient and robust algorithm for damage localization in offshore platroms”. Proceedings ASCE 10th Structures Congress, San Antonio, TX, USA, pp. 543–546.
28.
WahalathantriB.L.ThambiratnamD.P.ChanT.H.T. and FawziaS. (2010). “An improved modal strain energy method for damage assessment”. Proceedings of the 10th International Conference on Computational Structures Technology, Valencia, Spain, September.
29.
WahalathantriB.L.ThambiratnamD.P.ChanT.H.T. and FawziaS. (2011). “A material model for flexural crack simulation in reinforced concrete elements using ABAQUS”. Proceedings of the eddBE2011 Conference, Brisbane, Australia, April.
30.
YooS.H. and KimB.S. (2000). “Characterization of a crack in a plate using strain mode shapes”. Proceedings of International Modal Analysis Conference (IMAC-XVII), San Antonio, TX, USA, pp. 1790–1795.
31.
YooS.H.KwakH.K. and KimB.S. (1999). “Detection and location of a crack in a plate using modal analysis”. Proceedings of International Modal Analysis Conference (IMAC-XVII), Orlando, FL, USA, pp. 1902–1908.
