Sage Journals: Discover world-class research

Abstract

Starting from simple notions of paper folding, a review of current challenges regarding folds and structures is presented. A special focus is dedicated to folded tessellations which are raising interest from the scientific community. Finally, the different mechanical modeling of folded structures are investigated. This reveals efficient applications of folding concepts in the design of structures.

Keywords

Origami Folded Tessellations Structures Folds

Get full access to this article

View all access options for this article.

References

Hannes

C. Schniepp

Konstantin

N. Kudin

Je-Luen Li Prud'homme

Robert K

Roberto Car Saville

Dudley A

Ilhan

A Aksay

Bending properties of single functionalized graphene sheets probed by atomic force microscopy. ACS Nano, 2(12): 2577–2584, 2008. ISSN 1936–086X. doi: 10.1021/nn800457s.

Steven Cranford Dipanjan Sen Markus

J. Buehler

Meso-origami: Folding multilayer graphene sheets. Appl. Phys. Lett., 95(12):123121, 2009. ISSN 00036951. doi: 10.1063/1.3223783. URL http://link.aip.org/link/APPLAB/v95/i12/p123121/s1&Agg=doi.

Hidetoshi Kobayashi Kresling

Vincent

J. F. V.

. The geometry of unfolding tree leaves. Proc. R. Soc. B Biol. Sci., 265(1391):147–154, January 1998. ISSN 0962–8452. doi: 10.1098/rspb.1998.0276. URL http://rspb.royalsocietypublishing.org/cgi/doi/10.1098/rspb.1998.0276.

Dominique Buisson . Manuel pratique d'origami. Celiv, Paris, 1990. ISBN 2–86535–124–6.

Toshikazu Kawasaki Ryuhei Uehara Tomohiro Tachi Jun Maekawa , editors. The 6th International Meeting on Origami in Science, Mathematics and Education. The 6OSME Organizing committee, 2014. URL http://origami.gr.jp/6osme/.

Edwin

A Peraza-Hernandez

Darren

J Hartl

Richard

Malak Jr Dimitris

C Lagoudas

. Origami-inspired active structures: A synthesis and review. Smart Mater. Struct., 23(9):094001, 2014. ISSN 0964–1726. doi: 10.1088/0964–1726/23/9/094001. URL http://stacks.iop.org/0964#-1726/23/i=9/a=094001?key=crossref.6226c53c3ab2492e5686c0d4be08ea2e.

Stewart

, 2007, Mathematics: Some assembly needed. Nature, 448(7152), p. 419.

Felton

Tolley

Demaine

Erik D.

Rus

Wood

. A method for building self-folding machines. Science, 345(6197):644–646, 2014. ISSN 0036–8075. doi: 10.1126/science.1252610. URL http://www.sciencemag.org/cgi/doi/10.1126/science.1252610.

Arzu

Gönenç Sorguç

Ichiro

Hagiwara

Semra

Arslan Selçuk

. Origamics In Architecture: A Medium Of Inquiry Or Design In Architecture. METU J. Fac. Archit., 26(2):235–247, December 2009. ISSN 02585316. doi: 10.4305/METU.JFA. 2009.2.12.

10.

David Dureisseix . An Overview of Mechanisms and Patterns with Origami. Int. J. Sp. Struct., 27(1):1–14, March 2012. ISSN 0266–3511. doi: 10.1260/0266–3511.27.1.1. URL http://multi-science.metapress.com/openurl.asp?genre=article&id=doi:10.1260/0266#-3511.27.1.1.

11.

Nenad Sekularac Jelena Ivanovic-Sekularac Jasna Cikic-Tovarovic . Folded structures in modern architecture. Facta Univ. - Ser. Archit. Civ. Eng., 10(1):1–16, 2012. ISSN 0354–4605. doi: 10.2298/FUACE1201001S. URL http://www.doiserbia.nb.rs/Article.aspx?ID=0354#-46051201001S.

12.

Jean-Marie Delarue . Plis, Règles Géométriques et Principes Structurants. Ecole D'architecture Paris-Villemin, 1997.

13.

Helmut Pottmann Alexander Schiftner Pengbo Bo Heinz Schmiedhofer Wenping Wang Niccolo Baldassini Johannes Wallner . Freeform surfaces from single curved panels. ACM Trans. Graph., 27(3):1, 2008. ISSN 07300301. doi: 10.1145/1360612.1360675.

14.

Vincent Borrelli Saïd Jabrane Francis Lazarus Boris Thibert . Flat tori in three-dimensional space and convex integration. Proc. Natl. Acad. Sci. U. S. A., 109(19):7218–23, May 2012. ISSN 1091–6490. doi: 10.1073/pnas. 1118478109. URL http://www.pnas.org/content/109/19/7218.shorthttp://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=3358891&tool=pmcentrez&rendertype=abstract.

15.

Jiangmei Wu . Torus, 2013. URL http://www.foldedlightart.com/#!torus/cfv8.

16.

Paul Jackson . Folding techniques for designers: from sheet to form. Laurence King Pub., London, 2011. ISBN 9781856697217 1856697215.

17.

Lechenault

Adda-Bedia

. Origami switches: generic bistability in creased sheets. preprint, 2015.

18.

David

A. Huffman

Curvature and creases: A primer on paper. IEEE Trans. Comput., C-25(10):1010–1019, October 1976. ISSN 0018–9340. doi: 10.1109/TC.1976.1674542. URL http://ieeexplore.ieee.org/lpdocs/epic03/wrapper.htm?arnumber=1674542.

19.

Koryo Miura . A Note on Intrinsic Geometry of Origami. in Res. Pattern Form., pages 91–102. R. Takaki, ktk scient edition, 1994.

20.

Robert

J. Lang

. Origami design secrets : mathematical methods for an ancient art. A.K. Peters, Natick MA, 2003. ISBN 1568811942 9781568811949.

21.

Robert

J. Lang

. Crease Pattern Gallery. URL http://www.langorigami.com/art/creasepatterns/creasepatterns_gallery.php.

22.

Sarah-Marie Belcastro Thomas

C. Hull

. Modelling the folding of paper into three dimensions using affine transformations. Linear Algebra Appl., 348(1–3):273–282, 2002. ISSN 00243795. doi: 10.1016/S0024–3795(01)00608–5.

23.

Hellmuth Stachel . A kinematic approach to Kokotsakis meshes. Comput. Aided Geom. Des., 27(6):428–437, 2010. ISSN 01678396. doi: 10.1016/j.cagd.2010.05.002. URL http://dx.doi.org/10.1016/j.cagd.2010.05.002.

24.

Weina Wu Zhong You . Modelling rigid origami with quaternions and dual quaternions. Proc. R. Soc. A Math. Phys. Eng. Sci., 466(2119):2155–2174, February 2010. ISSN 1364–5021. doi: 10.1098/rspa.2009.0625. URL http://rspa.royalsocietypublishing.org/cgi/doi/10.1098/rspa.2009.0625.

25.

Tomohiro Tachi . Simulation of Rigid Origami. in 4th Int. Meet. Origami Sci. Technol., 2006.

26.

Erik

D. Demaine

Martin

L. Demaine

Vi Hart Gregory

N Price

Tomohiro Tachi . (Non)existence of Pleated Folds: How Paper Folds Between Creases. Abstr. from 7th Japan Conf. Comput. Geom. Graphs (JCCGG 2009), page 19, June 2009. URL http://arxiv.org/abs/0906.4747.

27.

Korte

A. P.

Starostin

E. L.

van der Heijden

G. H. M.

. Triangular buckling patterns of twisted inextensible strips. Proc. R. Soc. A Math. Phys. Eng. Sci., 467 (2125): 285–303, June 2010. ISSN 1364–5021. doi: 10.1098/rspa.2010.0200.URL http://rspa.royalsocietypublishing.org/cgi/doi/10.1098/rspa.2010.0200.

28.

Shin-Ya Miyazaki . An Origami Playing Simulator in the Virtual Space. J. Vis. Comput. Animat., 7(March 1995):25–42, 1996. ISSN 10498907. doi: 10.1002/(SICI)1099–1778(199601)7:1<25::AID-VIS134> 3.0.CO;2-V.

29.

Balkcom

D. J.

Mason

M. T.

. Robotic origami folding. Int. J. Rob. Res., 27(5):613–627, May 2008. ISSN 0278–3649. doi: 10.1177/0278364908090235. URL http://ijr.sagepub.com/cgi/doi/10.1177/278364908090235.

30.

Day

S. A.

. An Introduction to Dynamic Relaxation. Eng., 29:218–221, 1965.

31.

Michael Barnes . Form and stress engineering of tension structures. Struct. Eng. Rev., 6(3), 1994. URL http://opus.bath.ac.uk/33733/.

32.

Cyril Douthe Olivier Baverel . Design of nexorades or reciprocal frame systems with the dynamic relaxation method. Comput. & Struct., 87(21–22):1296–1307, 2009. ISSN 0045–7949. URL http://www.sciencedirect.com/science/article/pii/S0045794909001862.

33.

Daniel Piker . Kangaroo Physics, 2015. URL http://www.food4rhino.com/project/kangaroo?etx.

34.

Jun Mitani . ORIPA: Origami Pattern Editor, 2005. URL http://mitani.cs.tsukuba.ac.jp/oripa/.

35.

Tomohiro Tachi . Geometric considerations for the design of rigid origami structures. in Assoc. Shell Spat. Struct., 2010. URL http://www.tsg.ne.jp/tT/cg/DesignOfRigidOrigamiStructures_tachi_IASS2010.pdf.

36.

Zhonghua Xi Jyh-Ming Lien . Folding rigid origami with closure constraints. in ASME 2014 Int. Des. Eng. Tech. Conf. Comput. Inf. Eng. Conf., 2014. doi: 10.1115/DETC2014–35556.

37.

Francesco Gioia David Dureisseix René Motro Bernard Maurin . Design and Analysis of a Foldable/Unfoldable Corrugated Architectural Curved Envelop. J. Mech. Des., 134(3):031003, 2012. ISSN 10500472. doi: 10.1115/1.4005601. URL http://link.aip.org/link/JMDEDB/v134/i3/p031003/s1&Agg=doi.

38.

Demaine

Erik D.

Martin

L. Demaine

. Curved Crease Folding a Review on Art, Design and Mathematics. in Proc. IABSE-IASS Symp. Taller, Longer, Light. (IABSE-IASS 2011), 2011.

39.

Jun Mitani . Column-shaped origami design based on mirror reflections. in 15th Int. Conf. Geom. Graph., 2012.

40.

Erik

D. Demaine

Demaine

Martin L.

Duks Koschitz . Reconstructing David Huffman's Legacy in Curved-Crease Folding. in th Int. Conf. Origami Sci. Math. Educ., 2010.

41.

Bentley

Kyungeun Ko.

Kyungeun

, 2013. URL http://www.robofold.com/make/consultancy/projects/bentley-and-kyungeun-ko.

42.

Duncan

J. P.

Duncan

J. L.

. Folded Developables. Proc. R. Soc. Lond. A. Math. Phys. Sci., 383(1784):191–205, September 1982. ISSN 0080–4630. doi: 10.1098/rspa.1982.0126. URL http://links.jstor.org/sici?sici=0080#-4630(19820908)383:1784<191:FD>2.0.CO;2-Bhttp://rspa.royalsocietypublishing.org/cgi/doi/10.1098/rspa.1982.0126.

43.

Kergosien

Gotoda

Kunii

T.L.

Bending and Creasing virtual paper. IEEE Comput. Graph. Appl., 14(1):40–48, January 1994. ISSN 0272–1716. doi: 10.1109/38.250917. URL http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=250917http://ieeexplore.ieee.org/lpdocs/epic03/wrapper.htm?arnumber=250917.

44.

Martin Kilian Simon Flöry Zhonggui Chen Niloy

Mitra Alla Sheer Helmut Pottmann . Curved folding. In ACM SIGGRAPH 2008 Pap. - SIGGRAPH '08, page 1, New York, New York, USA, 2008. ACM Press. ISBN 9781450301121. doi: 10.1145/1399504.1360674. URL http://dl.acm.org/citation.cfm?id=1360674http://portal.acm.org/citation.cfm?doid=1399504.1360674.

45.

Tomohiro Tachi Gregory Epps . Designing One-DOF Mechanisms for Architecture by Rationalizing Curved Folding. in Int. Symp. Algorithmic Des. Archit. Urban Des., 2011. URL http://www.tsg.ne.jp/tT/cg/RigidOrigamiCurvedFoldingTachiEppsALGODE2011.pdf.

46.

Ben Amar

Pomeau

. Crumpled paper, 1997. ISSN 1364–5021.

47.

Enrique Cerda Francisco Melo . Conical dislocations in crumpling. Nature, 401(September), 1999. doi: 10.1038/43395.

48.

Cerda

Mahadevan

Pasini

J M

. The elements of draping. Proc. Natl. Acad. Sci. U. S. A., 101(7):1806–1810, 2004. ISSN 0027–8424. doi: 10.1073/pnas. 0307160101.

49.

Enrique Cerda Mahadevan

. Confined developable elastic surfaces: Cylinders, cones and the Elastica. Proc. R. Soc. A Math. Phys. Eng. Sci., 461(2055):671–700, March 2005. ISSN 1364–5021. doi: 10.1098/rspa.2004. 1371. URL http://rspa.royalsocietypublishing.org/cgi/doi/10.1098/rspa.2004.1371http://dx.doi.org/10.1098/rspa.2004.1371.

50.

Witten

TAA

. Stress focusing in elastic sheets. Rev. Mod. Phys., 79(2):643–675, 2007. doi: 10.1103/RevModPhys. 79.643. URL http://rmp.aps.org/abstract/RMP/v79/i2/p643_1.

51.

William

H. Frey

. Modeling buckled developable surfaces by triangulation. Comput. Des., 36(4):299–313, February 2004. ISSN 00104485. doi: 10.1016/S0010–4485(03)00105–2. URL http://www.sciencedirect.com/science/article/pii/S0010448503001052.

52.

Taketoshi Nojima . Origami Modelling of Functional Structures based on Organic Patterns. Nature, 1996.

53.

Taketoshi Nojima . Modelling of Folding Patterns in Flat Membranes and Cylinders by Using Origami., 2000. ISSN 0387–5024.

54.

Hunt

Giles W.

Ichiro Ario . Twist buckling and the foldable cylinder: An exercise in origami. Int. J. Non. Linear. Mech., 40(6):833–843, 2005. ISSN 00207462. doi: 10.1016/j.ijnonlinmec.2004.08.011.

55.

Tomohiro Tachi . Origamizing polyhedral surfaces. IEEE Trans. Vis. Comput. Graph., 16(2):298–311, 2010. ISSN 10772626. doi: 10.1109/TVCG.2009.67.

56.

Newton

Paper for packing Lining and other purposes, December 1880. URL http://www.google.com/patents/US235449.

57.

Ichikawa

. Reinforced composite corrugate body, US Patent: US 5,314, 738, 1994.

58.

Elsayed

E.A.

Basily

. A continuous folding process for sheet materials. Int. J. Mater. Prod. Technol., 21(1/2/3): 217, 2004. ISSN 0268–1900. doi: 10.1504/IJMPT.2004.004753. URL http://www.inderscience.com/link.php?id=4753http://inderscience.metapress.com/index/unkcqjjh8g2p9f40.pdf.

59.

Hochfeld

. Process and Machine for Pleating pliable materials, US2901951, 1959.

60.

Edward

Rapp

. Sandwich-type structural element, US2963128, 1960.

61.

Gewiss

L V

. Procédé et machines pour le façonnage de structures chevronnées et de structures dérivant des structures chevronnées, 1968.

62.

Koryo Miura . Zeta-Core Sandwich - Its Concept and Realization. ISAS Rep., 37(6):137–164, 1972. ISSN 03721418. URL http://ci.nii.ac.jp/naid/110001101664/en/.

63.

Eli Davis Demaine

Erik D.

Martin

L. Demaine

, Jennifer Ramseyer, and Origami Tessellations. Reconstructing David Huffman's Origami Tessellations 1. J. Mech. Des., 135(11):111010, October 2013. ISSN 1050–0472. doi: 10.1115/1.4025428. URL http://mechanicaldesign.asmedigitalcollection.asme.org/article.aspx?doi=10.111/1.4025428.

64.

Eric Gjerde . Origami tessellations: awe-inspiring geometric designs. A K Peters, Wellesley, Mass., 2009. ISBN 9781568814513 1568814518 9781579909796 1579909795.

65.

Keith

A. Seffen

Compliant shell mechanisms, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 370(1965): 2010–2026, 2012.

66.

Mark Schenk Simon

D Guest

. Geometry of Miura-folded metamaterials. Proc. Natl. Acad. Sci. U. S. A., 110(9): 3276–81, February 2013. ISSN 1091–6490. doi: 10.1073/pnas.1217998110. URL http://www.ncbi.nlm.nih.gov/pubmed/23401549.

67.

Zhiyan

Y. Wei

Zengcai

V. Guo

Levi Dudte Liang

Haiyi Y.

Mahadevan

. Geometric Mechanics of Periodic Pleated Origami. Phys. Rev. Lett., 110(21):215501, November 2013. ISSN 0031–9007. doi: 10.1103/PhysRevLett.110.215501. URL http://arxiv.org/abs/1211.6396http://link.aps.org/doi/10.1103/PhysRevLett.110.215501.

68.

Zhong You . Folding structures out of flat materials. Science, 345(6197):623–624, 2014. ISSN 0036–8075. doi: 10.1126/science.1257841. URL http://www.sciencemag.org/cgi/doi/10.1126/science.1257841.

69.

Cheng Lv Deepakshyam Krishnaraju Goran Konjevod Hongyu Yu Hanqing Jiang . Origami based Mechanical Metamaterials. Sci. Rep., 4:5979, January 2014. ISSN 2045–2322. doi: 10.1038/srep05979. URL http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=4124469&tool=pmcentrez&rendertype=abstracthttp://www.nature.com/srep/2014/140807/srep05979/full/srep05979.html.

70.

Silverberg

J. L.

Evans

A. A.

McLeod

Hayward

R. C.

Hull

Thomas C.

Santangelo

C. D.

Cohen

. Using origami design principles to fold reprogrammable mechanical metamaterials. Science, 345(6197): 647–650, 2014. ISSN 0036–8075. doi: 10.1126/science. 1252876. URL http://www.sciencemag.org/cgi/doi/10.1126/science.1252876.

71.

Jesse

L Silverberg

Jun-Hee Na Evans

Arthur A

Bin Liu Hull

Thomas C.

Santangelo

Christian D

Lang

Robert J.

Hayward

Ryan C

Itai Cohen . Origami structures with a critical transition to bistability arising from hidden degrees of freedom. Nat. Mater., 14(March):1–5, 2015. doi: 10.1038/NMAT4232.

72.

Resch

Ronald D.

Hans Christiansen . The design and analysis of kinematic folded-plate systems. in Proc. Symp. folded plates Prism. Struct. Int. Assoc. shell Struct., Vienna, 1970.

73.

Koryo Miura . New structural form of sandwich core, 1975. ISSN 0021–8669.

74.

Arthur Lebée Karam Sab . Transverse shear stiffness of a chevron folded core used in sandwich construction. Int. J. Solids Struct., 47(18–19):2620–2629, September 2010. ISSN 00207683. doi: 10.1016/j.ijsolstr.2010.05. 024. URL http://www.sciencedirect.com/science/article/B6VJS-506RCW3#-1/2/70a945e9ed2d9b63a1eb91826f306304http://linkinghub.elsevier.com/retrieve/pii/S0020768310002027.

75.

Arthur Lebée Karam Sab . Homogenization of thick periodic plates: Application of the Bending-Gradient plate theory to a folded core sandwich panel. Int. J. Solids Struct., 49(19–20):2778–2792, October 2012. ISSN 00207683. doi: 10.1016/j.ijsolstr.2011.12.009. URL http://linkinghub.elsevier.com/retrieve/pii/S0020768311004173.

76.

Kling

D H

. Doubly periodic flat surfaces in three-space. PhD Thesis, Rutgers Univ., October 1997.

77.

Kling

D H

. Paterning technology for folded sheet structures, US 6,935, 997, 2005.

78.

Czaplicki

R M

. Cellular core structure providing gridlike bearing surfaces on opposing parallel planes of the formed core, US 5, 028, 474, 1991.

79.

Charles Hoberman . Curved pleated sheet structures, 1993. URL http://www.google.com/patents/US5234727.

80.

Tomohiro Tachi . Generalization of rigid-foldable quadrilateral-mesh origami. In Proc. IASS Symp., pages 173–179, Alfonso XII, 3, Madrid, 28014, Spain, 2009. Int. Association for Shell and Spatial Structures.

81.

Hellmuth Stachel . Remarks On Miura-Ori, A Japanese Folding Method. in Int. Conf. Eng. Graph. Des., pages 2–5, 2009.

82.

Martin Trautz Arne Kunstler . Deployable folded plate structures–folding patterns based on 4-fold-mechanism using stiff plates. In Domingo

Lazaro

, editors, Proc. Int. Assoc. Shell Spat. Struct. Symp. 2009, Val. Evol. Trends Des. Anal. Constr. Shell Spat. Struct., 2009. URL http://trako.arch.rwth-aachen.de/downloads/PAP60kuenstler.pdf.

83.

Tomohiro Tachi . Freeform variations of origami. J. Geom. Graph., 14(2):203–215, 2010. ISSN 14338157.

84.

Andreas

Falk

Von Buelow

Peter

Poul

Henning Kirkegaard

. Folded plate structures as building envelopes. in World Conf. Timber Eng., Auckland, 2012. URL http://www.timberdesign.org.nz/WCTE2012.cfm/view/459/parent/47.

85.

Valentina Beatini Koray Korkmaz . Shapes of Miura Mesh Mechanism with Mobility One. Int. J. Sp. Struct., 28(2): 101–114, 2013. ISSN 0266–3511. doi: 10.1260/0266–3511.28.2.101. URL http://multi-science.metapress.com/openurl.asp?genre=article&id=doi:10.1260/0266#-3511.28.2.101.

86.

Yves Klett . Realtime Rigid Folding Algorithm for Quadrilateral-Based 1-DOF Tessellations. in Vol. 6B 37th Mech. Robot. Conf., page V06BT07A031. ASME, August 2013. ISBN 978–0–7918–5594–2. doi: 10.1115/DETC2013–12659. URL http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?doi=10.1115/DETC2013#-12659.

87.

Joseph

M. Gattas

Weina Wu Zhong You . Miura-Base Rigid Origami: Parameterizations of First-Level Derivative and Piecewise Geometries. J. Mech. Des., 135(11):111011, October 2013. ISSN 1050–0472. doi: 10.1115/1.4025380. URL http://mechanicaldesign.asmedigitalcollection.asme.org/article.aspx?doi=10.1115/1.4025380.

88.

Pooya Sareh Simon Guest . A Framework for the Symmetric Generalisation of the Miura-ori. Int. J. Sp. Struct., in-press, 2015.

89.

Zeming Song Teng Ma Rui Tang Qian Cheng Xu Wang Deepakshyam Krishnaraju Rahul Panat Chan

Candace K.

Hongyu Yu , and Hanqing Jiang. Origami lithium-ion batteries. Nat. Commun., 5:1–6, 2014. ISSN 2041–1723. doi: 10.1038/ncomms4140. URL http://www.nature.com/doifinder/10.1038/ncomms4140.

90.

El-Sawi

A.M. M

Wifi

A.S. S

Younan

M.Y. Y

Elsayed

E.A.

Basily

. Application of folded sheet metal in flat bed solar air collectors. Appl. Therm. Eng., 30(8–9):864–871, June 2010. ISSN 13594311. doi: 10.1016/j.applthermaleng.2009.12.018. URL http://www.sciencedirect.com/science/article/B6V1Y-4Y34WHN-2/2/54b65d775dd48af9ad32212a4cd49c55http://linkinghub.elsevier.com/retrieve/pii/S1359431109003652.

91.

Thill

Etches

Bond

Potter

Weaver

Morphing skins . Aeronaut. J., 112(1129):117–139, 2008. URL http://mechanika.fs.cvut.cz/content/files/PhD_grant/RoyAeroSocMorphSkin.pdf.

92.

Mark Schenk Guest

. Origami folding: A structural engineering approach. In Patsy Wang-Iverson Lang

Robert J.

Mark

YIM

, editors, Origami 5 Fifth Int. Meet. Origami Sci. Math. Educ., pages 1–16, 2011. URL http://books.google.com/books?hl=en&lr=&id=r-k4GSYaV5YC&oi=fnd&pg=PA291&dq=Origami+Folding:+A+Structural+Engineering+Approach&ots=ilrnq2y6m6&sig=nld34zbY3SKDtNwlpjs8VwGEHUs.

93.

Gattas

Joseph M.

Zhong You . Geometric assembly of rigid-foldable morphing sandwich structures. Eng. Struct., 94: 149–159, 2015. ISSN 01410296. doi: 10.1016/j.engstruct.2015.03.019. URL http://linkinghub.elsevier.com/retrieve/pii/S0141029615001558.

94.

Matthew Santer Sergio Pellegrino . Concept and Design of a Multistable Plate Structure, July 2011. ISSN 10500472. URL http://dx.doi.org/10.1115/1.4004459.

95.

Saad Ahmed Carlye Lau Adrienne Crivaro Kevin McGough Robert Sheridan Mary Frecker von Lockette

Paris

Zoubeida Ounaies Timothy Simpson Jyh-Ming Lien Rebecca Strzelec . Multi-Field Responsive Origami Structures: Preliminary Modeling and Experiments. In Vol. 6B 37th Mech. Robot. Conf. ASME, August 2013. ISBN 978–0–7918–5594–2. doi: 10.1115/DETC2013–12405. URL http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?doi=10.1115/DETC2013#-12405.

96.

Edwin

A Peraza-Hernandez

Hartl

Darren J

Richard

J Malak

Jr.

Design and numerical analysis of an SMA mesh-based self-folding sheet. Smart Mater. Struct., 22(9):094008, September 2013. ISSN 0964–1726. doi: 10.1088/0964–1726/22/9/094008. URL http://stacks.iop.org/0964#-1726/22/i=9/a=094008?key=crossref.4d4a803cbb577d60d09fb1fec28bd2a4.

97.

Ronald

D. Resch

. Self-supporting structural unit having a series of repetitious geometrical modules, 1968.

98.

Ronald

D. Resch

. The topological design of sculptural and architectural systems. In Proc. June 4–8, 1973, Natl. Comput. Conf. Expo. - AFIPS '73, page 643, New York, New York, USA, 1973. ACM Press. doi: 10.1145/1499586.1499744. URL http://portal.acm.org/citation.cfm?doid=1499586.1499744.

99.

Tomohiro Tachi . Designing Freeform Origami Tessellations by Generalizing Resch's Patterns. J. Mech. Des., 135 (11): 111006, October 2013. ISSN 1050–0472. doi: 10.1115/1.4025389. URL http://mechanicaldesign.asmedigitalcollection.asme.org/article.aspx?doi=10.1115/1.4025389http://origami.c.u-tokyo.ac.jp/$\sim$tachi/cg/FreeformOrigamiTessellationsTachi2013ASME.pdf.

100.

Alfred Brunner . Expansible surface structure, January 1968. URL http://www.google.com/patents/US3362118.

101.

Mark Schenk . Folded Shell Structures. PhD Thesis, University of Cambridge, 2011.

102.

Kenneth

C Cheung

Tomohiro Tachi Sam Calisch Koryo Miura . Origami interleaved tube cellular materials. Smart Mater. Struct., 23(9):094012, 2014. ISSN 0964–1726. doi: 10.1088/0964–1726/23/9/094012. URL http://stacks.iop.org/0964#-1726/23/i=9/a=094012?key=crossref.5a56f20ecc7948e11a834a6628e1f1b0.

103.

Valentina Beatini . Translational method of designing folded plate structures. Int. J. Sp. Struct., in-press, 2015.

104.

Ruikang Xie Yan Chen Joseph

M. Gattas

. Parametrisation and application of cube and eggbox-type folded geometrics. Int. J. Sp. Struct., in-press, 2015.

105.

Tomohiro Tachi . One-dof cylindrical deployable structures with rigid quadrilateral panels. In Proc. IASS Symp., pages 2295–2305, 2009. ISBN 978–84–8363–461–5. URL http://riunet.upv.es/handle/10251/7277.

106.

Wei Yao Jian

S. Dai

. Dexterous Manipulation of Origami Cartons With Robotic Fingers Based on the Interactive Configuration Space. J. Mech. Des., 130(2): 022303, 2008. ISSN 10500472. doi: 10.1115/1.2813783. URL http://mechanicaldesign.asmedigitalcollection.asme.org/article.aspx?articleid=1449633.

107.

Martin Trautz Hans Willi Heyden Ralf Herkrath Thorsten Pofahl Gerhard Hirt Babak Taleb-Araghi David Bailly . Herstellung frei geformter, selbst tragender Faltstrukturen aus Stahlblech mit der inkrementellen Blechumformung (IBU). Stahlbau, 81(12):959–967, December 2012. ISSN 00389145. doi: 10.1002/stab.201201637. URL http://doi.wiley.com/10.1002/stab.201201637.

108.

Ralf Herkrath Martin Trautz . Starre Faltungen als Leichtbauprinzip im Bauwesen. Bautechnik, 88(2): 80–85, February 2011. ISSN 09328351. doi: 0.1002/bate.201110007. URL http://doi.wiley.com/10.1002/bate.201110007.

109.

Arne Künstler Martin Trautz . Wandelbare Faltungen aus biegesteifen Faltelementen. Bautechnik, 88(2): 86–93, February 2011. ISSN 09328351. doi: 10.1002/bate.201110008. URL http://doi.wiley.com/10.1002/bate.201110008.

110.

Jian-Min Li Jan Knippers . Segmental timber plate shell for the Forstpavillon Schwäbisch Gmünd—The application of finger joint in plate structures. Int. J. Sp. Struct., in-press, 2015.

111.

Koryo Miura . Map Fold a La Miura Style, Its Physical Characteristics and Application to the Space Science. In Res. Pattern Form., pages 77–90. R. Takaki, ktk scient edition, 1994.

112.

Koryo Miura Natori

. 2-D array experiment on board a space flyer unit. Sp. Sol. Power Rev., 5: 345–356, 1985.

113.

Robert

J. Lang

. Origami: Complexity in Creases (Again). Eng. Sci., pages 8–19, 2004.

114.

Petra Gruber Sandra Häuplik Barbara Imhof Kürsad Özdemir Rene Waclavicek Maria Antoinetta Perino . Deployable structures for a human lunar base. Acta Astronaut., 61(1–6):484–495, 2007. ISSN 00945765. doi: 10.1016/j.actaastro.2007. 01.055.

115.

Chudoba

van der Woerd

Schmerl

Hegger

. ORICRETE: Modeling support for design and manufacturing of folded concrete structures. Adv. Eng. Softw., June 2013. ISSN 09659978. doi: 10.1016/j.advengsoft.2013.05.004. URL http://linkinghub.elsevier.com/retrieve/pii/S0965997813000665.

116.

Lechenault

Thiria

Adda-Bedia

. Mechanical response of a creased sheet. Phys. Rev. Lett., 112(24):1–5, 2014. ISSN 10797114. doi: 10.1103/PhysRevLett.112.244301.

117.

Marcel Hassis Yves Weinand . Origamifaltwerke –Neue Anwendung für Brettsperrholzplatten. 39. SAH Fortbildungskurs, pages 175–182, 2007.

118.

Stéphane Roche Georoy Mattoni Yves Weinand . Rotational Stiffness at Ridges of Timber Folded-plate Structures. Int. J. Sp. Struct., in-press, 2015.

119.

Andrea Stitic Christopher Robeller Yves Weinand . Timber Folded Plate Structures - Folded Form Analysis. Int. J. Sp. Struct., in-press, 2015.

120.

Christopher Robeller . Interlocking folded plate - Integrated mechanical attachment for structural wood panels. Int. J. Sp. Struct., in-press, 2015.

121.

Ciarlet

Philippe G.

Véronique Lods . Asymptotic analysis of linearly elastic shells. I. Justification of membrane shell equations. Arch. Ration. Mech. Anal., 136(2):119–161, December 1996. ISSN 0003–9527. doi: 10.1007/BF02316975. URL http://www.springerlink.com/index/E2403564W3142N42.pdfhttp://www.springerlink.com/index/10.1007/BF02316975.

122.

Basily

Elsayed

E.A.

. Dynamic axial crushing of multilayer core structures of folded Chevron patterns. Int. J. Mater. Prod. Technol., 21(1/2/3):169, 2004. ISSN 0268–1900. doi: 10.1504/IJMPT.2004.004750. URL http://www.inderscience.com/link.php?id=4750.

123.

Nguyen

M.Q.

Jacombs

S.S.

Thomson

R.S.

Hachenberg

Scott

M.L.

. Simulation of impact on sandwich structures. Compos. Struct., 67(2):217–227, February 2005. ISSN 02638223. doi: 10.1016/j.compstruct.2004.09.018. URL http://www.sciencedirect.com/science/article/B6TWP-4DTBV6Y-3/2/27b185d6e21e57d1f8cb7b3ed7fd3ac5http://linkinghub.elsevier.com/retrieve/pii/S0263822304003290.

124.

Kintscher

Kärger

Wetzel

Hartung

. Stiffness and failure behaviour of folded sandwich cores under combined transverse shear and compression. Compos. Part A Appl. Sci. Manuf., 38(5):1288–1295, May 2007. ISSN 1359835X. doi: 10.1016/j.compositesa.2006.11.008. URL http://www.sciencedirect.com/science/article/B6TWN-4MV71TM-1/2/75a32b5f32913f21a03408927e43d577http://linkinghub.elsevier.com/retrieve/pii/S1359835X06003368.

125.

Sebastian Fischer Klaus Drechsler Sebastian Kilchert Alastair Johnson . Mechanical tests for foldcore base material properties. Compos. Part A Appl. Sci. Manuf., 40(12):1941–1952, December 2009. ISSN 1359835X. doi: 10.1016/j.compositesa.2009.03.005. URL http://www.sciencedirect.com/science/article/B6TWN-4VXTSTK-2/2/a347db537ef46087ea1bd6c6fcecf0fchttp://linkinghub.elsevier.com/retrieve/pii/S1359835X09000724.

126.

Sebastian Heimbs Cichosz

Klaus

Sebastian Kilchert Alastair Johnson . Sandwich structures with textile-reinforced composite foldcores under impact loads. Compos. Struct., 92(6):1485–1497, May 2010. ISSN 02638223. doi: 10.1016/j.compstruct.2009.11.001. URL http://linkinghub.elsevier.com/retrieve/pii/S026382230900470Xhttp://www.sciencedirect.com/science/article/B6TWP-4XNF467#-1/2/9becb70f4e7e28ddf8179475dad75f73.

127.

Baranger

Cluzel

Guidault

P.-A.

. Modelling of the Behaviour of Aramid Folded Cores Up to Global Crushing. Strain, 47:170–178, December 2011. ISSN 00392103. doi: 10.1111/j.1475–1305.2010.00753.x.

128.

Falk Hähnel Klaus Wolf Andreas Haue Alekseev

Kirill a.

Il'dus

M. Zakirov

. Wedge-shaped folded sandwich cores for aircraft applications: From design and manufacturing process to experimental structure validation. CEAS Aeronaut. J., 2(1–4):203–212, August 2011. ISSN 1869–5582. doi: 10.1007/s13272–011–0014–8.

129.

Marc Grzeschik . Performance of Foldcores Mechanical Properties and Testing. In Vol. 6B 37th Mech. Robot. Conf., page V06BT07A042. ASME, August 2013. ISBN 978–0–7918–5594–2. doi: 10.1115/DETC2013–13324. URL http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?doi=10.1115/DETC2013#-13324.

130.

Ralf Sturm Yves Klett Kindervater

Ch.

Voggenreiter

. Failure of CFRP airframe sandwich panels under crash-relevant loading conditions. Compos. Struct., 112:11–21, June 2014. ISSN 02638223. doi: 10.1016/j.compstruct.2014.02.001. URL http://linkinghub.elsevier.com/retrieve/pii/S0263822314000580.

131.

Ralf Sturm Sebastian Fischer . Virtual Design Method for Controlled Failure in Foldcore Sandwich Panels. Appl. Compos. Mater., 2015. ISSN 0929–189X. doi: 10.1007/s10443–015–9436–5.

132.

Sicong Liu Guoxing Lu Yan Chen Yew Wei Leong . Deformation of the Miura-Ori Patterned Sheet. Int. J. Mech. Sci., 2015. ISSN 00207403. doi: 10.1016/j.ijmecsci.2015.05.009. URL http://linkinghub.elsevier.com/retrieve/pii/S0020740315001897.

133.

Sebastian Fischer . Aluminium foldcores for sandwich structure application: Mechanical properties and FE-simulation. Thin-Walled Struct., 90:31–41, 2015. ISSN 02638231. doi: 10.1016/j.tws.2015.01.003. URL http://linkinghub.elsevier.com/retrieve/pii/S0263823115000063.

134.

Baranger

Guidault

P.-A.

Cluzel

. Numerical modeling of the geometrical defects of an origami-like sandwich core. Compos. Struct., 93(10):2504–2510, September 2011. ISSN 02638223. doi: 10.1016/j.compstruct.2011.04.011. URL http://www.sciencedirect.com/science/article/B6TWP-52MJ8WR-3/2/1c040e8a764abfe5ba437c2e003a9cedhttp://linkinghub.elsevier.com/retrieve/pii/S0263822311001358.

135.

Shabalin

L. P.

Gorelov

A. V.

Sidorov

I. N.

Khaliulin

V. I.

Dvoyeglazov

I. V.

. Calculation of the parameters of stress-strain and ultimate states of composite foldcores under transverse compression and shear. Mech. Compos. Mater., 48 (4):415–426, September 2012. ISSN 0191–5665. doi: 10.1007/s11029–012–9287–1.

136.

Gattas

Joseph M.

Zhong You . Quasi-Static Impact Response of Alternative Origami-Core Sandwich Panels. In Vol. 6B 37th Mech. Robot. Conf., page V06BT07A032. ASME, August 2013. ISBN 978–0–7918–5594–2. doi: 10.1115/DETC2013–12681. URL http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?doi=10.1115/DETC2013#-12681.

137.

Xiang Zhou Hai Wang Zhong You . Mechanical properties of Miura-based folded cores under quasi-static loads. Thin-Walled Struct., 82:296–310, September 2014. ISSN 02638231. doi: 10.1016/j.tws.2014.05.001. URL http://linkinghub.elsevier.com/retrieve/pii/S0263823114001591.

138.

Sebastian Kilchert Johnson

A.F.

Voggenreiter

. Modelling the impact behaviour of sandwich structures with folded composite cores. Compos. Part A Appl. Sci. Manuf., 57:16–26, February 2014. ISSN 1359835X. doi: 10.1016/j.compositesa. 2013.10.023. URL http://linkinghub.elsevier.com/retrieve/pii/S1359835X13002984.

139.

Baranger

Guidault

P.-A.

Cluzel

Sebastian Fischer . Generation of physical defects for the prediction of the behaviour of folded cores. In Eur. Conf. Comput. Mech. Palais des Congrès, Paris, Fr. May 16–21, 2010, 2010.

140.

Taketoshi Nojima . Development of newly designed ultra-light core structures. JSME Int. J. Ser. A, 49(1): 38–42, 2006. URL http://joi.jlc.jst.go.jp/JST.JSTAGE/jsmea/49.38?from=Google.

141.

Kazuya Saito Taketoshi Nojima . Development of Light-Weight Rigid Core Panels. J. Solid Mech. Mater. Eng., 1 (9):1097–1104, 2007. ISSN 1880–9871. doi: 10.1299/jmmp.1.1097. URL http://joi.jlc.jst.go.jp/JST.JSTAGE/jmmp/1.1097?from=CrossRef.

142.

Kazuya Saito Sergio Pellegrino Taketoshi Nojima . Manufacture of Arbitrary Cross-Section Composite Honeycomb Cores Based on Origami Techniques. J. Mech. Des., 136(5):051011, March 2014. ISSN 1050–0472. doi: 10.1115/1.4026824. URL http://mechanicaldesign.asmedigitalcollection.asme.org/article.aspx?doi=10.1115/1.4026824.

143.

Kazuya Saito Akira Tsukahara Yoji Okabe . Designing of Self-Deploying Origami Models Using Geometrically Misaligned Crease Patterns. In Vol. 5B 38th Mech. Robot. Conf., page V05BT08A053, 2014. ISBN 978–0–7918–4637–7. doi: 10.1115/DETC2014–35592. URL http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?doi=10.1115/DETC2014#-35592.

144.

Niels De Temmerman

Ir. Arch.

Marijke Mollaert Tom Van Mele Lars De Laet . Design and Analysis of a Foldable Mobile Shelter System. Int. J. Sp. Struct., 22(3):161–168, September 2007. ISSN 0266–3511. doi: 10.1260/026635107782218868. URL http://multi-science.metapress.com/openurl.asp?genre=article&id=doi:10.1260/026635107782218868.

145.

Sílvia

Edite Marcelo Calretas

Mário

Say Ming Kong

. Architecture and Paper Structures – Could Paper-Folding Become a Methodology in Architecture? Appl. Mech. Mater., 548–549:1627–1634, 2014. ISSN 1662–7482. doi: 10.4028/www.scientific.net/AMM.548–549.1627. URL http://www.scientific.net/AMM.548#-549.1627.

146.

Engel

Heino

. Structure systems. Dt. Verl.-Anstalt, Stuttgart, 1967.

147.

Hani Buri Gefaltet

Yves Weinand

. TEC21, 8:18–22, 2009.

148.

Hani Buri Ivo Stotz Yves Weinand . Curved Folded Plate Timber Structures. in IABSE-IASS Symp., London, 2011.

149.

Nagy

Rhode-Barbarigos

Adriaenssens

Kilian

. Conceptual design of a single-crease origami-arc inspired movable footbridge structure. Int. J. Sp. Struct., in-press, 2015.

From Folds to Structures,a Review

Abstract

Keywords

Get full access to this article

References