This paper is concerned with the simulation of the unsteady turbulent flow and the aerodynamic tonal noise due to pressure fluctuations on the casing wall. Three-dimensional numerical simulations of the complete unsteady flow on the whole impeller-volute configuration were carried out using computational fluid dynamics (CFD) techniques. Pressure fluctuations on the casing wall were obtained, and the blade passing frequency (BPF) component was extracted to be modeled as the dipole source term of the wave equation. In a companion paper, the pressure fluctuations served as the external excitation to the casing vibration. Multi-domain direct boundary element method (BEM) was used to simulate the noise radiation with two domains representing the interior and exterior fields of the volute respectively, in order to take account of the sound scattering effect by the volute casing. Results showed that the dipole on the volute tongue surface was the most dominant noise source of the fan. Sloping-edge volute tongue was introduced to reduce BPF noise radiation through phase cancellation between the dipole sources over the volute tongue.
AyerA.AmbsR.ChristophC.SchillemeitB. and MatthesM., Prediction of flow-induced noise in automotive HVAC systems using a combined CFD/CA approach, SAE transactions, 2005, 114, 550–564.
2.
Ballesteros-TajaduraR.Velarde-SuárezS. and Hurtado-CruzJ.P., Noise prediction of a centrifugal fan: Numerical results and experimental validation, ASME Journal of Fluid Engineering, 2008, 130, 091102–1–091102–12.
3.
Ballesteros-TajaduraR.Velarde-SuárezS.Hurtado-CruzJ.P. and Santolaria-MorrosC., Numerical calculation of pressure fluctuations in the volute of a centrifugal fan, ASME Journal of Fluid Engineering, 2006, 128, 259–369.
4.
BleierF.P., Fan handbook: selection, application, and design, McGraw-Hill, 1998.
5.
BrentnerK.S. and FarassatF., Analytical comparison of the acoustic analogy and Kirchhoff formulation for moving surfaces, AIAA Journal, 1998, 36, 1379–1386
6.
CaiJ.C.QiD.T. and LuF.A., Investigation of fan casing aerodynamic noise at the blade passing frequency, Proceedings of ASME Fluids Engineering Division Summer Meeting, Vail, Colorado, USA, 2009.
7.
DongR.ChuS. and KatzJ., Effect of modification to tongue and impeller geometry on unsteady flow, pressure fluctuations, and noise in a centrifugal pump, ASME Journal of Turbomachinery, 1997, 119, 506–515.
8.
EmbletonT.F.W., Experimental study of noise reduction in centrifugal blowers, Journal of the Acoustical Society of America, 1963, 35, 700–705.
9.
JeonW.H., A numerical study on the effects of design parameters on the performance and noise of a centrifugal fan, Journal of Sound and Vibration, 2003, 265, 221–230.
10.
KhelladiS.KouidriS.BakirF. and ReyR., Flow study in the impeller-diffuser interface of a vaned centrifugal fan, ASME Journal of Fluid Engineering, 2005, 127, 495–502.
11.
LiuQ.QiD. and TangH., Computation of aerodynamic noise of centrifugal fan using large eddy simulation approach, acoustic analogy, and vortex sound theory, Proc. IMechE Part C: J. Mechanical Engineering Science, 2007, 221, 1321–1332.
12.
LyonsL.A. and PlatterS., Effect of cutoff configuration on pure tones generated by small centrifugal blowers, Journal of the Acoustical Society of America, 1963, 35, 1455–1456.
13.
LyrintzisA.S., Surface integral methods in computational aeroacoustics-From the (CFD) near-field to the (Acoustic) far-field, International Journal of Aeroacoustics, 2003, 2, 95–128.
14.
MajidiK., Numerical study of unsteady flow in a centrifugal pump, ASME Journal of Turbomachinery, 2005, 127, 363–371.
15.
MarburgS., Six boundary elements per wavelength: Is that enough?, Journal of Computational Acoustics, 2002, 10, 25–51.
16.
MeakhailT. and ParkS.O., A study of impeller-diffuser-volute interaction in a centrifugal fan, ASME Journal of Turbomachinery, 2005, 127, 84–90.
17.
NeiseW., Noise reduction in centrifugal fans: A literature survey, Journal of Sound and Vibration, 1976, 45, 375–403.
18.
NeiseW., Review of fan noise generation mechanisms and control methods, Proceedings of Fan Noise 1992 International Symposium, Senlis, France, 1992.
19.
QiD.MaoY.LiuX. and YuanM., Experimental study on the noise reduction of an industrial forward-curved blades centrifugal fan, Applied Acoustics, 2009, 70, 1041–1050.
20.
ReeseH.CarolusT. and KatoC., Numerical prediction of the aeroacoustic sound sources in a low pressure axial fan with inflow distortion, Proceedings of the Fan Noise 2007 International Symposium, Senlis, France, 2007.
21.
TournourM.El-HachemiZ.ReadA.MendocaF.BaroneF. and DurelloP., Investigation of the tonal noise radiated by subsonic fans using the aeroacoustic analogy, Proceedings of the Fan Noise 2003 International Symposium, Senlis, France, 2003.
22.
Velarde-SuárezS.Ballesteros-TajaduraR.Hurtado-CruzJ.P. and Santolaria-MorrosC., Experimental determination of the tonal noise sources in a centrifugal fan, Journal of Sound and Vibration, 2006, 295, 781–796.
23.
Velarde-SuárezS.Ballesteros-TajaduraR.Santolaria-MorrosC. and Pereiras-GarcíaB., Reduction of the aerodynamic tonal noise of a forward-curved centrifugal fan by modification of the volute tongue geometry, Applied Acoustics, 2008, 69, 225–232.
24.
WangM.FreundJ.B. and LeleS.K., Computational prediction of flow-generated sound, Annual Review of Fluid Mechanics, 2006, 38, 483–512.
25.
YouniM.BakirF.KouidriS. and ReyR., Numerical and experimental study of unsteady flow in a centrifugal fan, Proc. IMechE Part A: Journal of Power and Energy, 2007, 221, 1025–1036.
26.
XuC. and MüllerM., Development and design of a centrifugal compressor volute, International Journal of Rotating Machinery, 2005, 3, 190–196.
