The present paper reports the correlation between the predicted performance and experimental data obtained from a hydrostatic thrust bearing under conditions designed to produce phase change due to viscous dissipation within the lubricant. The predicted values of pressure distribution indicate that the best correlation is obtained when the viscosity of a two-phase mixture is assumed to be the volume average of the viscosity of the individual phases.
OrcuttF. K.An investigation of the operation and failure of mechanical face seals. Trans. ASME, J. Lubric. Technol, 1969, 91(4), 713–725.
2.
HughesW. H.WinowichW. S.BirchakM. J.KennedyW. C.Phase change in liquid face seals. Trans. ASME, J. Lubric. Technol., 1978, 100, 75–81.
3.
HughesW. F.ChaoN. H.Phase change in liquid face seals II—isothermal and adiabatic bounds with real fluids. Trans. ASME, J. Lubric. Technol., 1980, 102, 351–359.
4.
BeattyP. A.HughesW. F.Turbulent two-phase flow in shaft face seals. Trans. ASME, J. Tribology, 1987, 109, 91–99.
5.
YasunaJ. A.HughesW. F.A continuous boiling model for face seals. Trans. ASME, J. Tribology, 1990, 112, 267–274.
6.
CameronA.Principles of lubrication, 1966, Longmans, London).
7.
ConstantinescuV. N.Theory of lubrication. Proceedings of International Conference on Lubrication and wear, Houston, 1963MusterD.SternlichtB.), 1965, p. 161.
