This paper describes an investigation into the dynamic characteristics of a rolling mill. Those characteristics representing limitations, to both productivity and gauge accuracy, are clearly identified with reference to results from a recently installed rolling mill. A linearized mathematical model is developed that conceptually describes these limitations. This model highlights the significance of gauge tension interactions, the second natural frequency of the mill stack dynamic system and the first natural frequency of the entry coil dynamic system.
TlustyJ.CandraG.CritchleyS.PatonD.Chatter in cold rolling. Ann. CIRP, 1982, 31(1), 195–199.
2.
TamiyaT.FuruiK.IidaH.Analysis of chattering phenomenon in cold rolling. Proceedings of the International Conference on Steel rolling, Tokyo, Japan, 1980, Vol. 97, Nos 7–9, pp. 1191–1207 (The Iron and Steel Institute of Japan).
3.
RobertsW. L.Third-octave mode chatter in the cold rolling of light gauge strip. Proceedings of the International Conference on Steel rolling, Tokyo, Japan, 1980, Vol. 99, Nos 7–11, pp. 1215–1224 (The Iron and Steel Institute of Japan).
4.
YaritaI.FukawaK.SeinoY.TakimotoT.NakazatoY.NakagawaK.An analysis of cold rolling for ultrathin gauge steel mill. Trans. Iron and Steel Inst. Japan, 1978, 18(1), 1–10.
5.
ChefneuxL.FischbechJ.GouzouJ.Study and industrial control of chatter in cold rolling. In Iron and steel engineer, November 1984, pp. 17–26 (Association of Iron and Steel Engineers, Pittsburgh, Pennsylvania).
6.
PatonD. L.CritchleyS.Tandem mill vibration: Its cause and control. In Iron and steel engineer, March 1985, pp. 37–43 (Association of Iron and Steel Engineers, Pittsburgh, Pennsylvania).
7.
GinzbergV. B.Gauge control, 1991, United Engineering, Pittsburgh, Pennsylvania).
8.
HardwickB.Solving chatter problems for the strip metals industry. In Aluminium today, September 1994, pp. 23–24 (FMJ International Publications, Redhill, Surrey).
9.
FapianoD. J.SteeperD. E.Thickness control in cold rolling. In Iron and steel engineer, November 1983, pp. 21–31 (Association of Iron and Steel Engineers, Pittsburgh, Pennsylvania).
10.
EvansP. R.Aluminium rolling mill gauge control. PhD project—transfer report, The University of Bath, School of Mechanical Engineering, January 1995.
11.
EvansP. R.Commissioning report R259. Davy International, June 1994 (Confidential).
12.
HessenbergW. C.SimsR. B.Principles of continuous gauge control in sheet and strip rolling. Proc. Instn Mech. Engrs, 1952, 166, 75–85.
13.
HessenbergW. C.SimsR. B.The effect of tension in cold strip rolling. J. Iron and Steel Engr, 1951, 168, 155–164.
14.
MerritH. E.Hydraulic control systems, 1967, John Wiley, New York).
15.
StarlingC. W.The theory and practice of flat rolling, 1962, University of London Press, London).
16.
RobertsW. L.Cold rolling of steel, 1978, Marcel Dekker, New York).
17.
BlandD. R.FordH.The calculation of roll force and torque in cold strip rolling with tensions. Proc. Instn Mech. Engrs, 1948, 159, 144–153.
