An approach is developed utilizing measurements of transient pressure and flowrate at the inlet and outlet of the line. A time series analysis technique is used in such a way that the number of unknown coefficients to be estimated is minimized. Accurate predictions are shown for three different line configurations and a range of operating conditions. The evaluation of just two transmission line functions then allows a simple model structure to be used for the simulation of fluid power circuits incorporating long lines.
EdgeK. A.JohnstonD. N.A new method for evaluating the fluid borne noise characteristics of positive displacement pumps. Proceedings of Seventh BHRA Fluid Power Symposium, Bath, 1986, pp. 253–260.
2.
JohnstonD. N.EdgeK. A.Simulation of the pressure ripple characteristics of hydraulic circuits. Proc. Instn Mech. Engrs, Part C., 1989, 203(C4), 275–282.
3.
LongmoreD. K.SchlesingerA.Transmission of vibration and pressure fluctuations through hydraulic hoses. Proc. Instn Mech. Engrs, Part I, 1991, 205(I2), 97–104.
4.
KitsiosE. E.BoucherR. F.Transmission line modelling of a hydraulic position control system. Proc. Instn Mech. Engrs, Part B, 1986, 200(B4), 229–236.
5.
BurtonJ. D.EdgeK. A.BurrowsC. R.Analysis of an electro-hydraulic position control servo-system using transmission line modelling. Proceedings of Second JHPS Fluid Power Symposium, Tokyo, 1993, pp. 507–514.
6.
BurtonJ. D.EdgeK. A.BorrowsC. R.Modelling requirements for the parallel simulation of hydraulic systems. Trans. ASME, J. Dynamic Systems, Measurement and Control, March 1994, 116, 137–145.
7.
WattonJ.The stability of electrohydraulic servomotor systems with transmission lines and non-linear motor friction effects. Part A, system modelling. J. Fluid Control, 1986, 16, 118–136.
8.
WattonJ.The stability of electrohydraulic servomotor systems with transmission lines and non-linear motor friction effects. Part B, system stability. J. Fluid Control, 1986, 16, 137–151.
9.
HsueC. Y.HullenderO. A.Modal approximations for the fluid dynamics of hydraulic and pneumatic transmission lines. In Fluid transmission line dynamics, 1983, pp. 51–77 (American Society of Mechanical Engineers, New York).
10.
WattonJ.Modelling of electrohydraulic systems with transmission lines using modal approximations. Proc. Instn Mech. Engrs, Part B, 1988, 202(B3), 153–163.
11.
WattonJ.TadmoriM. J.A comparison of techniques for the analysis of transmission line dynamics in electrohydraulic control systems. Appl. Math. Modelling, October 1988, 12, 457–466.
12.
SanadaK.RichardsC. W.LongmoreD. K.JohnstonD. N.A finite element model of hydraulic pipelines using an optimised interlacing grid system. Proc. Instn Mech. Engrs, Part I, 1993, 207(I4), 213–222.
13.
KrusP.WeddfeltK.PalmbergJ. O.Fast pipeline models for simulation of hydraulic systems. Trans. ASME, J. Dynamic Systems, Measurement and Control, March 1994, 115, 132–136.
14.
WattonJ.Fluid power systems, 1989, Prentice-Hall, Englewood Cliffs, New Jersey).
15.
WattonJ.XueY.A new direct-measurement method for determining fluid bulk modulus in oil hydraulic systems. Proc. FLUCOME '94, Toulouse, France, August 1994, pp. 543–548.
16.
WattonJ.XueY.Identification of fluid power component behaviour using dynamic flowrate measurement. Proc. Instn Mech. Engrs, Part C., 1995, 209(C3), 179–191.
17.
Senso control data sheet on the SCQ flowmeter, Parker Hannifin plc, Wetherby Road, Derby DE2 8JH, UK.
