Abstract
By introducing physically motivated time delays, simulation models can be partitioned into decoupled independent sub-models. This enables parallel simulations on multi-core processors. An automatic algorithm is used for partitioning and running distributed system simulations. Methods for sorting and distributing components for good load balancing have been developed. Mathematical correctness during simulation is maintained by a busy-waiting thread synchronization algorithm. Independence between sub-models is achieved by using the transmission line element method. In contrast to the more commonly used centralized solvers, this method uses distributed solvers with physically motivated time delays, making simulations inherently parallel. Results show that simulation speed increases almost proportionally to the number of processor cores in the case of large models. However, overhead time costs mean that models need to be over a certain size to benefit from parallelization.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
