Cushion knee prostheses have been designed and constructed that produce approximately equal initial contact areas and theoretical film thicknesses compared with a conventional UHMWPE (ultra-high molecular weight polyethylene) joint. These compliant bearings had a flat tibial component which imposed fewer biomechanical constraints and allowed a greater range of movement. Friction experiments have been carried out on a pendulum simulator apparatus. The results showed that the cushion knee joints operated just within the mixed lubrication regime, but that they benefited from a substantial measure of fluid film lubrication. Microelastohydrodynamic lubrication was effective in preserving low friction and thin but effective lubricating films.
DowsonD.Are our joint replacements adequate? IMechE International Conference on The changing role of engineering in orthopaedics, 14–15 April 1989, Paper C384/KN1, pp. 1–5 (Mechanical Engineering Publications, London).
2.
UnsworthA.The effects of lubrication in hip joint prostheses. Phys. M Biol., 1978, 23, 253–268.
3.
MathiesenE. B.LindgrenJ. U.ReinholtF. P.SudmannE.Tissue reactions to wear products from polyacetal (Delrin) and UHMW polyethylene in total hip replacement. J. Biom Mater. Res., 1987, 21, 459–466.
4.
MurrayD. W.RushtonN.Macrophages stimulate bone resorption when they phagocytose particles. J. Bone Jt Surg., 1991, 72-B, 988–992.
5.
LivermoreJ.IlstrupD.MorreyB.The effect of femoral head size on wear of polyethylene acetabular components. J. Bone Jt Surg., 1990, 72-A, 518–528.
6.
UnsworthA.PearcyM. J.WhiteE. F. T.WhiteG.Soft layer lubrication of artificial hip joints. IMechE Conference on Tribology—friction, lubrication and wear, 50 years on, 1987, paper C219/87, pp. 715–724 (Mechanical Engineering Publications, London).
7.
DowsonD.FisherJ.JinZ.M.AugerD. D.JobbinsB.Design considerations for cushion form bearings in artificial hip joints. Proc. Intn Mech. Engrs, Part H, 1991, 205(H1), 59–68.
8.
AugerD. D.DowsonD.FisherJ.JinZ.M.Friction and lubrication in cushion form bearings for artificial hip joints. Proc. Instn Mech. Engrs, Part H, 1993, 207(H1), 25–33.
9.
MurakamiT.OhtsukiN.Lubricating film formation in knee prostheses under walking conditions. In Fluid film lubrication—Osborne Reynolds Centenary, Tribology Series (Eds DowsonD.TaylorC. M.GodetM.BertheD.), 1987, pp. 375–386 (Elsevier, Amsterdam).
10.
FisherJ.DowsonD.Tribology of total artificial joints. Proc. Instn Mech. Engrs, Part H, 1991, 205(H2), 73–79.
11.
EndohH.SeedhomB. B.TakedaT.Mobility, stability and stress in artificial knees. Engng in Medicine1978, 7(2), 93–100.
12.
WalkerP. S.GargA.Range of motion in total knee arthroplasty. Clin. Orthop. Related Res., 1991, 262, 227–237.
13.
ScottW. N.RubensteinM. P.Total-condylar arthroplasty: indications. In Total-condylar knee arthroplasty. Technique, results and complications (RanawatC. S.), 1985, pp. 17–23 (Springer-Verlag, New York).
14.
AugerD. D.DowsonD.FisherJ.Friction of cylindrical cushion form bearings for artificial hip joints—a comparison of theory and experiment. In Thin films in tribology, Tribology Series (Eds DowsonD.TaylorC. M.GodetM.), 1993, pp. 683–692 (Elsevier, Amsterdam).
15.
MurrayM. P.DroughtA. B.KoryR. C.Walking patterns of normal men. J. Bone Jt Surg., 1964, 46-A, 335–360.
16.
MorrisonJ. B.Mechanics of the knee joint in relation to normal walking. J. Biomechanics, 1970, 3, 51–61.
17.
MeijersP.The contact problem of a rigid cylinder on an elastic layer. Appl. Sci. Res., 1968, 18, 353–383.
18.
HamrockB. J.DowsonD.Elastohydrodynamic lubrication of elliptical contacts for materials of low elastic modulus. Trans. ASME, J. Lubric. Technol., 1978, 100, 236–245.
19.
DowsonD.UnsworthA.CookeA. F.GvozdanovicD.Lubrication of joints. Chapter 13. In An introduction to the biomechanics of joints and joint replacements (Eds DowsonD.WrightV.), 1981, Ch. 13, pp. 120–145 (Mechanical Engineering Publications, London).
20.
MedleyJ. B.DowsonD.WrightV.Transient elastohydrodynamic lubrication models for the human ankle joint. Engng in Medicine, 1984, 13, 137–151.
21.
HookeC. J.The elastohydrodynamic lubrication of a cylinder on an elastomeric layer. Wear, 1986, 111, 83–100.
22.
JinZ. M.DowsonD.FisherJ.Fluid film lubrication in natural hip joints. In Thin films in tribology, Tribology Series (Eds DowsonD.TaylorC. M.GodetM.), 1993, pp. 545–555 (Elsevier, Amsterdam).
23.
SmithT. J.MedleyJ. B.Development of transient elastohydrodynamic models for synovial joints lubrication. In Fluid film lubrication—Osborne Reynolds Centenary, Tribology Series (Eds DowsonD.TaylorC. M.GodetM.BertheD.), 1987 (Elsevier, Amsterdam).
24.
JohnsonK. L.GreenwoodJ. A.PoonS. Y.A simple theory of asperity contact in elastohydrodynamic lubrication. Wear, 1972, 19, 91–108.
25.
MedleyJ. B.StrongA. B.PilliarR. M.WongE. W.The breakdown of fluid film lubrication in elastic-isoviscous point contacts. Wear, 1980, 63, 25–40.
26.
CookeA. F.DowsonD.WrightV.The rheology of synovial fluid and some potential synthetic lubricants for degenerate synovial joints. Engng in Medicine, 1978, 7(2), 66–72.
27.
CaraviaL.DowsonD.FisherJ.Start-up and steady state friction of thin polyurethane layers. Wear, 1993, 160, 191–197.
