Sage Journals: Discover world-class research

Abstract

All but the simplest of single degree of freedom mechanisms have a relatively large number of component parts. To analyse the motion of such systems, therefore, one parameter is rarely sufficient. For an adequate description of the motion characteristics of all components, a number of additional coordinates are needed.

This paper introduces a clear and logical notation which facilitates the setting up of the required number of constraint equations by simple inspection of clear line diagrams of the mechanism to be analysed. These constraint equations are eminently suitable for the calculation of velocities and accelerations by direct differentiation. The resulting equations are linear in the velocities and accelerations of all component parts. A method based on this approach is presented and applied to a selection of widely different examples.

Keywords

kinematic analysis constraint equations plane mechanisms direct differentiation

Get full access to this article

View all access options for this article.

References

IFToMM Commission ‘A’ for Standards and Terminology Terminology for the theory of machines and mechanisms. Mech. Mach. Theory, 1991, 26(5).

Doughty

Mechanics of machines, 1987 (John Wiley, New York).

Fogarasy

A. A.

Smith

M. R.

A new simplified approach to the kinematic analysis and design of epicyclic gearboxes. Proc. Instn Mech. Engrs, Part C, 1995, 209(C1), 49–53.

Fogarasy

A. A.

Smith

M. R.

A unified tensor approach to the analysis of mechanical systems. Submitted to Proc. R. Soc., September 1994.

Erdman

G. E.

Sandor

G. N.

Mechanism design, Vol. 1, 1984 (Prentice-Hall, Englewood Cliffs, New Jersey).

Mabie

H. H.

Reinholtz

C. F.

Mechanisms and dynamics of machinery, 4th edition, 1987 (John Wiley, New York).

Martin

G. H.

Kinematics and dynamics of machinery, 1969 (McGraw-Hill, Tokyo).

Nikravesh

P. E.

Computer-aided analysis of mechanical systems, 1988 (Prentice-Hall, Englewood Cliffs, New Jersey).

Norton

R. L.

Design of machinery, 1992 (McGraw-Hill, New York).

10.

Shigley

J. E.

Uicker

J. J.

Theory of machines and mechanisms, 1980 (McGraw-Hill, Kogakusha, Tokyo).

11.

Wilson

C. E.

Sadler

J. P.

Kinematics and dynamics of machinery, 1993 (Harper Collins, New York).

The Case for a General Method of Kinematic Analysis of Plane Mechanisms Based on Equations of Constraint

Abstract

Keywords

Get full access to this article

References