Thermodynamic analysis of the Stirling heat engine with regenerative losses and internal irreversibilities

Abstract

A model of an irreversible cycle of the Stirling heat engine, using air as the working substance, has been established. Several irreversibilities due to the non-adiabatic regenerator dead volumes of hot space, cold space, and regenerator that the regenerator effective temperature is an arithmetic mean of the heater and cooler temperature. In addition, the general irreversibilities of the non-quasistatic cycle are taken into account. Numerical simulation is performed and the effects of the regenerator effectiveness and dead volumes are studied. Some fundamental optimal relations and general performance characteristic curves of the cycle are obtained. The results from this study indicate that the engine net work is affected by the cycle irreversibilities, while the heat input and engine efficiency are affected by both the regenerator effectiveness and dead volumes. It is concluded that the system operating temperature and the overall system efficiency depend on the internal irreversibility of the heat engine.

Keywords

Stirling engine thermodynamic analysis internal irreversibility regenerator effectiveness losses thermal efficiency

Get full access to this article

View all access options for this article.

References

Bancha

Somchai

A review of solar-powered Stirling engines and low temperature differential Stirling engines

Renew. Sustain. Energ. Rev., 2003, 7, 131–154.

Kolin

Stirling motor: history-theory-practice, 1991 (Zagreb University Publications, Dubrovnik).

Jin

Wang

J. Chen.

Influence of several irreversible losses on the performance of a ferro-electric Stirling refrigeration-cycle

Appl. Energ., 2002, 72, 495–511.

Martaj

Grosu

Exergetical analysis and design optimisation of the Stirling engine

Int. J. Exergy, 2006, 3(1), 45–66.

Popescu

Radcenco

Costea

Feidt

Optimisation thermodynamique en temps fini du moteur de Stirling endo- et exo-irréversible

Rev. Gén. Therm., 1996, 35, 656–661.

Berchowitz

D. M.

Urieli

Stirling cycle engine analysis, 1984 (Adam Hilger Ltd, Bristol).

Ataer

O. E.

Numerical analysis of regenerators of piston type Stirling engines using Lagrangian formulation

Int. J. Refrig., 2002, 25, 640–652.

Walker

Stirling engines, 1980 (Clarendon Press, Oxford).

Chen

Sun

Optimum performance of irreversible Stirling engine with imperfect regeneration

Energ. Convers. Mgmt, 1998, 39, 727–732.

10.

Angelino

Invernizzi

Potential performance of real gas Stirling cycle heat pumps

Int. J. Refrig., 1996, 19(6), 390–399.

11.

Kaushik

S. C.

Kumar

Finite time thermodynamic evaluation of irreversible Ericsson and Stirling heat engines

Energ. Convers. Mgmt, 2001, 42, 295–312.

12.

James

R. S.

Ringbom Stirling engines, 1985 (Oxford University Press, New York).

13.

Tlili

Modélisation des moteurs Stirling. DEA thesis, Ecole National d'Ingénieurs de Monastir, Tunisia, 2002.

14.

Timoumi

Ben Nasrallah

Design and fabrication of a Stirling-Ringbom engine running at a low temperature. In TSS International Conference on Advances in mechanical engineering ICAME, Hammamet, Tunisia, March 2002.

15.

Ataer

O. E.

Karabulut

Thermodynamic analysis of the V-type Stirling-cycle refrigerator

Int. J. Refrig., 2005, 28, 183–189.

16.

Salah El-Din

M. M.

Second law analysis of irreversible heat engines with variable temperature heat reservoirs

Energ. Convers. Mgmt, 2001, 42(2), 189–200.

17.

Jincan

Minimum power input of irreversible Stirling refrigerator for given cooling rate

Energ. Convers. Mgmt, 1998, 39(12), 1255–1263.

18.

Tlili

Timoumi

Numerical simulation and losses analysis in a Stirling engine. Int. J. Heat Technol., accepted 2005.

19.

Rogdakis

E. D.

Bormpilas

N. A.

Koniakos

I. K.

A thermodynamic study for the optimization of stable operation of free piston Stirling engines

Energ. Convers. Mgmt, 2004, 45, 575–593.