Laser Doppler velocimetry measurements of flow within the cylinder of a motored tow-stroke cycle engine-comparison with some computational fluid dynamics predictions

Abstract

This study was carried out to assess the ability of a computational fluid dynamics (CFD) code to predict the scavenging flow in the cylinder of a two-stroke cycle engine. Predictions were obtained from a CFD simulation of the flow within the cylinder. Due to the apparent sym-metry of the engine port layout, only half of the cylinder volume was modelled. Boundary conditions for the CFD model were obtained from experimentally measured pressure-time histories in the crankcase and exhaust. The two-stroke cycle engine was modified to allow laser Doppler velocimetry (LDV) measurements to be made of the in-cylinder flow. The engine was operated under motoring conditions at 500 r/min with a delivery ratio of 0.7. Although the engine scavenge port layout was geometrically symmetrical, an asymmetrical flow field was identified in the cylinder. As a result of this, a direct comparison of the in-cylinder LDV measured and CFD computed results was not possible. However, LDV and CFD results for the in-cylinder flow are presented to help highlight the dissimilarity between the measured and predicted flow fields. Two-dimensional LDV measurements were made in the cylinder at the transfer ports for a portion of the cycle. A comparison of these LDV measurements with CFD predictions of the in-cylinder velocities at the same locations showed that the CFD model could replicate reasonably well the general trend of the flow. The measured cylinder averaged turbulent kinetic energy was compared with that of the CFD model. The qualitative trend of the overall turbulence generating capacity of the engine was well replicated by the CFD model.

Keywords

two-stroke cycle engine scavenging LDV CFD turbulence

Get full access to this article

View all access options for this article.

References

Yakhot

Orszag

S. A.

Renormalisation group analysis of turbulence-1: Basic theory

J. Scient. Computing, 1986, 1, 1–51.

Rizk

Experimental studies of the mixing processes and flow configurations in two-cycle engine scavenging

Proc. Instn Mech. Engrs, 1954, 172.

Jante

Scavenging and other problems of two-stroke cycle spark-ignition engines. SAE Paper 680468, 1968.

Raghunathan

B. D.

Kenny

R. G.

CFD simulation and validation of the flow within a motored two-stroke engine. SAE Paper 970359, 1997.

Abraham

Magi

Computations of transient jets: RNG k-ε model versus standard k-ε model. SAE Paper 970885, 1997.

Yianneskis

Foster

D. P. E.

Ganti

A numerical investigation of the effect of inlet charge direction on the scavenging behaviour of a two-stroke engine. In IMechE 3rd International Conference on Computers in Reciprocating Engines and Gas Turbines, January 1996, London, Paper C499/056/96, pp. 269–280.

Campbell

Pollock

A simulation model for direct-fuel-injection of two-stroke gasoline engines. SAE Paper 970366, 1997.

Mendonca

F. G.

Shah

Glynn

D. R.

Modelling of in-cylinder aerodynamics using a body-fitted moving grid. CHAM Internal Report, 1991.

Sweeney

M. E. G.

Swann

G. B. G.

Kenny

R. G.

Blair

G. P.

Computational fluid dynamics applied to two-stroke engine scavenging. SAE Paper 851519, 1985.

10.

Chen

Ganti

Lee

K. C.

Yianneskis

A comparison of CFD predictions and LDA measurements of the flow through a generic inlet port In Engineering Systems Design and Analysis, PD-Vol. 64-8.1, Vol. 8, Part A, 1994 (American Society of Mechanical Engineers, New York).

11.

Versteeg

H. K.

Malalasekera

An Introduction to Computational Fluid Dynamics—The Finite Volume Method, 1995 (Longman Scientific and Technical, London).

12.

Creaven

J. P.

Kenny

R. G.

Fleck

Cunningham

A computational and experimental study of the scavenging flow in the transfer duct of a motored two-stroke cycle engine

Proc. Instn Mech. Engrs, Part D: J. Automobile Engineering, 2001, 215 (D9), 1017–1031.

13.

Creaven

J. P.

Modelling and evaluation of two-stroke engine scavenging. PhD Thesis, Department of Mechanical Engineering, The Queen's University of Belfast, 1998.

14.

SAE J604d Engine Terminology and Nomenclature, June 1979 (Society of Automotive Engineers, Warrendale, Pennsylvania).

15.

BS 1042:1981 Methods for the Measurement of Fluid Flow in Closed Conduits, 1981 (British Standards Institution, London).

16.

Durst

Melling

Whitelaw

J. H.

Principles and Practice of Laser Doppler Anemometry, 2nd edition, 1981 (Academic Press, New York).

17.

Bendat

J. S.

Piersol

A. G.

Random Data: Analysis and Measurement Procedures, 1971 (Wiley Interscience, New York).

18.

Raghunathan

B. D.

Two-stroke engine in-cylinder and duct flows. PhD Thesis, Department of Mechanical Engineering, The Queen's University of Belfast, 1996.

19.

Arcoumanis

Whitelaw

J. H.

Fluid mechanics of internal combustion engines-a review

Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 1987, 201 (C1), 57–74.

20.

Rask

R. B.

Laser Doppler anemometer measurements of mean velocity and turbulence in internal combustion engines. In International Conference on Applications of Lasers and Electro-Optics, Boston, 12–15 November 1984.

21.

Fansler

T. D.

French

D. T.

Cycle-resolved laser-velocimetry measurements in a reentrant-bowl-in-piston engine. SAE Paper 880377, 1988.

22.

Spalding

D. B.

A general purpose computer program for multidimensional one- and two-phase flow

Mathematics and Computers in Simulation, 1981, 23, 267–276.

23.

Kenny

R. G.

Scavenging flow in small two-stroke cycle engines. PhD Thesis, Department of Mechanical Engineering, The Queen's University of Belfast, 1980.

24.

Sanborn

D. S.

Blair

G. P.

Kenny

R. G.

Kingsbury

A. H.

Experimental assessment of scavenging efficiency of two-stroke cycle engines. SAE Paper 800975, 1980.

25.

Ekenberg

Johansson

The effect of transfer port geometry on scavenge flow velocities at high speed. SAE Paper 960366, 1996.

26.

Amsden

A. A.

O'Rourke

P. J.

Butler

T. D.

KIVA-3: a block-structured-mesh KIVA program for complex geometries. Los Alamos National Laboratory Report LA-12503-MS, 1992.

27.

Launder

B. E.

Spalding

D. B.

The numerical computation of turbulent flow

Computer Meth. Appl. Mechanics and Engng, 1974, 3, 269–289.

28.

Fansler

T. D.

French

D. T.

The scavenging flow field in a crankcase-compression two-stroke engine-a three-dimensional laser-velocimetry survey. SAE Paper 920417, 1992.

29.

Köthe

Der Einflü unsymmetrrischer Spülung auf das Betriebsverhalten von kurbelkammergespülten Zweitakt-Ottomotoren

Kraftahrzeugtechnik, 1965, 1, 3.

30.

Haworth

D. C.

Huebler

M. S.

El Tahry

S. H.

Matthes

W. R.

Multidimensional calculations for a two-cycle engine: a detailed scavenging model validation. SAE Paper 932712, 1993.

31.

McKinley

N. R.

Kenny

R. G.

Fleck

CFD prediction of a two-stroke, in-cylinder steady flow field-an experimental validation. SAE Paper 940399, 1994.

32.

Star-CD 3.0 Manuals, 1997 (Computational Dynamics Limited).

33.

Investigation of gas exchange processes in the ports and cylinder of two-stroke engines. PhD Thesis, Department of Mechanical Engineering, King's College London, University of London, 1999.

34.

Ahmadi-Befrui

Brandstatter

Kratochwill

Multidimensional calculation of the flow processes in a loop-scavenged two-stroke cycle engine. SAE Paper 890841, 1989.

35.

Ghandhi

J. B.

Martin

J. K.

Velocity field characteristics in motored two-stroke ported engines. SAE Paper 920419, 1992.

36.

Amsden

A. A.

O'Rourke

P. J.

Butler

T. D.

Meintjes

Fansler

T. D.

Comparisons of computed and measured three-dimensional velocity fields in a motored two-stroke engine. SAE Paper 920418, 1992.

37.

Star-CD 2.21 Manuals, 1994 (Computational Dynamics Limited).

38.

Smyth

J. G.

Kenny

R. G.

Blair

G. P.

Motored and steady flow boundary conditions applied to the prediction of scavenging flow in a loop scavenged two-stroke cycle engine. SAE Paper 900800, 1990.