The design and control of an actively constrained revolute joint with backlash cancellation for passively deployed devices is presented in this paper. The drive mechanism consists of two motor-driven worms coupled to a single worm wheel. A mathematical model of the system is used in order to develop a backlash cancellation strategy and computed-torque motion control algorithm. Experimental results show that the position of the joint can be successfully controlled to track a trajectory generated from a user-input force command signal while cancelling backlash at the gear interface.
TaylorR. H.MittelstadtB. D.An image-directed robotic system for precise orthopaedic surgeryIEEE Trans. Robotics and Automn, 1994, 10 (3), 261–274.
2.
KazanzidesP.MittelstadtB. D.An integrated system for cementless hip replacementIEEE Engng in Medicine and Biol., 1995, 14 (3), 307–313.
3.
DaviesB. L.A discussion of safety issues for medical robots In Computer-Integrated Surgery (Eds TaylorR. H.LavalléeS.BurdeaG. C.MösgesR.S.), 1996, pp. 287–296 (MIT Press, Cambridge, Massachusetts).
4.
SainsburyJ. K.JrThe heart of microsurgeryMech. Engng, December 1998.
5.
HarrisS. J.LinW. J.FanK. L.HibberdR. D.CobbJ.DaviesB. L.Experiences with robotic systems for knee surgeryLecture Notes in Computer Sci., 1997, 1205, 757–766.
6.
DelnondedieuY.TroccazJ.PADyC: A Passive Arm with Dynamic Constraints. A prototype with two degrees of freedom. In Proceedings of 2nd Annual International Symposium on Medical Robotics and Computer Assisted Surgery, Baltimore, Maryland, 4-7 November 1995.
7.
TroccazJ.DelnondedieuY.Semi-active guiding systems in surgery. A two-dof prototype of the Passive Arm with Dynamic Constraints (PADyC)Mechatronics, 1996, 6 (4), 399–421.
8.
PattonW. J.Mechanical Power Transmission, 1980 (Prentice-Hall, Englewood Cliffs, New Jersey).
9.
BoL. C.PavelescuD.The friction-speed relationship and its influence on the critical velocity of stick-slip motionWear, 1982, 82, 277–289.
10.
Armstrong-HélouvryB.DupontP.De WitCanudas C.A survey of models, analysis tools and compensation methods for the control of machines with frictionAutomatica, 1994, 30 (7), 1083–1138.
