Indents perturb the pressure and stress distribution and increase the failure risk. Existing theory for roughness deformation is extended to pure-rolling elastohydrodynamic lubrication indented contact pressure perturbations. First, a study of shallow indents is proposed, then it is modified to account for non-linear behavior of deeper indents.
LubrechtA. A.Dwyer-JoyceR. S.IoannidesE.Analysis of the influence of indentations on contact life. In Proceedings of the 19th Leeds—Lyon Symposium on Tribology, 1992, pp. 173–181.
2.
AiX.ChengH. S.The influence of moving dent on point EHL contacts. STLE Tribol. Trans., 1996, 37, 323–335.
3.
AiX.LeeS. C.Effect of slide-to-roll ratio on interior stresses around a dent in EHL contacts. STLE Tribol. Trans., 1996, 39, 881–889.
4.
AiX.NixonH. P.Fatigue life reduction of roller bearings due to debris denting. Part I — theoretical modeling. STLE Tribol. Trans., 2000, 43, 197–204.
5.
AiX.NixonH. P.Fatigue life reduction of roller bearings due to debris denting. Part II — experimental validation. STLE Tribol. Trans., 2000, 43, 311–317.
6.
CoulonS.Pŕediction de la duŕee de vie des contacts ponctuels lubrifíes en pŕesence d'indentations. PhD Thesis: INSA-LYON, Lyon, France, 2001.
7.
CoulonS.VilleF.LubrechtA. A.An abacus for predicting the rolling contact fatigue life reduction due to debris dents. In Proceedings of the 28th Leeds—Lyon Symposium on Tribology, 2002, pp. 283–294.
8.
CoulonS.VilleF.LubrechtA. A.Effect of a dent on the pressure distribution in dry point contact model. ASME J. Tribol., 2002, 124, 220–222.
9.
GreenwoodJ. A.Morales-EspejelG. E.The behaviour of transverse roughness in EHL contacts. In Proceedings of the 23rd Leeds—Lyon Symposium on Tribology, 1997, pp. 307–312.
10.
VennerC. H.CouhierF.LubrechtA. A.GreenwoodJ. A.Ampli- tude reduction of waviness in transient EHL line contacts. In Proceedings of the 23rd Leeds—Lyon Symposium on Tribology, 1997, pp. 103–112.
11.
VennerC. H.LubrechtA. A.Amplitude reduction of non-isotropic harmonic patterns in circular EHL contacts under pure rolling. In Proceedings of the 25th Leeds—Lyon Symposium on Tribology, 1999, pp. 151–162.
12.
HookeC. J.Surface roughness modification in elastohydrodynamic line contacts operating in the elastic piezoviscous regime. Proc. Instn Mech. Engrs Part J: J. Engineering Tribology, 1998, 202, 145–162.
13.
HookeC. J.Surface roughness modification in elastohydrodynamic line contacts—the effects of roughness-wavelength, orientation and operating conditions. In Proceedings of the 25th Leeds—Lyon Symposium on Tribology, 1999, pp. 193–202.
14.
HookeC. J.VennerC. H.Surface roughness attenuation in line and point contacts. Proc. Instn Mech. Engrs Part J: J. Engineering Tribology, 2000, 214, 439–444.
MoesH.Lubrication and beyond. Technical report, code 115531, University of Twente, Enschede, The Netherlands, 2000.
17.
RoelandsC. J. A.Correlation aspects of the viscosity—temperature—pressure relationship of lubricating oils. PhD Thesis, Technical University Delft, The Netherlands.
18.
DowsonD.HigginsonG. R.Elastohydrodynamic lubrication, the fundamentals of roller and gear lubrication, 1996 (Pergamon Press, Oxford, Great Britain).
19.
JohnsonK. L.Contact mechanics, 1985 (Cambridge University Press, Cambridge, UK).
