Based on previous studies concerning pressure perturbations due to indents in dry and elastohydrodynamic lubrication contacts, this article presents the indented contact stress distribution and risk integral calculations. Different stress criteria are discussed and an equation predicting the risk integral is proposed.
HoupertLChevalierF. Rolling bearing stress based life. Part I: calculation model. ASME J Tribol. 2011.
2.
GnagyJHoupertLChevalierF. Rolling bearing stress based life. Part II: Experimental validation and calibration. ASME J Tribol. 2011.
3.
AiX. Effect of debris contamination on the fatigue life of roller bearings. Proc IMechE Part J: J Engineering Tribology2001; 215: 563–575.
4.
LubrechtAADwyer-JoyceRSIoannidesE. Analysis of the influence of indentations on contact life. In: Proceedings of the 19th Leeds–Lyon symposium on tribology, Leeds, UK, 1992, pp. 173–181.
5.
AiXNixonHP. Fatigue life reduction of roller bearings due to debris denting: Part I – Theoretical modeling. STLE, Tribol Trans2000; 43: 197–204.
6.
AiXNixonHP. Fatigue life reduction of roller bearings due to debris denting: Part II – Experimental validation. STLE, Tribol Trans2000; 43: 311–317.
7.
Coulon S. Prédiction de la durée de vie des contacts ponctuels lubrifiés en présence d'indentations. PhD Thesis, INSA-LYON, Lyon, France, 2001.
8.
CoulonSVilleFLubrechtAA. An abacus for predicting the rolling contact fatigue life reduction due to debris dents. In: Proceedings of the 28th Leeds–Lyon Symposium on Tribology, Lyon, France, 2002, pp. 283–294.
9.
CoulonSVilleFLubrechtAA. Effect of a dent on the pressure distribution in dry point contact model. ASME, J Tribol2002; 124: 220–222.
10.
BibouletNLubrechtAHoupertL. Contact pressure of indented wide elliptical contacts: dry and lubricated cases. ASME J Tribol2008; 130: 1–7.
11.
BibouletNLubrechtAAHoupertL. Contact pressure in indented elastohydrodynamic lubrication contacts. Proc IMechE Part J: J Engineering Tribology2008; 222: 415–421.
12.
VennerCHLubrechtAA. Multilevel methods in lubrication, Amsterdam: Elsevier Tribology Series, 2000.
13.
BibouletNHoupertLLubrechtAA. Contact stress and rolling contact fatigue of indented contacts: Part II, rolling element bearing life calculation and experimental data of indent geometries. Proc IMechE Part J: J Engineering Tribology. 2013 (in press).
14.
DudragneGGirodinD. Application au dimensionnement des roulements d'un nouveau modèle de calcul de la durée de vie. In: Actes JIFT 1999 – Roulements et tribologie – AFM/GST Tribologie1999, pp. 149–160.
15.
PiotDLormandGVincentA. Modélisation microstructurale et micromécanique de la distribution des durées de vie en fatigue de roulement. In: Actes JIFT 1995 – Roulements et tribologie – AFM/GST Tribologie1995, pp. 211–223.
16.
LundbergGPalmgrenA. Dynamic capacity of rolling bearings. Acta Polytech Mech Eng1947; 7: 207–213.
17.
IoannidesEHarrisTA. A new fatigue life mode for rolling bearings. ASME J Tribol1985; 107: 367–378.
18.
LubrechtAAJacobsonBOIoannidesE. Lundberg Palmgren revisited. In: Rolling element bearings – towards the 21st century, London, 16 November1990, pp. 17–20.
19.
BoussinesqJ. Applications des potentiels à l'étude de l'équilibre et du mouvement des solides élastiques, Paris: Gauthier-Villard, 1885.
20.
SainsotPLubrechtAA. Efficient solution of the dry contact of rough surfaces: a comparison of fast Fourier transform and multigrid methods. Proc IMechE Part J: J Engineering Tribology2011; 225: 441–448.
21.
KalkerJJ. Numerical calculation of the elastic field in a half-space. Commun Appl Numer Meth1986; 2: 401–410.
22.
Dang VanKLe DouaronALieuradeHP. Multiaxial fatigue limit: a new approach, Oxford: Pergamon Press, 1984, pp. 1879–1885.
23.
Papadopoulos I. Fatigue polycyclique des métaux : une nouvelle approche. PhD Thesis, ENPC, France, 1986.
24.
Cogdell JD. Timken internal report, Technical report, Timken company metrol-ogy laboratory, Canton, OH, USA, 2007.
25.
Ville F. Pollution solide des lubrifiants, indentations et fatigue des surfaces. PhD Thesis, INSA-LYON, Lyon, France, 1998.
26.
VilleFNeliasD. An experimental study on the concentration and shape of dents caused by spherical metallic particles in EHL contacts. STLE Tribol Trans1999; 42: 231–240.
27.
DesimoneHBernasconiABerettaS. On the application of Dang Van criterion to rolling contact fatigue. Wear2005; 260: 567–572.
28.
QiaoHEvansHPSnidleRW. Comparison of fatigue model results for rough surface elastohydrodynamic lubrication. Proc IMechE Part J: J Engineering Tribology2008; 222: 381–393.
