Thermal comfort is increasingly becoming a crucial factor to be considered in footwear design. The climate inside a shoe is controlled by thermal and moisture conditions and is crucial to attain comfort. Research undertaken has shown that thermal conditions play a dominant role in shoe climate. Development of thermal models that are capable of predicting in-shoe temperature distributions is an effective way forward to undertake extensive parametric studies to assist optimized design. In this paper, two-dimensional and three-dimensional thermal models of in-shoe climate were developed using finite element analysis through commercial code Abaqus. The thermal material properties of the upper shoe, sole, and air were considered. Dry heat flux from the foot was calculated on the basis of typical blood flow in the arteries on the foot. Using the thermal models developed, in-shoe temperatures were predicted to cover various locations for controlled ambient temperatures of 15, 25, and 35 °C respectively. The predicted temperatures were compared with multipoint measured temperatures through microsensor technology. Reasonably good correlation was obtained, with averaged errors of 6, 2, and 1.5 per cent, based on the averaged in-shoe temperature for the above three ambient temperatures. The models can be further used to help design shoes with optimized thermal comfort.
KuklaneK.HolmerI.GiesbrechtG.Change of footwear insulation at various sweating rates. J. Appl. Human Sci. Physiol. Anthrop., 199918(5), 161–168.
2.
CengelY.A.Heat transfer: a practical approach, 1998 (McGraw-Hill, New York).
3.
BlackC.MatthewJ.The physical properties of fabrics in relation to clothing: Iii. Heat insulation by fabrics used as body clothing. J. Text. Inst., 1934, 25, 249–276.
4.
DuboisC.Heat loss from the human body. Bull. N. Y. Acad. Med., 1939, 15, 143–173.
5.
BaxterS.CassieA.Thermal insulating properties of clothing. J. Text. Inst., 1943, 34, 41–54.
6.
GaggeA.P.StolwijkJ.A.J.HardyJ.D.Comfort and thermal sensations and associated physiological responses at various ambient temperatures. Environ. Res., 1967, 1, 1–20.
7.
NewburghL.H.ShitzerA.StroscheinL.A.VitalP.GonzalezR.R.PandolfK.B.Physiology of heat regulation and the science of clothing, 1968 (Hafner Publishing Co., London, UK).
8.
FourtL.HolliesN.R.S.ShitzerS.BellomoL. A.StroscheinL.A.GonzalezR.R.PandolfK.B.Clothing: comfort and function, 1970 (Marcel Dekker Inc., New York).
9.
MortonW.E.HearleJ.W.S.HavenithG.WangX.RichardsM.CandasV.MeinanderH.BroedeP.den HartogE.A.HolmerI.NockerW.Physical properties of textile fibres, 3rd edition, 1993 (Textile Institute, Manchester, UK).
10.
ShitzerA.StroscheinL.A.VitalP.HavenithG.RichardsM.WangX.BrödeP.CandasV.HartogE.D.HoérI.KuklaneK.MeinanderH.NockerW.Numerical analysis of an extremity in a cold environment including countercurrent arterio-venous heat exchange. J. Biomech. Engng, 1997, 119(2), 179–186.
11.
ShitzerA.BellomoS.StroscheinL.A.BrödeP.HavenithG.WangX.CandasV.den HartogE.A.GriefahnB.HolmerI.KuklaneK.MeinanderH.NockerW.RichardsM.Simulation of a cold-stressed finger including the effects of wind, gloves, and cold-induced vasodilatation. J. Biomech. Engng, 1998, 120(3), 389–394.
12.
LiY.HolcombeB.Mathematical simulation of heat and mass transfer in a human-clothing-environment. Text. Res. J., 1998, 68, 389–397.
13.
LiY.ZhuQ.Simultaneous heat and moisture transfer with moisture sorption, condensation, and capillary liquid diffusion in porous textiles. Text. Res. J., 2003, 73, 515–524.
14.
WanX.FanJ.A transient thermal model of the human body-clothing—environment system. J. Therm. Biol., 2008, 3387–97.
15.
WuH.FanJ.Study of heat and moisture transfer within multi-layer clothing assemblies consisting of different types of battings. Int. J. Therm. Sci., 2008, 47(5), 641–647.
16.
WisslerE.H.HavenithG.A simple theoretical model of heat and moisture transport in multi-layer garments in cool ambient air. Eur. J. Appl. Physiol., 2009, 105(5), 797–808.
17.
HavenithG.WangX.RichardsM.CandasV.MeinanderH.BroedeP.den HartogE.A.HolmérI.NockerW.Apparent and real cooling efficiency of moisture evaporation from the skin while wearing protective clothing. J. Physiol. Anthrop., 2007, 26, 272–273.
18.
HavenithG.RichardsM.WangX.BrädeP.CandasV.HartogE.D.HolmérI.KuklaneK.MeinanderH.NockerW.Apparent latent heat of evaporation from clothing: Attenuation and -‘heat pipe’ effects. J. Appl. Physiol., 2008, 104, 142–149.
19.
BrödeP.HavenithG.WangX.CandasV.den HartogE.A.GriefahnB.HolmérI.KuklaneK.MeinanderH.NockerW.RichardsM.Non-evaporative effects of a wet mid layer on heat transfer through protective clothing. Eur. J. Appl. Physiol., 2008, 104, 341–349.
20.
KuklaneK.Protection of feet in cold exposure. Ind. Health, 2009, 47, 242–253.
21.
LotensW.A.A simple model for foot temperature simulation. Report IZF 1989-8, TNO Institute for Perception, Soesterberg, The Netherlands, 1989.
22.
LotensW.A.HeusR.Van de LindeF.J.G.A 2-node thermoregulatory model for the foot. In Thermal physiology (Ed. MercerJ.B.), 1989, pp. 769–775 (Elsevier Science Publishers BV, Amsterdam, The Netherlands).
23.
KuklaneK.HolmérI.HavenithG.A comparison of Lotens' foot model and data from subjects: The use of boot insulation measured with thermal foot model in calculations. In Environmental Ergonomics VIII, VOl. 1 (Eds J.A. Hodgdon, J.H. Heaney, and M.J. Buono). Eighth International Conference on Environmental Ergonomics, San Diego, California, 1998, pp. 407–410.
24.
KuklaneK.HolmérI.HavenithG.Validation of a model for prediction of skin temperatures in footwear. J. Physiol. Anthrop. Appl. Human Sci., 2000, 19(1), 29–34.
25.
FialaD.LomasK.J.StohrerM.A computer model of human thermoregulation for a wide range of environmental conditions: The passive system. J. Appl. Physiol., 1999, 87, 1957–1972.
26.
FialaD.LomasK.J.StohrerM.Computer prediction of human thermoregulatory and temperature responses to a wide range of environmental conditions. Int. J. Biometeorol., 2001, 45(3), 143–159.
27.
PrekM.Thermodynamical analysis of human thermal comfort. Energy, 2006, 31, 732–743.
28.
BoregowdaS.TiwariS.ChaturvediS.Investigation of transient human thermo regulator responses to different environmental conditions. AIAA1996, 96, 1829.
29.
BoregowdaS.TiwariS.ChaturvediS.Simulation of human thermoregulation using finite element method. ASME Bioengng Conf., 1997, 35, 83–84.
30.
LewisR.MorganK.ThomasH.SeetharamuK.The finite element method in heat transfer analysis, 1996 (John Wiley & Sons, Inc., New York).
31.
CovillD.GuanZ.W.BaileyM.PopeD.Modelling the heat transfer in footwear using finite element analysis. In The engineering of sport 7 - vol. 2, 2009, pp. 247–254 (Springer, Paris, France).
32.
ABAQUS/Standard theory manual version 6.3, 2002 (Hibbitt, Karlsson & Sorensen, Inc., Pawtucket, Rhode Island).
33.
KerslakeD.M.The stress of hot environments, 1972 (Cambridge University Press, Cambridge, UK).
34.
LotensW.A.Heat transfer from humans wearing clothing. PhD Thesis, Delft University of Technology, Delft, The Netherlands, 1992.
35.
GrettonJ.C.BrookD.B.DysonH.M.HarlockS.C.Moisture vapor transport through waterproof breathable fabrics and clothing systems under a temperature gradient. Text. Res. J., 1998, 68(12), 936–941.
36.
LiY.LiuF.Y.LuoZ.An integrated model for simulating interactive thermal processes in human-clothing system. J. Therm. Biol., 2004, 29, 567–575.
37.
VoelkerC.HoffmannS.KornadtO.ArensE.ZhangH.HuizengaC.Heat and moisture transfer through clothing. IBPSA Building Simulation, University of Strathclyde, Glasgow, UK, 27–30 July 2009, pp. 1360–1366.
38.
BorzacchielloA.AmbrosioL.NicolaisL.HarperE.J.TannerK.E.BonfieldW.Isothermal and non-isothermal polymerisation of a new bone cement. J. Mater. Sci.: Mater. Med., 1998, 9, 317–324.
