The Effects of Proteins on the Friction and Lubrication of Artificial Joints

Abstract

The tribological testing of artificial hip and knee joints in the laboratory has been ongoing for several decades. This work has been carried out in an attempt to simulate the loading and motion conditions applied in vivo and, therefore, the potential for the success of the joint. However, several different lubricants have been used in these tests. The work documented in this paper compares results obtained using different lubricants and makes suggestions for future work. Hip joints and knee joints of different material combinations were tested in a friction simulator to determine their friction and lubrication properties. Both carboxymethyl cellulose (CMC) fluids and bovine serum (with CMC fluids added) were used as the lubricants. These were prepared to various viscosities to produce the Stribeck plots. Human synovial fluid, of just one viscosity, was used as the lubricant with some of the joints to give a true comparison with physiological lubricants. The results showed that, in most cases, the lubricant had a significant effect on the friction developed between the joint surfaces. This is thought to be due to the proteins that are present within the bovine serum adsorbing to the bearing surfaces, creating ‘solid-like’ films which rub together, protecting the surfaces from solid-to-solid contact. This would be beneficial in terms of wear but can either increase or decrease the friction between the contacting surfaces. It is important to simulate the conditions in vivo as closely as possible when testing these joints to try to obtain a better comparison between the joints and to simulate more accurately the way that these joints will operate in the body. In an attempt to simulate synovial fluid, bovine serum seems to be the most popular lubricant used at present. It would be beneficial, however, to develop a new synthetic lubricant that more closely matches synovial fluid. This would allow us to predict more accurately how these joints would operate long term in vivo.

Keywords

lubrication alumina cobalt-chromium-molybdenum ultra-high molecular weight polyethylene polyurethane

Get full access to this article

View all access options for this article.

References

Revell

P. A.

AL-Saffar

Kobayashi

Biological reaction to debris in relation to joint prostheses

Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1997, 211 (H2), 187–199.

Howie

D. W.

Vernon-Roberts

Oakeshott

Manthey

A rat model of resorption of bone at the cement-bone interface in the presence of polyethylene wear particles

J. Bone Jt Surg., 1988, 70A (2), 257–263.

Scholes

S. C.

Unsworth

Comparison of friction and lubrication of different hip prostheses

Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2000, 214, 49–57.

Scholes

S. C.

Unsworth

Blamey

J. M.

Burgess

I. C.

Jones

Smith

Design aspects of compliant, soft layer bearings for an experimental hip prosthesis

Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2006 (submitted).

Unsworth

Hall

R. M.

Burgess

I. C.

Wroblewski

B. M.

Streicher

R. M.

Semlitsrh

Frictional resistance of new and explanted artificial hip joints

Wear, 1995, 190, 226–231.

Dowson

Biotribology of natural and replacement synovial joints In Biomechanics of diarthrodal joints, Vol. 2 (Eds Mow

V. C.

Ratcliffe

Woo

S. L.-Y.

), 1990, Ch.29, pp. 305–345 (Springer, Verlag, New York).

Auger

D. D.

Dowson

Fisher

Jin

Z.M.

Friction and lubrication in cushion form bearings for artificial hip joints

Proc. Instn Mech. Engrs, Part H: J, Engineering in Medicine, 1993, 207, 25–3.

Smith

S. L.

Ash

H. E.

Unsworth

A tribological study of UHMWPE acetabular cups and polyurethane compliant layer acetabular cups

J. Biomed. Mater. Res., 2000, 53 (6), 710–716.

Scholes

S. C.

Smith

S. L.

Ash

H. R.

Unsworth

The lubrication and friction of conventional UHMWPE, novel compliant layer and hard bearing surfaces for use in total hip prostheses In Friction, lubrication and wear of artificial joints (Ed. Hutchings

), 2002, pp. 59–74 (Professional Engineering Publishing Limited, Bury St Edmunds and London).

10.

Elfick

A. P. D.

Hall

R. M.

Pinder

I. M.

Unsworth

The frictional behaviour of explanted PCA hip prostheses

Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1998, 212, 395–397.

11.

Saikko

Pfaff

H.-G.

Low wear and friction in alumina/alumina total hip joints

Acta Orthop. Scand., 1998, 69 (5), 443–448.

12.

Gore

T. A.

Higginson

G. R.

Kornberg

R. K.

Some evidence of squeeze-film lubrication in hip prostheses

J. Engng Med., 1981, 10, 89–95.

13.

Walker

P. S.

Gold

B. L.

Comparison of the bearing performance of normal and artificial human joints

J. Lubric. Technol., 1973, 95, 333–339.

14.

Scholes

S. C.

Green

S.M.

Unsworth

The wear of metal-on-metal total hip prostheses measured in a hip simulator

Proc. Instn Mech. Engrs, Part H:J. Engineering in Medicine, 2001, 215, 523–530.

15.

Jennings

L. M.

Fisher

A biomechanical and tribological investigation of a novel compliant allpolyurethane acetabular resurfacing system. In Proceedings of the IMechE Conference, Joined at. the Hip, London, June 2002.

16.

McKellop

H. A.

Campbell

Park

S.-H.

Schmalzried

T. P.

Grigoris

Amstutz

H. C.

Sarmiento

The origin of submicron polyethylene wear debris in total hip arthroplasty

Clin. Orthop. Related Res., 1995, 311, 3–20.

17.

Bigsby

R. J. A.

Hardaker

C. S.

Fisher

Wear of ultra-high molecular weight polyethylene acetabular cups in a physiological hip joint simulator in the anatomical position using bovine serum as a lubricant

Proc. Instn Mech. Engrs, Part H: J. Engineering in. Medicine, 1997, 211, 265–271.

18.

Goldsmith

A. A.J.

Dowson

A multi-station hip joint simulator study of the performance of 22 mm diameter zirconia-ultra-high molecular weight polyethylene total replacement hip joints

Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1999, 213, 77–90.

19.

Unsworth

Pearcy

M. J.

White

E. F. T.

While

Frictional properties of artificial hip joints

J. Engng Med., 1988, 17, 101–104.

20.

Ash

H. E.

Scholes

S. C.

Unsworth

Jones

The effect of bone cement particles on the friction of polyethylene and polyurethane knee bearings

Physics Med. Biology, 2004, 49, 3413–3425.

21.

English

T. A.

Kilvington

In vivo records of hip loads using a femoral implant with telemetric output (a preliminary report)

J. Biomed. Engng, 1979, 1 (2), 111–115.

22.

Unsworth

The effects of lubrication in hip joint prostheses

Physics Med. Biology, 1978, 23 (2), 253–268.

23.

Geigy Scientific Tables, 7th edition, 1970 (CIBA-Geigy Limited, Basle).

24.

Unsworth

Pearcy

M. J.

White

E. F. T.

White

Soft layer lubrication of artificial hip joints. In Proceedings of the International Conference on Tribology, Friction, Lubrication and Wear, 50 Years on, 1987, pp. 715–724 (Mechanical Engineering Publications Limited, London).

25.

Unsworth

Vassiliou

Elfick

A. P. D.

Scholes

S. C.

McMinn

Band

Fluid film lubrication of metal-on-metal hip joints - fact or fiction In Abstracts of the World Congress on Medical Physics and Biomedical Engineering Sydney, Australia, 2003, paper 209:15.06B.

26.

Williams

Ingham

Stone

M. H.

Jin

Z. M.

Fisher

Friction of different total hip replacements under different lubrication conditions. In Abstracts, 30th Annual Meeting of the Society For Biomaterials, Memphis, Tennessee, USA, 2005, p. 474.

27.

Spikes

Mechanisms of boundary lubrication. In Proceedings of the Tenth International Colloquium on Tribology - Solving Friction and Wear Problems, Esslingen, Germany, 1996, pp. 1737–1751.