Non-destructive and non-invasive observation of friction and wear of human joints and of fracture initiation by acoustic emission

Abstract

Quality control in orthopaedic diagnostics according to DIN EN ISO 9000ff requires methods of non-destructive process control, which do not harm the patient by radiation or by invasive examinations. To obtain an improvement in health economy, quality-controlled and non-destructive measurements have to be introduced into the diagnostics and therapy of human joints and bones. A non-invasive evaluation of the state of wear of human joints and of the cracking tendency of bones is, as of today's point of knowledge, not established.

The analysis of acoustic emission signals allows the prediction of bone rupture far below the fracture load. The evaluation of dry and wet bone samples revealed that it is possible to conclude from crack initiation to the bone strength and thus to predict the probability of bone rupture.

Keywords

acoustic emission analysis non-invasive analysis bone cracking joint wear bone strength

Get full access to this article

View all access options for this article.

References

Cooper

Cushnaghan

Kirwan

J. R.

Dieppe

P. A.

Rogers

McAldindon

McCrae

Radiographic assessment of knee joint in osteoarthritis. Ann. Rheum. Dis. (UK), 1992, 51, 80–82.

Sutton

D. J.

Sadowsky

P. L.

Bernrcuter

W. K.

Temporomandibular joint sounds and condyle/disk relations on magnetic resonance images. Am. J. Dentofac Orthop., 1992, 101 (1), 70–78.

Hanagad

Clinton

R. G.

Lopez

J. P.

Acoustic emission in bone substance. In Proceedings of the ASME Symposium on

Biomechanics, 1973, pp. 79–81 (American Society of Mechanical Engineers, New York).

Kaiser

Erkenntnisse und Folgerungen aus der Messung von Gera'uschen bei Zugbeanspruchung von metallischen Werkstoffen. Arch. Eisenhüttenwesen, 1953, 24 (1, 2), 43–45.

Eisenblätter

Acoustic Emission, 1988 (Deutsche Gesellschaft für Metallkunde Informationsgesellschaft mbH, Darmstadt).