High-density polyethylene (HDP) has been used in clinical practice in total hip replacement since its introduction by Charnley in November 1962. Fears are being expressed that this may be the weakest link and the ultimate cause of failure of the arthroplasty. Long-term clinical experience suggests that loosening may be the primary cause while the presence of HDP wear particles is secondary. Healing of endosteal cavities can take place in the presence of HDP wear particles.
EskolaA.SantavirtaS.KonttinenY. T.HoikkV.TallrothK.LindholmT. S.Cementless revisions for aggressive granulomatous lesions in hip replacementsJ. Bone Jt Surg., 1990, 72B, 212–216.
3.
SchmalzriedT. P.KwongL. M.JastyM.The mechanism of loosening in cemented acetabular components in total hip arthroplastyClin. Orthop., 1992, 276, 115–125.
4.
EftekharN. S.Total hip arthroplasty, 1993, p. 164 (Mosby, St Louis, Missouri, USA).
5.
WolffJ.Das Gesetz der Transformation der Knochen, 1892 (Quarto, Berlin).
6.
MalcolmA. J.Pathology of cemented low-friction arthroplasties in autopsy specimens In Implant Bone Interface (Ed. John Older) 1990, pp. 77–81 (Springer Verlag, London).
7.
RautV. V.StoneM. H.SineyP. D.WroblewskiB. M.Bulk autograft for a deficient acetabulum in Charnley low-friction arthroplasty. A 2–9 year follow-up studyJ. Arthroplasty, 1994, 9, 393–398.
8.
WroblewskiB. M.TaylorG. W.SineyP. D.Charnley low-friction arthroplasty 19 to 25 year resultsOrthopaedics, International Edition, 1992, 15, 421–424.
