On the use of control surface excitation in flutter testing

Abstract

Abstract

Flutter testing is aimed at demonstrating that the aircraft flight envelope is flutter free. Response measurements from deliberate excitation of the structure are used to identify and track frequency and damping values against velocity. In this paper, the common approach of using a flight control surface to provide the excitation is examined using a mathematical model of a wing and control surface whose rotation is restrained by a simple actuator. In particular, it is shown that it is essential to use the demand signal to the actuator as a reference signal for data processing. Use of the actuator force (or strain) or control angle (or actuator displacement) as a reference signal is bad practice because these signals contain response information. It may also be dangerous in that the onset of flutter may not be seen in the test results.