The effect of an insulated rail joint (IRJ) on the contact stress variation near wheel-rail contact zones was simulated by employing three-dimensional finite element models. Three linear elastic IRJ materials, i.e. epoxy-fibreglass, polytetrafluoroethylene (PTFE) and Nylon-66, were investigated. Contact elements were used to simulate the interaction between the wheel and rail contact points. Numerical results showed that the presence of IRJ might significantly affect the wheel-rail contact stress distributions. Results also indicated that the traditional Hertzian contact theory is no longer available to predict the contact stress distribution around the rail joints.
CoxJ. E.KeerA. D.Analysis and tests of bonded insulated rail joints subjected to vertical wheel loadsInt. J. Mech. Sci., 1999, 41, 1253–1272.
2.
StringfellowR. G.MayvillR. A.Numerical analysis of a railroad bolt hole fracture problemTheor. Appl. Fracture Mechanics, 1995, 24, 1–12.
3.
HertzH. Über die Berührung fester elastischer Körper.J. Reine Angew. Mathematik, 1982, 92, 156–171.
4.
HansonM. T.KeerL. M.Mechanics of edge effects on frictionless contactsInt. J. Solids Structs, 1995, 32, 391–405.
5.
ChoS. S.KomvopoulosK.Finite element analysis of subsurface crack propagation in a half-space due to a moving asperity contactWear, 1997, 209, 57–68.
6.
ChenS. Y.FarrisT. N.ChandrasekarS. Contact mechanics of Hertzian cone cracking.Int. J. Solid Structs, 1995, 32, 329–340.
7.
CaoY.ZhangG.Multiple surface cracks initiation and growth in glass-ceramics loaded by a sphereEngng Fracture Mechanics, 2000, 67, 277–292.
8.
JohnsonK. L.Contact Mechanics, 1985. pp. 101–102 (Cambridge University Press, Cambridge).
9.
DukkipatiR. V.Vehicle Dynamics, 2000, pp. 120–122 (Alpha Science).
10.
KulkarniS. M.HahnG. T.RubinC. A.BhargavaV.Elastic-plastic finite element analysis of three-dimensional, pure rolling contact at the shakedown limitJ. Appl. Mechanics, 1990, 57, 57–65.
11.
YanW.FischerF. D.Applicability of the Hertz contact theory to rail-wheel contact problemsArch. Appl. Mechanics, 2000, 70, 255–268.
12.
RamananL.KumarKrishna R.SriramanR.Thermo-mechanical finite element analysis of a rail wheelInt. J. Mech. Sci., 1999, 41, 487–505.
13.
YuC. C.KeerL. M.Three-dimensional residual stress effects on the fatigue crack initiation in railsTrans. ASME, J. Tribology, 1997, 119, 660–666.
14.
BhargavaV.HahnG. T.RubinC. A.An elastic-plastic finite element model of rolling contact. Part 1: Analysis of single contactsJ. Appl. Mechanics, 1985, 52, 67–74.
15.
KulkamiS. M.HahnG. T.RubinC. A.BhargavaV.Elasto-plastic finite element analysis of repeated three-dimensional, elliptical rolling with rail wheel propertiesJ. Appl. Mechanics, 1991, 113, 434–441.
16.
ABAQUS User's Manual, Version 5.8, 1998 (Hibbitt, Karlsson and Sorensen, Providence, Rhode Island).
17.
CallisterW. D.JrMaterial Science and Engineering-An Introduction, 2000, pp. 794–797 (John Wiley).
