In this paper, the pure rolling contact stresses in conical rollers under normal loading are studied. The existing analytical expression for pure rolling contact pressure in uniform cross-section cylinders is modified to determine the contact area, the contact pressure, and its distribution in conical rollers under normal loading. The Hertzian contact stresses are determined for the modified pure rolling contact pressure distribution. The theoretical results are compared with the finite element analysis using ABAQUS, for different vertex angles, materials, and loads. The results of the theoretical model are found to be consistent with the finite element simulations in predicting the contact pressure, the distribution, and the contact stresses in conical rollers.
MoyarG. J.JoDeanM.Surface failure of bearings and other roller elements. Bulletin 468, Engineering Experiment Station, University of Illinois, Champaign, Illinois, USA, 1964.
2.
BoresiA. P.OmarM. S.Advanced mechanics of materials, 3rd edition, 1985 (John Wiley, New York).
3.
YinR. C.BradleyR.MehshariA.YamiB. S.GofailiY. M.Premature failure of a spiral bevel pinion in a turbine condenser gear reducerEngng Failure Analysis, 2006, 13 (5), 727–731.
4.
HertzH.Gesammelte Werke, Band I, 1895 (Barth, Leipzig) (English transl., Hertz, H. Miscellaneous papers, 1896 (Macmillan, London)).
5.
LundbergG.Elastische Beruehrung Zweier HalbraeumeForsch. Geb. Ingenieurwesens A, 1936, 10, 201–211.
6.
MindlinR. D.Compliance of elastic bodies in contactTrans. ASME, J. Appl. Mechanics, 1949, 71, 259–268.
7.
SmithJ. O.LiuC. K.Stresses due to tangential and normal loads on an elastic solid with application to some contact stress problemsTrans. ASME, J. Appl. Mechanics, 1953, 75, 157–166.
8.
ThomasH. R.HoerschV. A.Stress due to the pressure of one elastic solid upon another. Bulletin 212, Engineering Experiment Station, University of Illinois, Champaign, Illinois, USA, 1930.
9.
RadzimovskyE. I.Stress distribution and strength condition of two rolling cylinders. Bulletin 408, Engineering Experiment Station, University of Illinois, Champaign, Illinois, USA, 1953.
10.
Al-ZainH. O.Contact stresses in conical shaped rollers. Masters Thesis, Department of Mechanical Engineering, Iowa State University 2004.
11.
TimoshenkoS. P.GoodierJ. N.Theory of elasticity, 3rd edition, 1970 (McGraw-Hill, New York).
12.
NortonR. L.Machine design: an integrated approach, 3rd edition, 2006 (McGraw-Hill, New York).
ShakoorM.AliM.QamhiyahA.FlugradD.Cam fatigue life prediction for translating roller-follower systems. In Proceedings of the Ninth International Fatigue Congress, Atlanta, Georgia, USA, 2006, pp. 1–10 (Elsevier).
15.
LitVinL. F.FuentesA.HayasakaK.Design, manufacture, stress analysis, and experimental tests of low-noise high endurance bevel gearsMechanism Mach. Theory, 2006, 41 (1), 83–118.
16.
ZhangX. C.XuB. S.WangH. D.WuY. X.JiangY.Hertzian contact response of single-layer, functionally graded and sandwich coatingsMater. Des., 2007, 28 (1), 47–54.
17.
SumW. S.WilliamsE. J.LeenS. B.Finite element, critical-plane, fatigue life prediction of simple and complex contact configurationsInt. J. Fatigue, 2005, 27 (4), 403–416.
JohnsonK. L.Contact mechanics, 1985 (Cambridge University Press, Cambridge).
20.
ReusnerH.The logarithmic roller profile - the key to superior performance of cylindrical and tapered roller bearingsBall Bearing J., SKF, 230, 2–10.
21.
ShakoorM.AliM.QamhiyahA.FlugradD.Cam size optimization based on a fatigue life model. In Proceedings of the ASME 2006 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Philadelphia, Pennsylvania, USA, 2006, pp. 1–8 (American Society of Mechanical Engineers, New York).
22.
LittmannW. E.WidnerR. L.Propagation of contact fatigue from surface and subsurface originsTrans. ASME, J. Basic Engng, 1966, 88, 624–636.
