Sage Journals: Discover world-class research

Abstract

It is worthwhile to design a more accurate dynamic model for air springs, to investigate the dynamic behaviour of an air spring suspension, and to analyse and guide the design of vehicles with air spring suspensions. In this study, a dynamic model of air spring was established, considering the heat transfer process of the air springs. Two different types of air spring were tested, and the experimental results verified the effectiveness of the air spring model compared with the traditional model. The key factors affecting the computation accuracy were studied and checked by comparing the results of the experiments and simulations. The new dynamic model of the air spring was integrated into the full-vehicle multi-body dynamics model, in order to investigate the air suspension behaviour and vehicle dynamics characteristics. The co-simulation method using ADAMS and MATLAB/Simulink was applied to integration of the air spring model with the full-vehicle multi-body dynamics model.

Keywords

vehicle dynamics air spring dynamic model co-simulation

Get full access to this article

View all access options for this article.

References

Gauterin

Sorge

Noise, vibration and harshness of air spring systems. VDI-Berichte 1632. 2001, pp. 273–285.

Quaglia

Sorli

Guala

Air suspensions: Nonlinear analysis and design considerations. In Proceedings of the Second Internationales Fluidtechniscen Kolloquium (2. IFK), Dresden, Germany, March 2000, vol. II, pp. 479–492.

Presthus

Derivation of air spring model parameters for train simulation. Master's Thesis, Department of Applied Physics and Mechanical Engineering, Luleå University of Technology, Luleå, Sweden, 2002.

Hostens

Deprez

Ramon

An improved design of air suspension for seats of mobile agricultural machines. J. Sound Vibr., 2004, 276(1-2), 141–156.

Stein

G. J.

An electro-pneumatic active suspension for driver's seats for agricultural tractors. Arch. Acoustics, 1996, 23, 345–353.

Erin

Wilson

Zapfe

An improved model of a pneumatic vibration isolator: Theory and experiment. J. Sound Vibr., 1998, 218(1), 81–101.

Bachrach

B. I.

Rivin

Analysis of a damper pneumatic spring. J. Sound Vibr., 1983, 86(2), 191–197.

Ivantysynova

Modelling of hydraulic-mechanical systems co-simulation between ADAMS and MATLAB/Simulink. Report, Institute for Aircraft Systems Engineering, Hamburg Germany, February 2003.

9 MSC: interfacing ADAMS and controls training, 1999 (MSC.Software Corporation).

10.

Gokarn

A. M.

Realisation and investigation of an air-spring system on the DaimlerChrysler A-Class. Master's Thesis, Faculty of Mechanical Engineering, Aachen University of Technology Aachen, Germany, 2003.

11.

Winnen

Aufbau eines Luftfedermodells dür die simulationsprogramme MATLAB/Simulink und ADAMS/CAR. Diplomarbeit, Faculty of Mechanical Engineering, Aachen University of Technology, Aachen, Germany, 2005.

12.

12 Air spring replacement guide, 2006 (Firestone Industrial Products Inc., Indianapolis, Indiana).

Dynamic model of an air spring and integration into a vehicle dynamics model

Abstract

Keywords

Get full access to this article

References