Implementation of semi-active damping on a tri-axle heavy-vehicle suspension

Abstract

A semi-active truck damper was developed in conjunction with a commercial shock absorber manufacturer. A linearized damper model was developed for control system design purposes. Open- and closed-loop damper force tracking control was implemented, with tests showing that an open-loop approach gave the best compromise between response speed and accuracy.

A hardware-in-the-loop test facility was used to investigate performance of the damper when combined with a simulated quarter-car model. The input to the vehicle model was a set of randomly generated road profiles, each profile traversed at an appropriate speed. Modified skyhook damping tests showed a simultaneous improvement over the optimum passive case of 13 per cent in vertical body acceleration and 8 per cent in dynamic tyre forces.

Full-scale vehicle tests of the damper on a heavy tri-axle trailer were carried out. Implementation of modified skyhook damping yielded a simultaneous improvement over the optimum passive case of 8 per cent in vertical body acceleration and 8 per cent in dynamic tyre forces.

Keywords

semi-active damper tri-axle hardware-in-the-loop real time control skyhook tyre force body acceleration

Get full access to this article

View all access options for this article.

References

1 National road maintenance condition survey 2006. Department for Transport, UK, 2006.

2 Scottish transport statistics 2006 edition. Scottish Executive, UK, 2006.

3 Northern Ireland transport statistics 2005-2006. Northern Ireland Statistics & Research Agency, Belfast, UK, 2006.

Kitching

K. J.

Cole

D. J.

Cebon

Use of controllable suspensions to minimise road damage. Proc. Instn Mech. Engrs, Part D: J. Automobile Engineering, 2000, 214, 13–31.

Cebon

Handbook of vehicle-road interaction, 1999 (Swets & Zeitlinger, Lisse).

Cole

D. J.

Cebon

Truck suspension design to minimise road damage. Proc. Instn Mech. Engrs, Part D: J. Automobile Engineering, 1996, 210(2), 95–107.

Redfield

R. C.

Karnopp

D. C.

Performance sensitivity of an actively damped vehicle suspension to feedback variation. Trans. ASME, J. Dynamic Systems, Measmt Control, 1989, 111, 51–60.

Kitching

K. J.

Semi-active damping of heavy vehicles. PhD Thesis, Engineering Department, University of Cambridge, Cambridge, UK, 1997.

Roebuck

R. L.

Kitching

K. J.

Cebon

de Ruiter

Developments in semi-active heavy vehicle suspensions. In Proceedings of the Sixth International Symposium on Heavy Vehicles, Weights and Dimensions, Saskatoon, Canada, 18-22 June 2000.

10.

de Kock

Development of a new continuously variable damper for semi-active suspensions. In Proceedings of the IMechE Symposium, 1992, paper C389/471 pp. 141–151 (Institution of Mechanical Engineers, London).

11.

Merrit

H. E.

Hydraulic control systems, 1967 (John Wiley, New York).

12.

Bradley

Basic electrical power and machines, 1994 (Chapman & Hall, London).

13.

Besinger

F. H.

Cebon

Cole

D. J.

Force control of a semi-active damper. Veh. System Dynamics, 1995, 24(9), 695–723.

14.

Besinger

F. H.

Cebon

Cole

D. J.

Experimental investigation into the use of semi-active dampers on heavy lorries. Veh. System Dynamics, 1991, 20(Suppl.), 57–71.

15.

Robson

J. D.

Road surface description and vehicle response. Int. J. Veh. Des., 1979, 1(1), 25–35.

16.

Roebuck

R. L.

Cebon

Jeppesen

B. J.

Haque

A systems approach to controlled heavy vehicle suspensions. Int. J. Heavy Veh. Systems, 2005, 12(3), 169–192.

17.

Miege

A. J. P.

Cebon

Active roll control of an experimental articulated vehicle. Proc. IMechE, Part D: J. Automobile Engineering, 2005, 219(6), 791–806.