Sage Journals: Discover world-class research

Abstract

In this study a multizone model of spark-ignition engine combustion is validated and used to predict the thermal efficiency and NO _x emissions of the engine. The model is validated against an engine map obtained from an extensive series of experiments. An optimizing algorithm based on particle swarm concepts is applied to the model to find a trade-off between efficiency and NO _x emissions using a predefined cost function. Optimization is performed for three cases, each of which progressively includes more variables for optimization. A further constrained optimization case is performed with constant values of several of the variables set at the average values found in the three prior cases. These variables are the ones that change over a small domain. The results show the potential improvement in efficiency while achieving remarkably low NO _x emissions. They emphasize the importance of exhaust gas recirculation (EGR) at high compression ratio and high loads when the maximum in-cylinder pressures are very high. They also suggest some strategies for valve timings that use internal EGR (residual gas) and move towards different compression and expansion ratios (Atkinson cycle).

Keywords

maximum thermal efficiency spark-ignition engine optimizing algorithm exhaust gas recirculation PSO algorithm residual fraction

Get full access to this article

View all access options for this article.

References

Kesgin

Study on prediction of the effects of design and operating parameters on NO_x emissions from a leanburn natural gas engine. Energy Conservation and Managmt, 2003, 44(6), 907–921.

Xiaoping

Shu

Han

Jingyie

Wang

Numerical optimization for in-cylinder processes of a spark ignition engine. SAE Paper 941936, 1994.

Kesgin

Genetic algorithm and artificial neural network for engine optimization of efficiency and NO_x emission. Fuel, 2004, 83(7–8), 885–895.

Ratnaweera

A. C.

Performance optimization of spark ignition engines PhD Thesis, University of Melbourne, 2004.

McFadden

P. D.

Flame propagation in a sparkignition engine PhD Thesis, University of Melbourne, 1978.

Raine

R. R.

Stone

C. R.

Gould

Modeling of nitric oxide formation in spark ignition engines with a multizone burned gas. Combust. Flame, 1995, 102, 241–255.

Tabaczynski

R. J.

Trinker

F. H.

Shannon

B. A. S.

Further refinement and validation of a turbulent flame propagation model for spark-ignition engines. Combust. Flame, 1980, 39, 111–121.

Watson

H. C.

Reaction chemistry, laminar and turbulent flames, quenching. Road Transport Engine Emission Course Notes, University of Melbourne, Theme: Fundamentals of combustion and sources of emission, 2005.

Mehrani

Watson

H. C.

Joint efficiency and NO_x optimization using a PSO algorithm. SAE paper 2006–01–1109, 2006.

10.

Turns

S. R.

An introduction to combustion, concepts and applications, 1996 (McGraw-Hill, New York).

11.

Blumberg

Kummer

J. T.

Prediction of NO formation in spark-ignited engines - an analysis of methods of control. Combust. Sci. Technol., 1971, 4, 73–95.

12.

Ferguson

C. R.

Kirkpatrick

A. T.

Internal combustion engines, 2001 (John Wiley & Sons, Ltd, Chichester).

13.

Baker

Watson

Mpi air/fuel mixing for gaseous and liquid lpg. SAE Paper 2005–01–0246, 2005.

14.

Mehrani

NO_x and efficiency optimization using particle swarm algorithm. Master Thesis, Department of Mechanical Engineering, University of Melbourne, 2005.

15.

Lumsden

Watson

H. C.

Optimum control of an S.I. engine with a λ = 5 capability. SAE Paper 950689, 1995.

A search for maximum efficiency and NO x reduction through spark-ignition engine design optimization at λ =1

Abstract

Abstract

Keywords

Get full access to this article

References