An optically accessible single-cylinder spark-ignition engine operated under homogeneous, part-load conditions is experimentally investigated using optical and spark diagnostics to evaluate the relationship between the spark, flow, and flame with increasing dilution using several levels of exhaust gas recirculation (EGR). Voltage and current measurements of the secondary spark circuit are compared with simultaneous high-speed spark plasma imaging, particle image velocimetry measurements of the flow field, and burned gas images. Specifically, characteristic restrike cycles and normal cycles are examined under the 0 % EGR and 12.9 % EGR conditions to reveal a relationship between the magnitude and direction of the velocity near the spark plug and the spark’s behavior coupled with that of the subsequent flame propagation. Through the use of conditional statistics and correlation analysis of data sets of all non-restrike and all restrike cycles, the horizontal velocity across the spark gap was identified as a critical quantity in facilitating more stable and faster combustion under diluted mixture conditions.
MalyRVogelM.Initiation and propagation of flame fronts in lean CH4-air mixtures by the three modes of the ignition spark. Symp (Int) Combust1979; 17: 821–831.
6.
LeeMJHallMEzekoyeOA, et al. Voltage, and energy deposition characteristics of spark ignition systems. SAE technical paper series. Warrendale, PA: SAE International, 11April2005.
7.
ShiraishiTTerajiAMoriyoshiY.The effects of ignition environment and discharge waveform characteristics on spark channel formation and relationship between the discharge parameters and the EGR combustion limit. SAE Int J Engines2015; 9: 171–178.
8.
YuXYangZYuS, et al. Discharge characteristics of current boosted spark events under flow conditions. In: Proceedings of the ASME internal combustion engine division fall technical conference 2017: Presented at ASME 2017 internal combustion engine fall technical conference, 15–18 October 2017, Seattle, WA. New York, NY: American Society of Mechanical Engineers.
9.
YangZYuXYuS, et al. Impacts of spark discharge current and duration on flame development of lean mixtures under flow conditions. In: Proceedings of the ASME internal combustion engine fall technical conference -2018-: Presented at ASME 2018 internal combustion engine fall technical conference, 4–7 November, 2018, San Diego, CA. New York, NY: American Society of Mechanical Engineers.
10.
SayamaSKinoshitaMMandokoroYFuyutoT.Spark ignition and early flame development of lean mixtures under high-velocity flow conditions: an experimental study. Int J Engine Res2019; 20: 236–246.
11.
HuangSLiTMaPXieSZhangZChenR.Quantitative evaluation of the breakdown process of spark discharge for spark-ignition engines. J Phys D Appl Phys2020; 53: 045501.
12.
FanslerTDDrakeMCDüwelI, et al. Fuel-spray and spark plug interactions in a spray-guided direct-injection gasoline engine. In: Proceedings of the seventh international symposium on internal combustion diagnostics, Baden Baden, 18–19 May 2006, pp. 81–97. Mainz-Kastel: AVL Deutschland.
13.
PetersonBSickV.High-speed flow and fuel imaging study of available spark energy in a spray-guided direct-injection engine and implications on misfires. Int J Engine Res2010; 11: 313–329.
14.
DahmsRNDrakeMCFanslerTDKuoTWPetersN.Understanding ignition processes in spray-guided gasoline engines using high-speed imaging and the extended spark-ignition model Sparkcimm. Part A: spark channel processes and the turbulent flame front propagation. Combust Flame2011; 158: 2229–2244.
15.
KawaharaNHashimotoSTomitaE.Spark discharge ignition process in a spark-ignition engine using a time series of spectra measurements. Proc Combust Inst2017; 36: 3451–3458.
16.
WindartoCLimO.Spark discharge energy effect on in-cylinder characteristics performance of rapid compression and expansion machine with spark ignition direct injection strategy. Fuel2023; 337: 127165.
17.
OpacichKCOmbrelloTMHeyneJSLefkowitzJKLeiwekeRJBusbyK.Analyzing the ignition differences between conventional spark discharges and nanosecond-pulsed high-frequency discharges. Proc Combust Inst2021; 38: 6615–6622.
18.
MaiVTShySChenY-R.Single- and dual-channel nanosecond repetitively pulsed discharges at small and large spark gaps for turbulent premixed spherical flame initiation. Proc Combust Inst2023; 39: 2219–2228.
19.
JungDSasakiKSugataK, et al. Combined effects of spark discharge pattern and tumble level on cycle-to-cycle variations of combustion at lean limits of SI engine operation. SAE technical paper series. Warrendale, PA: SAE International, 2017.
20.
TsuboiSMiyokawaSMatsudaMYokomoriTIidaN. Influence of spark discharge characteristics on ignition and combustion process and the lean operation limit in a spark ignition engine. Appl Energy2019; 250: 617–632.
21.
SmithJDSickV.A multi-variable high-speed imaging study of ignition instabilities in a spray-guided direct-injected spark-ignition engine. SAE technical paper series. Warrendale, PA: SAE International, 2006.
22.
DrakeMCFanslerTDPetersonKH.Stratified ignition processes in spray-guided SIDI engines. In: Proceedings of the ninth international symposium on internal combustion diagnostics, Baden Baden, 8–9 June, 2010, pp.87–98. Mainz-Kastel: AVL Deutschland.
23.
FanslerTDReussDLSickVDahmsRN.Invited review: combustion instability in spray-guided stratified-charge engines: A review. Int J Engine Res2015; 16: 260–305.
24.
BodeJSchorrJKrügerCDreizlerABöhmB.Influence of the in-cylinder flow on cycle-to-cycle variations in lean combustion DISI engines measured by high-speed scanning-PIV. Proc Combust Inst2019; 37: 4929–4936.
25.
WelchCSchmidtMIllmannLDreizlerABöhmB.The influence of flow on cycle-to-cycle variations in a spark-ignition engine: a parametric investigation of increasing exhaust gas recirculation levels. Flow Turbul Combust2023; 110: 185–208.
26.
BaumEPetersonBBöhmBDreizlerA.On the validation of LES applied to internal combustion engine flows: Part 1: comprehensive experimental database. Flow Turbul Combust2014; 92: 269–297.
27.
SchmidtMDingC-PPetersonBDreizlerABöhmB.Near-wall flame and flow measurements in an optically accessible SI engine. Flow Turbul Combust2021; 106: 597–611.
28.
FreudenhammerDPetersonBDingC-PBoehmBGrundmannS.The influence of cylinder head geometry variations on the volumetric intake flow captured by magnetic resonance velocimetry. SAE Int J Engines2015; 8: 1826–1836.
29.
WelchCSchmidtMKeskinenK, et al. The effects of intake pressure on in-cylinder gas velocities in an optically accessible single-cylinder research engine. SAE technical paper 2020-01-0792, 2020.
30.
RenaudADingC-PJakirlicSDreizlerABöhmB.Experimental characterization of the velocity boundary layer in a motored IC engine. Int J Heat Fluid Flow2018; 71: 366–377.
31.
The MathWorks, Inc. MATLAB Function Reference: entropyfilt. Natick, MA: The MathWorks, Inc, 2021.
32.
The MathWorks, Inc. Image processing toolbox reference: bwskel. Natick, MA: The MathWorks, Inc, 2022.
33.
WörnerMRottenkolberG.Voltage rise anemometry in turbulent flows applied to internal combustion engines. Exp Fluids2021; 62: 132.
34.
ChuHWelchCElmestikawyH, et al. A combined numerical and experimental investigation of cycle-to-cycle variations in an optically accessible spark-ignition engine. Flow Turbul Combust2023; 110: 3–29.
35.
BechtoldB.Violin plots for Matlab: Github Project, 2016.
36.
The MathWorks, Inc. MATLAB function reference: corrcoef. Natick, MA: The MathWorks, Inc, 2021.
