Numerical simulation of windshield defogging process

Abstract

A suite of routines for the prediction of environment moist condensation and evaporation on solid surfaces is presented. The physical problem requires the solution of the airflow field along a (cold) solid surface, the evaluation of the unsteady conduction through the solid itself, and the development of a suitable model for the heat and mass transfer through the thin water layer on the fogged surface. The routines for the unsteady simulation of the water layer development are designed as a purely interfacial procedure, minimizing the exchange of information with both the flow and the conductive solver. This allows the coupling with different solvers. Here, the model is used in connection with a commercial computational fluid dynamics solver, in order to predict the defogging process of a car windshield. The water layer is modelled as a collection of closely packed tiny droplets, leaving a portion of dry area among them. The effect of the contact angle is taken into account, and physical assumptions allow the local ratio of the wet surface to the dry surface to be defined for both the fogging and the defogging process.

Keywords

fogging defogging windshield conjugate heat transfer droplet evaporation condensation

Get full access to this article

View all access options for this article.

References

Chandra

di Marzo

Qiao

Y. M.

Tartarini

Effect of liquid—solid contact angle on droplet evaporation. Fire Safety J., 1996, 27, 141–158.

Crafton

E. F.

Black

W. Z.

Heat transfer and evaporation rates of small liquid droplets on heated horizontal surfaces. Int. J. Heat Mass Transfer, 2004, 47, 1187–1200.

Al-Khalil

Keith

De Witt

Modelling of surface water behaviour on ice protected aircraft components. Int. J. Numer. Meth. Heat Fluid Flow, 1992, 2, 555–571.

Croce

Habashi

W. G.

Thermal analysis of wing and nacelle anti-icing devices. In Computational analysis of convection heat transfer (Eds Comini

Sunden

), 2000, pp. 409–432 (WIT Press, Southampton).

Feddaoui

Mir

Belahmidi

Numerical simulation of mixed convection heat and mass transfer with liquid film cooling along an insulated vertical channel. Int. J. Heat Mass Transfer, 2003, 39 (5–6), 445–453.

Beysens

The formation of dew. Atmospheric Res., 1995, 39, 215–237.

Webb

R. L.

A fundamental understanding of factors affecting frost nucleation. Int. J. Heat Mass Transfer, 2003, 46, 3797–3808.

Kitada

Asano

Kataoka

Hirayama

Numerical analysis of transient defogging pattern on automobile. In Proceedings of the SAE World Congress and Exhibition, Detroit, Michigan, USA, 2002, SAE technical paper 2002–01-0223.

Hassan

M. B.

Petitjean

Deffieux

J. C.

Gilotte

Windshield defogging simulation with comparison to test data. In Proceedings of the SAE International Congress and Exhibition, Detroit, Michigan, USA, 1999, SAE technical paper 1999–01-1202.

10.

Giles

M. B.

Stability in analysis of numerical interface conditions in fluid-structure thermal analysis. Int. J. Numer. Meth. Fluids, 1997, 25, 421–436.

11.

Croce

Beaugendre

Habashi

W. G.

Numerical simulation of heat transfer in mist flows. Numer. Heat Transfer, 2002, 42, 139–152.

12.

Croce

A conjugate heat transfer procedure for gas turbine blades, in heat transfer in gas turbine systems. Ann. N.Y. Acad. Sci., 2001, 934, 273–280.

13.

Chen

Fiebig

Mitra

N. K.

Conjugate heat transfer of a finned oval tube. Part A: Flow patterns. Numer. Heat Transfer, Part A, 1998, 33 (4), 371–385.

14.

Lienhard

A heat transfer handbook, 1981, pp. 526–578 (Prentice-Hall, Englewood Cliffs, New Jersey).

15.

Comini

Croce

Convective heat and mass transfer in tube-fin exchangers under dehumidifying conditions. Numer. Heat Transfer, Part A, 2001, 40, 579–599.

16.

Croce

D'Agaro

Della Mora

Numerical simulation of glass fogging and defogging. Int. J. Comput. Fluid Dynamics, 2005, 19 (6), 437–445.

17.

Margrain

T. H.

Owen

The misting characteristics of spectacle lens. Ophthalmic Physiol. Optics, 1996, 16 (2), 108–114.