Investigation of the influences of tyre—road friction and engine power on motorcycle racing performance by means of the optimal manoeuvre method

Abstract

This paper investigates the influences of the tyre—road friction and of the maximum engine power on the performance of a racing motorcycle. For this purpose the optimal manoeuvre method is applied, which essentially simulates an ideal driver and computes the minimum lap time for a given motorcycle and a given track.

The absolute performance of a racing motorcycle is strictly related to the braking and acceleration capabilities. Braking is limited by front- or rear-tyre skidding and by a stoppie event, whereas acceleration is limited by rear-tyre skidding and by a wheelie event. Furthermore, the engine power constitutes a limiting factor during propulsive phases. Effectively the weights of these limiting factors change with the tyre—road friction condition and with the engine power availability. As a consequence, the manoeuvrability of a racing motorcycle varies and riders need to adjust their strategies properly in order to achieve the best performances allowed in any condition.

For this purpose a simple L-curve manoeuvre is considered in this paper. First, a detailed description is reported, and then brake and acceleration limiting conditions are considered with respect to a reference configuration. Next, a parametric analysis is carried out at variable friction and maximum engine power, and their influences on lap time are examined. Finally, two representative configurations are evidenced, i.e. lower friction and lower power; furthermore, brake and acceleration limiting conditions are derived analytically by means of a simplified motorcycle model. Accordingly, the representative manoeuvres are interpreted, and the influences of the friction and engine power on curve entering and curve exiting using optimal strategies is examined.

Keywords

friction engine power acceleration braking limit lap time

Get full access to this article

View all access options for this article.

References

Spackman

‘The future of Formula One driver training.’

Race Tech. Mag. (January—February 2000).

Biral

Da Lio

‘Modelling drivers with the optimal maneuver method.’ In Proceedings of the Seventh International Conference and Exhibition of the Associazione Tecnica dell'Automobile (ATA 2001), Florence, Italy, 23–25 May 2001, paper 01A1029 (Associazione Tecnica dell'Automobile, Orbassano).

Da Lio

‘Analisi della manovrabilità dei veicoli. Un approccio basato sul controllo ottimo.’

ATA G. Assoc. Tec. Auto. 50 (1) (1997): 35–42

Cossalter

Da Lio

Lot

Fabbri

‘A general method for the evaluation of vehicle manoeuvrability with special emphasis on motorcycles.’

Veh. Syst. Dyn. 31 (2) (1999): 113–135

Da Lio

Cossalter

Biral

Fabbri

‘Evaluation of motorcycle manoeuvrability with the optimal maneuver method.’ SAE paper 983022, 1998.

Bertolazzi

Biral

Da Lio

‘Symbolic-numeric efficient solution of optimal control problems for multibody systems.’

J. Comput. Appl. Math. 185 (2) (2006): 404–421

Garbin

Lot

Biral

‘Enhancing the performance of high-powered motorcycles by a proper definition of geometry and mass distribution.’ SAE paper 2002–01-3345, 2002.

Cossalter

Da Lio

Lot

Fabbri

‘Simulation and performance evaluation of race motorcycle dynamics based on parts of real circuit.’ In

Power two wheels, Proceedings of the ATA International Conference Atti, Pisa, Italy, 14–15 December 1998, pp. 99–112 (Associazione Tecnica dell'Automobile, Orbassano).

Biral

Lot

Peretto

‘Optimization of the layout of a racing motorcycle using the optimal maneuver method.’ In Proceedings of the 20th International Symposium on The dynamics of vehicles on roads and tracks (IAVSD 2007), Berkeley, California, USA, 13–17 August 2007, paper 99 (International Association for Vehicle System Dynamics, Praha).

10.

Biral

Da Lio

‘Metodo della manovra ottima e le sue applicazioni.’ In Proceedings of the 15th AIMETA Congress of Theoretical and Applied Mechanics, Taormina, Italy, 26–29 September 2001 (Associazione Italiana di Meccanica Teorica e Applicata).

11.

Cossalter

Massaro

Bobbo

Peretto

‘Application of the ‘optimal maneuver method’ for enhancing racing motorcycle performance.’ SAE paper 2008–01-2965, 2008. In SAE Int. J. Passeng. Cars - Mech. Syst., 2009, 1(1), 1311–1318.

12.

Biral

Lot

‘An interpretative model of g−g diagrams of racing motorcycle.’ In Proceedings of the Third International Conference on Mechanical Engineering and Mechanics (ICMEM 2009), Beijing, People's Republic of China, 21–23 October 2009, Vol. 2, pp. 1700–1706.

13.

Cossalter

Motorcycle dynamics, 2nd edition, (Lulu.com, Raleigh, North Carolina 2006).